/l3/users/gnatishen/nt-voip/linux3.unix.nt/root :1 :2 :3 :4 :5 :6 :7 :8 :9 :10 :11 :12 :13 :14 :15 |
|
#ping 192.168.10.1
PING 192.168.10.1 (192.168.10.1) 56(84) bytes of data. 64 bytes from 192.168.10.1: icmp_req=1 ttl=63 time=0.203 ms 64 bytes from 192.168.10.1: icmp_req=2 ttl=63 time=0.299 ms 64 bytes from 192.168.10.1: icmp_req=3 ttl=63 time=0.295 ms ^C --- 192.168.10.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.203/0.265/0.299/0.048 ms |
#ping 192.168.40.1
PING 192.168.40.1 (192.168.40.1) 56(84) bytes of data. ^C --- 192.168.40.1 ping statistics --- 33 packets transmitted, 0 received, 100% packet loss, time 32255ms |
#ping 192.168.40.1
PING 192.168.40.1 (192.168.40.1) 56(84) bytes of data. ^C --- 192.168.40.1 ping statistics --- 33 packets transmitted, 0 received, 100% packet loss, time 32255ms |
#This file describes the network interfaces available on your system
PING ya.ru (213.180.204.3) 56(84) bytes of data. 64 bytes from www.yandex.ru (213.180.204.3): icmp_req=1 ttl=55 time=21.7 ms 64 bytes from www.yandex.ru (213.180.204.3): icmp_req=2 ttl=58 time=19.9 ms ^C --- ya.ru ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 19.990/20.858/21.727/0.880 ms |
#This file describes the network interfaces available on your system
PING ya.ru (213.180.204.3) 56(84) bytes of data. 64 bytes from www.yandex.ru (213.180.204.3): icmp_req=1 ttl=55 time=21.7 ms 64 bytes from www.yandex.ru (213.180.204.3): icmp_req=2 ttl=58 time=19.9 ms ^C --- ya.ru ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 19.990/20.858/21.727/0.880 ms |
#apt-get install bash-completion
Чтение списков пакетов... Готово Построение дерева зависимостей Чтение информации о состоянии... Готово Уже установлена самая новая версия bash-completion. обновлено 0, установлено 0 новых пакетов, для удаления отмечено 0 пакетов, и 10 пакетов не обновлено. |
#apt-get install bash-completion
Чтение списков пакетов... Готово Построение дерева зависимостей Чтение информации о состоянии... Готово Уже установлена самая новая версия bash-completion. обновлено 0, установлено 0 новых пакетов, для удаления отмечено 0 пакетов, и 10 пакетов не обновлено. |
#w
15:15:18 up 1:45, 8 users, load average: 0,04, 0,12, 0,13 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT root tty1 16:30 ? 0.21s 0.18s -bash root tty2 16:33 56:46 0.27s 0.24s -bash user tty3 14:00 1:15m 0.27s 0.24s -bash user tty7 :0 14:01 ? 1:10 0.08s x-session-manager root pts/5 :pts/4:S.0 14:24 16:43 0.10s 0.10s script -f -c /bin/bash -q /root/.lilalo//1867413897458925133-1365420277.script root pts/7 :pts/4:S.1 14:26 49:05 0.00s 0.00s script -f -c /bin/bash -q /root/.lilalo//2063623487250745097-1365420366.script user pts/9 :0.0 14:28 0.00s 0.32s 7.61s gnome-terminal user pts/10 :0.0 14:58 11:45 0.19s 7.61s gnome-terminal |
#w
15:15:18 up 1:45, 8 users, load average: 0,04, 0,12, 0,13 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT root tty1 16:30 ? 0.21s 0.18s -bash root tty2 16:33 56:46 0.27s 0.24s -bash user tty3 14:00 1:15m 0.27s 0.24s -bash user tty7 :0 14:01 ? 1:10 0.08s x-session-manager root pts/5 :pts/4:S.0 14:24 16:43 0.10s 0.10s script -f -c /bin/bash -q /root/.lilalo//1867413897458925133-1365420277.script root pts/7 :pts/4:S.1 14:26 49:05 0.00s 0.00s script -f -c /bin/bash -q /root/.lilalo//2063623487250745097-1365420366.script user pts/9 :0.0 14:28 0.00s 0.32s 7.61s gnome-terminal user pts/10 :0.0 14:58 11:45 0.19s 7.61s gnome-terminal |
