Installing dependencies...
Ok
Downloading l3bashrc...
| --2011-10-17 12:50:23-- http://xgu.ru/lilalo/l3bashrc
| Resolving xgu.ru... 91.205.16.235
| Connecting to xgu.ru|91.205.16.235|:80... connected.
| HTTP request sent, awaiting response... 200 OK
| Length: 7709 (7.5K) [text/plain]
| Saving to: `l3bashrc'
|
| 0K ....... 100% 4.11M=0.002s
|
| 2011-10-17 12:50:23 (4.11 MB/s) - `l3bashrc' saved [7709/7709]
|
Ok
Downloading l3prompt...
| --2011-10-17 12:50:23-- http://xgu.ru/lilalo/l3prompt
| Resolving xgu.ru... 91.205.16.235
| Connecting to xgu.ru|91.205.16.235|:80... connected.
| HTTP request sent, awaiting response... 200 OK
| Length: 234 [text/plain]
| Saving to: `l3prompt'
|
| 0K 100% 34.8M=0s
|
| 2011-10-17 12:50:23 (34.8 MB/s) - `l3prompt' saved [234/234]
|
Ok
Downloading l3-agent...
| --2011-10-17 12:50:23-- http://xgu.ru/lilalo/l3-agent
| Resolving xgu.ru... 91.205.16.235
| Connecting to xgu.ru|91.205.16.235|:80... connected.
| HTTP request sent, awaiting response... 200 OK
| Length: 33439 (33K) [text/plain]
| Saving to: `l3-agent'
|
| 0K .......... .......... .......... .. 100% 5.72M=0.006s
|
| 2011-10-17 12:50:23 (5.72 MB/s) - `l3-agent' saved [33439/33439]
|
| --2011-10-17 12:50:23-- http://xgu.ru/lilalo/l3config.pm
| Resolving xgu.ru... 91.205.16.235
| Connecting to xgu.ru|91.205.16.235|:80... connected.
| HTTP request sent, awaiting response... 200 OK
| Length: 5830 (5.7K) [text/x-perl]
| Saving to: `l3config.pm'
|
| 0K ..... 100% 3.14M=0.002s
|
| 2011-10-17 12:50:23 (3.14 MB/s) - `l3config.pm' saved [5830/5830]
|
| --2011-10-17 12:50:23-- http://xgu.ru/lilalo/l3-config
| Resolving xgu.ru... 91.205.16.235
| Connecting to xgu.ru|91.205.16.235|:80... connected.
| HTTP request sent, awaiting response... 200 OK
| Length: 100 [text/plain]
| Saving to: `l3-config'
|
| 0K 100% 14.8M=0s
|
| 2011-10-17 12:50:23 (14.8 MB/s) - `l3-config' saved [100/100]
|
Ok
Downloading perl modules for l3-agent...
| --2011-10-17 12:50:23-- http://xgu.ru/lilalo//Term-VT102.tar.gz
| Resolving xgu.ru... 91.205.16.235
| Connecting to xgu.ru|91.205.16.235|:80... connected.
| HTTP request sent, awaiting response... 200 OK
| Length: 29802 (29K) [application/x-gzip]
| Saving to: `Term-VT102.tar.gz'
|
| 0K .......... .......... ......... 100% 5.65M=0.005s
|
| 2011-10-17 12:50:23 (5.65 MB/s) - `Term-VT102.tar.gz' saved [29802/29802]
|
| --2011-10-17 12:50:23-- http://xgu.ru/lilalo//Text-Iconv.tar.gz
| Resolving xgu.ru... 91.205.16.235
| Connecting to xgu.ru|91.205.16.235|:80... connected.
| HTTP request sent, awaiting response... 200 OK
| Length: 10454 (10K) [application/x-gzip]
| Saving to: `Text-Iconv.tar.gz'
|
| 0K .......... 100% 4.84M=0.002s
|
| 2011-10-17 12:50:23 (4.84 MB/s) - `Text-Iconv.tar.gz' saved [10454/10454]
|
Ok
Installing perl modules for l3-agent...
| Term-VT102-0.91/
| Term-VT102-0.91/t/
| Term-VT102-0.91/t/07-colour.t
| Term-VT102-0.91/t/testbase
| Term-VT102-0.91/t/02-setsize.t
| Term-VT102-0.91/t/13-xonxoff.t
| Term-VT102-0.91/t/12-cupsvrs.t
| Term-VT102-0.91/t/09-callback.t
| Term-VT102-0.91/t/04-cursor.t
| Term-VT102-0.91/t/10-decaln.t
| Term-VT102-0.91/t/05-scrolling.t
| Term-VT102-0.91/t/11-decscrc.t
| Term-VT102-0.91/t/06-insdel.t
| Term-VT102-0.91/t/14-tabstop.t
| Term-VT102-0.91/t/01-load.t
| Term-VT102-0.91/t/03-text.t
| Term-VT102-0.91/t/08-options.t
| Term-VT102-0.91/MANIFEST
| Term-VT102-0.91/VT102/
| Term-VT102-0.91/VT102/examples/
| Term-VT102-0.91/VT102/examples/ssh-usage.pl
| Term-VT102-0.91/VT102/examples/sanitize-dump.pl
| Term-VT102-0.91/VT102/examples/telnet-usage.pl
| Term-VT102-0.91/Changes
| Term-VT102-0.91/Makefile.PL
| Term-VT102-0.91/VT102.pm
| Term-VT102-0.91/README
| Term-VT102-0.91/TODO
| Term-VT102-0.91/META.yml
| Term-VT102-0.91/INSTALL
| Term-VT102-0.91/COPYING
| Checking if your kit is complete...
| Looks good
| Writing Makefile for Term::VT102
| cp VT102.pm blib/lib/Term/VT102.pm
| cp VT102/examples/ssh-usage.pl blib/lib/Term/VT102/examples/ssh-usage.pl
| cp VT102/examples/telnet-usage.pl blib/lib/Term/VT102/examples/telnet-usage.pl
| cp VT102/examples/sanitize-dump.pl blib/lib/Term/VT102/examples/sanitize-dump.pl
| Manifying blib/man3/Term::VT102.3pm
| Manifying blib/man3/Term::VT102.3pm
| Appending installation info to /usr/local/lib/perl/5.10.1/perllocal.pod
| Text-Iconv-1.7
| Text-Iconv-1.7/t
| Text-Iconv-1.7/t/01_charsets.t
| Text-Iconv-1.7/t/00_load.t
| Text-Iconv-1.7/Iconv.xs
| Text-Iconv-1.7/Changes
| Text-Iconv-1.7/Iconv.pm
| Text-Iconv-1.7/MANIFEST
| Text-Iconv-1.7/typemap
| Text-Iconv-1.7/Makefile.PL
| Text-Iconv-1.7/README
| Text-Iconv-1.7/META.yml
| Checking for iconv ... ok (iconv apparently in libc)
|
| NOTE: If you have multiple iconv implementations installed, you might
| want to make sure that I've found the one you want to use.
| If necessary, you can explicitly specify paths like this:
|
| /usr/bin/perl Makefile.PL LIBS='-L/path/to/lib' INC='-I/path/to/include'
|
| Checking if your kit is complete...