#apt-cache search dhcp-server
isc-dhcp-server-dbg - ISC DHCP server for automatic IP address assignment (debug) isc-dhcp-server - сервер DHCP от ISC для автоматического выделения IP-адресов isc-dhcp-server-ldap - сервер DHCP, позволяющий использовать LDAP в качестве хранилища |
#apt-cache search dhcp-server
isc-dhcp-server-dbg - ISC DHCP server for automatic IP address assignment (debug) isc-dhcp-server - сервер DHCP от ISC для автоматического выделения IP-адресов isc-dhcp-server-ldap - сервер DHCP, позволяющий использовать LDAP в качестве хранилища |
#apt-cache search dhcp
ahcpd - the Ad-Hoc Configuration Protocol arpon - versatile anti ARP poisoning daemon autodns-dhcp - Automatic DNS updates for DHCP batctl - B.A.T.M.A.N. advanced control and management tool batman-adv-dkms - DKMS Source for the batman-advanced kernel module batman-adv-source - Source for the batman-advanced kernel module bootp - server for the bootp protocol with DHCP support udhcpc - Provides the busybox DHCP client implementation udhcpd - Provides the busybox DHCP server implementation connman-dev - Development files for connman ... isc-dhcp-server - сервер DHCP от ISC для автоматического выделения IP-адресов isc-dhcp-server-ldap - сервер DHCP, позволяющий использовать LDAP в качестве хранилища libnm-glib2 - управление сетевыми подключениями (динамическая библиотека GLib) libnm-util1 - управление сетевыми подключениями (разделяемая библиотека) network-manager - служба управления сетевыми подключениями network-manager-gnome - управление сетевыми подключениями (интерфейс GNOME) openvpn - служба виртуальной частной сети resolvconf - обработчик информации о DNS-серверах whereami - перенастройка системы (лэптопа) при смене физического месторасположения busybox - Tiny utilities for small and embedded systems |
#apt-cache search dhcp
ahcpd - the Ad-Hoc Configuration Protocol arpon - versatile anti ARP poisoning daemon autodns-dhcp - Automatic DNS updates for DHCP batctl - B.A.T.M.A.N. advanced control and management tool batman-adv-dkms - DKMS Source for the batman-advanced kernel module batman-adv-source - Source for the batman-advanced kernel module bootp - server for the bootp protocol with DHCP support udhcpc - Provides the busybox DHCP client implementation udhcpd - Provides the busybox DHCP server implementation connman-dev - Development files for connman ... isc-dhcp-server - сервер DHCP от ISC для автоматического выделения IP-адресов isc-dhcp-server-ldap - сервер DHCP, позволяющий использовать LDAP в качестве хранилища libnm-glib2 - управление сетевыми подключениями (динамическая библиотека GLib) libnm-util1 - управление сетевыми подключениями (разделяемая библиотека) network-manager - служба управления сетевыми подключениями network-manager-gnome - управление сетевыми подключениями (интерфейс GNOME) openvpn - служба виртуальной частной сети resolvconf - обработчик информации о DNS-серверах whereami - перенастройка системы (лэптопа) при смене физического месторасположения busybox - Tiny utilities for small and embedded systems |
#apt-get install isc-dhcp-server
Чтение списков пакетов... Готово Построение дерева зависимостей Чтение информации о состоянии... Готово Предлагаемые пакеты: isc-dhcp-server-ldap НОВЫЕ пакеты, которые будут установлены: isc-dhcp-server обновлено 0, установлено 1 новых пакетов, для удаления отмечено 0 пакетов, и 10 пакетов не обновлено. Необходимо скачать 378 kБ архивов. После данной операции, объём занятого дискового пространства возрастёт на 889 kB. ... Предварительная настройка пакетов ... Выбор ранее не выбранного пакета isc-dhcp-server. (Чтение базы данных ... на данный момент установлен 111971 файл и каталог.) Распаковывается пакет isc-dhcp-server (из файла .../isc-dhcp-server_4.1.1-P1-15+squeeze8_i386.deb)... Обрабатываются триггеры для man-db ... Настраивается пакет isc-dhcp-server (4.1.1-P1-15+squeeze8) ... Generating /etc/default/isc-dhcp-server... Starting ISC DHCP server: dhcpdcheck syslog for diagnostics. ... failed! failed! invoke-rc.d: initscript isc-dhcp-server, action "start" failed. |
#apt-get install isc-dhcp-server
Чтение списков пакетов... Готово Построение дерева зависимостей Чтение информации о состоянии... Готово Предлагаемые пакеты: isc-dhcp-server-ldap НОВЫЕ пакеты, которые будут установлены: isc-dhcp-server обновлено 0, установлено 1 новых пакетов, для удаления отмечено 0 пакетов, и 10 пакетов не обновлено. Необходимо скачать 378 kБ архивов. После данной операции, объём занятого дискового пространства возрастёт на 889 kB. ... Предварительная настройка пакетов ... Выбор ранее не выбранного пакета isc-dhcp-server. (Чтение базы данных ... на данный момент установлен 111971 файл и каталог.) Распаковывается пакет isc-dhcp-server (из файла .../isc-dhcp-server_4.1.1-P1-15+squeeze8_i386.deb)... Обрабатываются триггеры для man-db ... Настраивается пакет isc-dhcp-server (4.1.1-P1-15+squeeze8) ... Generating /etc/default/isc-dhcp-server... Starting ISC DHCP server: dhcpdcheck syslog for diagnostics. ... failed! failed! invoke-rc.d: initscript isc-dhcp-server, action "start" failed. |
#nano /etc/dhcp/dhcpd.conf
--- /tmp/l3-saved-1784.2085.22213 2013-04-08 15:17:34.000000000 +0300 +++ /etc/dhcp/dhcpd.conf 2013-04-08 15:24:47.000000000 +0300 @@ -10,8 +10,8 @@ ddns-update-style none; # option definitions common to all supported networks... -option domain-name "example.org"; -option domain-name-servers ns1.example.org, ns2.example.org; +option domain-name "linux3.unix.nt"; +option domain-name-servers 192.168.15.253; default-lease-time 600; max-lease-time 7200; @@ -32,6 +32,11 @@ # This is a very basic subnet declaration. +subnet 192.168.30.0 netmask 255.255.255.0 { | + range 192.168.30.100 192.168.30.200; | + option routers 192.168.30.254; | +} + #subnet 10.254.239.0 netmask 255.255.255.224 { # range 10.254.239.10 10.254.239.20; # option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; @@ -47,8 +52,8 @@ #} # A slightly different configuration for an internal subnet. -#subnet 10.5.5.0 netmask 255.255.255.224 { -# range 10.5.5.26 10.5.5.30; +#subnet 192.168.30.0 netmask 255.255.255.0 { +# range 192.168.30.100 192.168.30.200; # option domain-name-servers ns1.internal.example.org; # option domain-name "internal.example.org"; # option routers 10.5.5.1; |
#/etc/init.d/
acpid bootlogd cron hostname.sh keyboard-setup mountkernfs.sh nfs-common reboot ssh umountnfs.sh alsa-utils bootlogs dbus hwclockfirst.sh killprocs mountnfs-bootclean.sh portmap rmnologin stop-bootlogd umountroot anacron bootmisc.sh exim4 hwclock.sh loadcpufreq mountnfs.sh pppd-dns rsyslog stop-bootlogd-single unattended-upgrades atd checkfs.sh fuse ifupdown module-init-tools mountoverflowtmp procps saned sudo urandom avahi-daemon checkroot.sh gdm3 ifupdown-clean mountall-bootclean.sh mtab.sh rc screen-cleanup udev x11-common binfmt-support console-setup halt isc-dhcp-server mountall.sh networking rc.local sendsigs udev-mtab bluetooth cpufrequtils hdparm kbd mountdevsubfs.sh network-manager rcS single umountfs |