| Looks good
| Writing Makefile for Text::Iconv
| cp Iconv.pm blib/lib/Text/Iconv.pm
| AutoSplitting blib/lib/Text/Iconv.pm (blib/lib/auto/Text/Iconv)
| /usr/bin/perl /usr/share/perl/5.10/ExtUtils/xsubpp -typemap /usr/share/perl/5.10/ExtUtils/typemap -typemap typemap Iconv.xs > Iconv.xsc && mv Iconv.xsc Iconv.c
| cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"1.7\" -DXS_VERSION=\"1.7\" -fPIC "-I/usr/lib/perl/5.10/CORE" Iconv.c
| Running Mkbootstrap for Text::Iconv ()
| chmod 644 Iconv.bs
| rm -f blib/arch/auto/Text/Iconv/Iconv.so
| cc -shared -O2 -g -L/usr/local/lib -fstack-protector Iconv.o -o blib/arch/auto/Text/Iconv/Iconv.so \
| \
|
| chmod 755 blib/arch/auto/Text/Iconv/Iconv.so
| cp Iconv.bs blib/arch/auto/Text/Iconv/Iconv.bs
| chmod 644 blib/arch/auto/Text/Iconv/Iconv.bs
| Manifying blib/man3/Text::Iconv.3pm
| Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
| Installing /usr/local/lib/perl/5.10.1/auto/Text/Iconv/Iconv.so
| Appending installation info to /usr/local/lib/perl/5.10.1/perllocal.pod
Ok
Installing l3bashrc to users home directories...
| ++ for user in '$users'
| +++ get_user_home root
| +++ uname -a
| +++ grep -qi freebsd
| +++ getent passwd root
| +++ awk -F: '{print $6}'
| ++ user_home=/root
| ++ mkdir -p /root/.lilalo
| ++ mkdir /etc/lilalo/
| mkdir: cannot create directory `/etc/lilalo/': File exists
| ++ cp l3config.pm /etc/lilalo/
| ++ cp l3-agent /usr/local/bin
| ++ cp l3-config /usr/local/bin
| +++ which bash
| ++ ln -s /bin/bash /usr/local/bin/l3script
| ln: creating symbolic link `/usr/local/bin/l3script': File exists
| ++ chmod 755 /usr/local/bin/l3-agent /usr/local/bin/l3-config
| ++ cp l3bashrc /root/.lilalo
| ++ cp l3prompt /root/.lilalo
| ++ chmod 755 /root/.lilalo/l3prompt
| ++ chown -R root /root/.lilalo
| ++ echo l3cd=/users/KAZNA/asterisk/linux8.unix.nt/root
| ++ chown -R root /root/.l3rc
| ++ for user in '$users'
| +++ get_user_home user
| +++ uname -a
| +++ grep -qi freebsd
| +++ getent passwd user
| +++ awk -F: '{print $6}'
| ++ user_home=/home/user
| ++ mkdir -p /home/user/.lilalo
| ++ mkdir /etc/lilalo/
| mkdir: cannot create directory `/etc/lilalo/': File exists
| ++ cp l3config.pm /etc/lilalo/
| ++ cp l3-agent /usr/local/bin
| ++ cp l3-config /usr/local/bin
| +++ which bash
| ++ ln -s /bin/bash /usr/local/bin/l3script
| ln: creating symbolic link `/usr/local/bin/l3script': File exists
| ++ chmod 755 /usr/local/bin/l3-agent /usr/local/bin/l3-config
| ++ cp l3bashrc /home/user/.lilalo
| ++ cp l3prompt /home/user/.lilalo
| ++ chmod 755 /home/user/.lilalo/l3prompt
| ++ chown -R user /home/user/.lilalo
| ++ echo l3cd=/users/KAZNA/asterisk/linux8.unix.nt/user
| ++ chown -R user /home/user/.l3rc
| ++ set +x
Ok
Adding l3bashrc invocation to ~/.bashrc ...
Ok
Adding l3-agent invocation to ~/.bash_profile ...
Ok
Installation is successfully completed.
Now restart your shell or relogin
to start script writing.
Your current lilalo context is /users/KAZNA/asterisk/linux8.unix.nt/USER
If you use xgu.ru backend, your labs will be available at
http://xgu.ru/l3//users/KAZNA/asterisk/linux8.unix.nt
Use commands
$ l3cd /users/KAZNA/MY-NEW-CONTEXT/linux8.unix.nt/USER
$ l3pwd
to change and to know your current context.
For further information see http://xgu.ru/lilalo/ (in Russian).
Thank you gor using LiLaLo.
Happy Labbing!
(don't forget to restart bash or relogin)