#/etc/init.d/
acpid bootlogd cron hostname.sh keyboard-setup mountkernfs.sh nfs-common reboot ssh umountnfs.sh alsa-utils bootlogs dbus hwclockfirst.sh killprocs mountnfs-bootclean.sh portmap rmnologin stop-bootlogd umountroot anacron bootmisc.sh exim4 hwclock.sh loadcpufreq mountnfs.sh pppd-dns rsyslog stop-bootlogd-single unattended-upgrades atd checkfs.sh fuse ifupdown module-init-tools mountoverflowtmp procps saned sudo urandom avahi-daemon checkroot.sh gdm3 ifupdown-clean mountall-bootclean.sh mtab.sh rc screen-cleanup udev x11-common binfmt-support console-setup halt isc-dhcp-server mountall.sh networking rc.local sendsigs udev-mtab bluetooth cpufrequtils hdparm kbd mountdevsubfs.sh network-manager rcS single umountfs |
#/etc/init.d/isc-dhcp-server restart
dhcpd self-test failed. Please fix the config file. The error was: Internet Systems Consortium DHCP Server 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ /etc/dhcp/dhcpd.conf line 35: expecting a parameter or declaration subnet 192.168.30.0 netmask 255.255.255.0 { ^ /etc/dhcp/dhcpd.conf line 36: expecting a parameter or declaration range 192.168.30.100 192.168.30.200; ^ /etc/dhcp/dhcpd.conf line 37: expecting a parameter or declaration option routers 192.168.30.254; ^ /etc/dhcp/dhcpd.conf line 38: unexpected end of file #} ^ Configuration file errors encountered -- exiting |
#/etc/init.d/isc-dhcp-server restart
dhcpd self-test failed. Please fix the config file. The error was: Internet Systems Consortium DHCP Server 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ /etc/dhcp/dhcpd.conf line 35: expecting a parameter or declaration subnet 192.168.30.0 netmask 255.255.255.0 { ^ /etc/dhcp/dhcpd.conf line 36: expecting a parameter or declaration range 192.168.30.100 192.168.30.200; ^ /etc/dhcp/dhcpd.conf line 37: expecting a parameter or declaration option routers 192.168.30.254; ^ /etc/dhcp/dhcpd.conf line 38: unexpected end of file #} ^ Configuration file errors encountered -- exiting |
#/etc/init.d/isc-dhcp-server status
Status of ISC DHCP server: dhcpd is running. |
#cat /var/log/
alternatives.log boot debug exim4/ gdm3/ lpr.log mail.warn pycentral.log wtmp apt/ btmp dmesg faillog installer/ mail.err messages syslog Xorg.0.log aptitude ConsoleKit/ dmesg.0 fontconfig.log kern.log mail.info news/ unattended-upgrades/ auth.log daemon.log dpkg.log fsck/ lastlog mail.log pm-powersave.log user.log |
#cat /var/log/
alternatives.log boot debug exim4/ gdm3/ lpr.log mail.warn pycentral.log wtmp apt/ btmp dmesg faillog installer/ mail.err messages syslog Xorg.0.log aptitude ConsoleKit/ dmesg.0 fontconfig.log kern.log mail.info news/ unattended-upgrades/ auth.log daemon.log dpkg.log fsck/ lastlog mail.log pm-powersave.log user.log |
#cat /var/log/messages
Apr 8 16:29:56 linux3 kernel: imklog 4.6.4, log source = /proc/kmsg started. Apr 8 16:29:56 linux3 rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="900" x-info="http://www.rsyslog.com"] (re)start Apr 8 16:29:56 linux3 kernel: [ 0.000000] Initializing cgroup subsys cpuset Apr 8 16:29:56 linux3 kernel: [ 0.000000] Initializing cgroup subsys cpu Apr 8 16:29:56 linux3 kernel: [ 0.000000] Linux version 2.6.39-bpo.2-686-pae (Debian 2.6.39-3~bpo60+1) (norbert@tretkowski.de) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Thu Aug 4 11:02:22 UTC 2011 Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-provided physical RAM map: Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) ... Apr 8 15:27:17 linux3 dhcpd: All rights reserved. Apr 8 15:27:17 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:27:17 linux3 dhcpd: Wrote 0 leases to leases file. Apr 8 15:30:24 linux3 dhcpd: DHCPREQUEST for 10.0.10.26 from 30:85:a9:0f:5d:47 via eth0: ignored (not authoritative). Apr 8 15:30:26 linux3 dhcpd: DHCPREQUEST for 10.0.10.26 from 30:85:a9:0f:5d:47 via eth0: ignored (not authoritative). Apr 8 15:30:32 linux3 dhcpd: DHCPREQUEST for 10.0.10.26 from 30:85:a9:0f:5d:47 via eth0: ignored (not authoritative). Apr 8 15:30:41 linux3 dhcpd: DHCPDISCOVER from 30:85:a9:0f:5d:47 via eth0 Apr 8 15:30:42 linux3 dhcpd: DHCPOFFER on 192.168.30.100 to 30:85:a9:0f:5d:47 (it-notebook) via eth0 Apr 8 15:30:42 linux3 dhcpd: DHCPREQUEST for 192.168.30.100 (192.168.30.1) from 30:85:a9:0f:5d:47 (it-notebook) via eth0 Apr 8 15:30:42 linux3 dhcpd: DHCPACK on 192.168.30.100 to 30:85:a9:0f:5d:47 (it-notebook) via eth0 |
#cat /var/log/messages
Apr 8 16:29:56 linux3 kernel: imklog 4.6.4, log source = /proc/kmsg started. Apr 8 16:29:56 linux3 rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="900" x-info="http://www.rsyslog.com"] (re)start Apr 8 16:29:56 linux3 kernel: [ 0.000000] Initializing cgroup subsys cpuset Apr 8 16:29:56 linux3 kernel: [ 0.000000] Initializing cgroup subsys cpu Apr 8 16:29:56 linux3 kernel: [ 0.000000] Linux version 2.6.39-bpo.2-686-pae (Debian 2.6.39-3~bpo60+1) (norbert@tretkowski.de) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Thu Aug 4 11:02:22 UTC 2011 Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-provided physical RAM map: Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) ... Apr 8 15:27:17 linux3 dhcpd: All rights reserved. Apr 8 15:27:17 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:27:17 linux3 dhcpd: Wrote 0 leases to leases file. Apr 8 15:30:24 linux3 dhcpd: DHCPREQUEST for 10.0.10.26 from 30:85:a9:0f:5d:47 via eth0: ignored (not authoritative). Apr 8 15:30:26 linux3 dhcpd: DHCPREQUEST for 10.0.10.26 from 30:85:a9:0f:5d:47 via eth0: ignored (not authoritative). Apr 8 15:30:32 linux3 dhcpd: DHCPREQUEST for 10.0.10.26 from 30:85:a9:0f:5d:47 via eth0: ignored (not authoritative). Apr 8 15:30:41 linux3 dhcpd: DHCPDISCOVER from 30:85:a9:0f:5d:47 via eth0 Apr 8 15:30:42 linux3 dhcpd: DHCPOFFER on 192.168.30.100 to 30:85:a9:0f:5d:47 (it-notebook) via eth0 Apr 8 15:30:42 linux3 dhcpd: DHCPREQUEST for 192.168.30.100 (192.168.30.1) from 30:85:a9:0f:5d:47 (it-notebook) via eth0 Apr 8 15:30:42 linux3 dhcpd: DHCPACK on 192.168.30.100 to 30:85:a9:0f:5d:47 (it-notebook) via eth0 |
#nano /etc/default/isc-dhcp-server
--- /tmp/l3-saved-1784.10160.10379 2013-04-08 15:35:58.000000000 +0300 +++ /etc/default/isc-dhcp-server 2013-04-08 15:36:11.000000000 +0300 @@ -8,4 +8,4 @@ # On what interfaces should the DHCP server (dhcpd) serve DHCP requests? # Separate multiple interfaces with spaces, e.g. "eth0 eth1". -INTERFACES="" +INTERFACES="eth0" |
#tail -f
tail: предупреждение: бесконечное слежение за стандартным вводом неэффективно ^C |
#tail -f
tail: предупреждение: бесконечное слежение за стандартным вводом неэффективно ^C |
#tail -f /var/log/messages
Apr 8 15:36:15 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:36:17 linux3 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1 Apr 8 15:36:17 linux3 dhcpd: Copyright 2004-2010 Internet Systems Consortium. Apr 8 15:36:17 linux3 dhcpd: All rights reserved. Apr 8 15:36:17 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:36:17 linux3 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1 Apr 8 15:36:17 linux3 dhcpd: Copyright 2004-2010 Internet Systems Consortium. Apr 8 15:36:17 linux3 dhcpd: All rights reserved. Apr 8 15:36:17 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:36:17 linux3 dhcpd: Wrote 1 leases to leases file. Apr 8 15:40:24 linux3 dhcpd: DHCPREQUEST for 192.168.30.100 from 30:85:a9:0f:5d:47 (it-notebook) via eth0 Apr 8 15:40:24 linux3 dhcpd: DHCPACK on 192.168.30.100 to 30:85:a9:0f:5d:47 (it-notebook) via eth0 ^C |
#tail -f /var/log/messages
Apr 8 15:36:15 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:36:17 linux3 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1 Apr 8 15:36:17 linux3 dhcpd: Copyright 2004-2010 Internet Systems Consortium. Apr 8 15:36:17 linux3 dhcpd: All rights reserved. Apr 8 15:36:17 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:36:17 linux3 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1 Apr 8 15:36:17 linux3 dhcpd: Copyright 2004-2010 Internet Systems Consortium. Apr 8 15:36:17 linux3 dhcpd: All rights reserved. Apr 8 15:36:17 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:36:17 linux3 dhcpd: Wrote 1 leases to leases file. Apr 8 15:40:24 linux3 dhcpd: DHCPREQUEST for 192.168.30.100 from 30:85:a9:0f:5d:47 (it-notebook) via eth0 Apr 8 15:40:24 linux3 dhcpd: DHCPACK on 192.168.30.100 to 30:85:a9:0f:5d:47 (it-notebook) via eth0 ^C |
#apt-get install asterisk asterisk-config sterisk-sounds-main asterisk-sounds-extra
Чтение списков пакетов... Готово Построение дерева зависимостей Чтение информации о состоянии... Готово E: Не удалось найти пакет sterisk-sounds-main |
#apt-get install asterisk asterisk-config sterisk-sounds-main asterisk-sounds-extra
Чтение списков пакетов... Готово Построение дерева зависимостей Чтение информации о состоянии... Готово E: Не удалось найти пакет sterisk-sounds-main |
#apt-get install asterisk asterisk-config asterisk-sounds-main asterisk-sounds-extra
ÐаÑÑÑойка пакеÑа ââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââ⤠ÐаÑÑÑаиваеÑÑÑ Ð¿Ð°ÐºÐµÑ libvpb0 âââââââââââââââââ â ÐдеÑÑ Ð·Ð°Ð´Ð°ÑÑÑÑ ÐºÐ¾Ð´ Ñегиона ваÑей ÑелеÑонной ÑиÑÑÐµÐ¼Ñ (напÑимеÑ, 61 -- ÐвÑÑÑалиÑ, 7 -- РоÑÑиÑ). Ðн иÑполÑзÑеÑÑÑ Ð´Ð»Ñ Ð½Ð°ÑÑÑойки ÑегионалÑнÑÑ ÑÑандаÑÑов по ÑмолÑаниÑ, коÑоÑÑе должно ÑоблÑдаÑÑ Ð¾Ð±Ð¾ÑÑдование ÑелеÑонии Voicetroni â â â ТелеÑоннÑй код, ÑоглаÑно ITU-T: â â â â380______________________________________________________________________________________________________________________________________________________________________________________________________________________________ â â â â <Ok> â â â ... ÐаÑÑÑаиваеÑÑÑ Ð¿Ð°ÐºÐµÑ unixodbc (2.2.14p2-1) ... ÐаÑÑÑаиваеÑÑÑ Ð¿Ð°ÐºÐµÑ asterisk (1:1.6.2.9-2+squeeze10) ... Adding system user for Asterisk ÐобавлÑеÑÑÑ Ð¿Ð¾Ð»ÑзоваÑÐµÐ»Ñ Â«asterisk» в гÑÑÐ¿Ð¿Ñ Â«dialout» ... Ðобавление полÑзоваÑÐµÐ»Ñ asterisk в гÑÑÐ¿Ð¿Ñ dialout ÐоÑово. ÐобавлÑеÑÑÑ Ð¿Ð¾Ð»ÑзоваÑÐµÐ»Ñ Â«asterisk» в гÑÑÐ¿Ð¿Ñ Â«audio» ... Ðобавление полÑзоваÑÐµÐ»Ñ asterisk в гÑÑÐ¿Ð¿Ñ audio ÐоÑово. Starting Asterisk PBX: asterisk. |
#apt-get install asterisk asterisk-config asterisk-sounds-main asterisk-sounds-extra
ÐаÑÑÑойка пакеÑа ââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââââ⤠ÐаÑÑÑаиваеÑÑÑ Ð¿Ð°ÐºÐµÑ libvpb0 âââââââââââââââââ â ÐдеÑÑ Ð·Ð°Ð´Ð°ÑÑÑÑ ÐºÐ¾Ð´ Ñегиона ваÑей ÑелеÑонной ÑиÑÑÐµÐ¼Ñ (напÑимеÑ, 61 -- ÐвÑÑÑалиÑ, 7 -- РоÑÑиÑ). Ðн иÑполÑзÑеÑÑÑ Ð´Ð»Ñ Ð½Ð°ÑÑÑойки ÑегионалÑнÑÑ ÑÑандаÑÑов по ÑмолÑаниÑ, коÑоÑÑе должно ÑоблÑдаÑÑ Ð¾Ð±Ð¾ÑÑдование ÑелеÑонии Voicetroni â â â ТелеÑоннÑй код, ÑоглаÑно ITU-T: â â â â380______________________________________________________________________________________________________________________________________________________________________________________________________________________________ â â â â <Ok> â â â ... ÐаÑÑÑаиваеÑÑÑ Ð¿Ð°ÐºÐµÑ unixodbc (2.2.14p2-1) ... ÐаÑÑÑаиваеÑÑÑ Ð¿Ð°ÐºÐµÑ asterisk (1:1.6.2.9-2+squeeze10) ... Adding system user for Asterisk ÐобавлÑеÑÑÑ Ð¿Ð¾Ð»ÑзоваÑÐµÐ»Ñ Â«asterisk» в гÑÑÐ¿Ð¿Ñ Â«dialout» ... Ðобавление полÑзоваÑÐµÐ»Ñ asterisk в гÑÑÐ¿Ð¿Ñ dialout ÐоÑово. ÐобавлÑеÑÑÑ Ð¿Ð¾Ð»ÑзоваÑÐµÐ»Ñ Â«asterisk» в гÑÑÐ¿Ð¿Ñ Â«audio» ... Ðобавление полÑзоваÑÐµÐ»Ñ asterisk в гÑÑÐ¿Ð¿Ñ audio ÐоÑово. Starting Asterisk PBX: asterisk. |
#ls /etc/asterisk/
adsi.conf cdr_adaptive_odbc.conf cli_aliases.conf enum.conf func_odbc.conf logger.conf muted.conf res_odbc.conf sla.conf adtranvofr.conf cdr.conf cli.conf extconfig.conf gtalk.conf manager.conf osp.conf res_pgsql.conf smdi.conf agents.conf cdr_custom.conf cli_permissions.conf extensions.ael h323.conf manager.d/ oss.conf res_snmp.conf telcordia-1.adsi ais.conf cdr_manager.conf codecs.conf extensions.conf http.conf meetme.conf phone.conf rpt.conf udptl.conf alarmreceiver.conf cdr_odbc.conf console.conf extensions.lua iax.conf mgcp.conf phoneprov.conf rtp.conf unistim.conf alsa.conf cdr_pgsql.conf dbsep.conf extensions_minivm.conf iaxprov.conf minivm.conf queuerules.conf say.conf usbradio.conf amd.conf cdr_sqlite3_custom.conf dnsmgr.conf features.conf indications.conf misdn.conf queues.conf sip.conf users.conf asterisk.adsi cdr_tds.conf dsp.conf festival.conf jabber.conf modules.conf res_config_sqlite.conf sip_notify.conf voicemail.conf asterisk.conf chan_dahdi.conf dundi.conf followme.conf jingle.conf musiconhold.conf res_ldap.conf skinny.conf vpb.conf |
#ls /etc/asterisk/
adsi.conf cdr_adaptive_odbc.conf cli_aliases.conf enum.conf func_odbc.conf logger.conf muted.conf res_odbc.conf sla.conf adtranvofr.conf cdr.conf cli.conf extconfig.conf gtalk.conf manager.conf osp.conf res_pgsql.conf smdi.conf agents.conf cdr_custom.conf cli_permissions.conf extensions.ael h323.conf manager.d/ oss.conf res_snmp.conf telcordia-1.adsi ais.conf cdr_manager.conf codecs.conf extensions.conf http.conf meetme.conf phone.conf rpt.conf udptl.conf alarmreceiver.conf cdr_odbc.conf console.conf extensions.lua iax.conf mgcp.conf phoneprov.conf rtp.conf unistim.conf alsa.conf cdr_pgsql.conf dbsep.conf extensions_minivm.conf iaxprov.conf minivm.conf queuerules.conf say.conf usbradio.conf amd.conf cdr_sqlite3_custom.conf dnsmgr.conf features.conf indications.conf misdn.conf queues.conf sip.conf users.conf asterisk.adsi cdr_tds.conf dsp.conf festival.conf jabber.conf modules.conf res_config_sqlite.conf sip_notify.conf voicemail.conf asterisk.conf chan_dahdi.conf dundi.conf followme.conf jingle.conf musiconhold.conf res_ldap.conf skinny.conf vpb.conf |
#ls /etc/asterisk/
adsi.conf asterisk.adsi cdr_pgsql.conf codecs.conf extconfig.conf followme.conf indications.conf mgcp.conf oss.conf res_odbc.conf sip_notify.conf usbradio.conf adtranvofr.conf asterisk.conf cdr_sqlite3_custom.conf console.conf extensions.ael func_odbc.conf jabber.conf minivm.conf phone.conf res_pgsql.conf skinny.conf users.conf agents.conf cdr_adaptive_odbc.conf cdr_tds.conf dbsep.conf extensions.conf gtalk.conf jingle.conf misdn.conf phoneprov.conf res_snmp.conf sla.conf voicemail.conf ais.conf cdr.conf chan_dahdi.conf dnsmgr.conf extensions.lua h323.conf logger.conf modules.conf queuerules.conf rpt.conf smdi.conf vpb.conf alarmreceiver.conf cdr_custom.conf cli_aliases.conf dsp.conf extensions_minivm.conf http.conf manager.conf musiconhold.conf queues.conf rtp.conf telcordia-1.adsi alsa.conf cdr_manager.conf cli.conf dundi.conf features.conf iax.conf manager.d muted.conf res_config_sqlite.conf say.conf udptl.conf amd.conf cdr_odbc.conf cli_permissions.conf enum.conf festival.conf iaxprov.conf meetme.conf osp.conf res_ldap.conf sip.conf unistim.conf |
#ls /etc/asterisk/
adsi.conf asterisk.adsi cdr_pgsql.conf codecs.conf extconfig.conf followme.conf indications.conf mgcp.conf oss.conf res_odbc.conf sip_notify.conf usbradio.conf adtranvofr.conf asterisk.conf cdr_sqlite3_custom.conf console.conf extensions.ael func_odbc.conf jabber.conf minivm.conf phone.conf res_pgsql.conf skinny.conf users.conf agents.conf cdr_adaptive_odbc.conf cdr_tds.conf dbsep.conf extensions.conf gtalk.conf jingle.conf misdn.conf phoneprov.conf res_snmp.conf sla.conf voicemail.conf ais.conf cdr.conf chan_dahdi.conf dnsmgr.conf extensions.lua h323.conf logger.conf modules.conf queuerules.conf rpt.conf smdi.conf vpb.conf alarmreceiver.conf cdr_custom.conf cli_aliases.conf dsp.conf extensions_minivm.conf http.conf manager.conf musiconhold.conf queues.conf rtp.conf telcordia-1.adsi alsa.conf cdr_manager.conf cli.conf dundi.conf features.conf iax.conf manager.d muted.conf res_config_sqlite.conf say.conf udptl.conf amd.conf cdr_odbc.conf cli_permissions.conf enum.conf festival.conf iaxprov.conf meetme.conf osp.conf res_ldap.conf sip.conf unistim.conf |
#ping ya.ru
PING ya.ru (213.180.204.3) 56(84) bytes of data. 64 bytes from www.yandex.ru (213.180.204.3): icmp_req=1 ttl=58 time=19.6 ms 64 bytes from www.yandex.ru (213.180.204.3): icmp_req=2 ttl=55 time=19.0 ms ^C --- ya.ru ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 19.087/19.370/19.653/0.283 ms |
#ping ya.ru
PING ya.ru (213.180.204.3) 56(84) bytes of data. 64 bytes from www.yandex.ru (213.180.204.3): icmp_req=1 ttl=58 time=19.6 ms 64 bytes from www.yandex.ru (213.180.204.3): icmp_req=2 ttl=55 time=19.0 ms ^C --- ya.ru ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 19.087/19.370/19.653/0.283 ms |
#/etc/init.d/asterisk restart
Stopping Asterisk PBX: asterisk. Starting Asterisk PBX: asterisk. |
#/etc/init.d/asterisk restart
Stopping Asterisk PBX: asterisk. Starting Asterisk PBX: asterisk. |
#ps aux |grep aster
asterisk 6392 2.1 0.1 48232 18048 ? Ssl 16:32 0:00 /usr/sbin/asterisk -p -U asterisk asterisk 6393 0.0 0.0 2940 568 ? S 16:32 0:00 astcanary /var/run/asterisk/alt.asterisk.canary.tweet.tweet.tweet 6392 root 6438 0.0 0.0 3376 744 pts/2 S+ 16:32 0:00 grep aster |
#ps aux |grep aster
asterisk 6392 2.1 0.1 48232 18048 ? Ssl 16:32 0:00 /usr/sbin/asterisk -p -U asterisk asterisk 6393 0.0 0.0 2940 568 ? S 16:32 0:00 astcanary /var/run/asterisk/alt.asterisk.canary.tweet.tweet.tweet 6392 root 6438 0.0 0.0 3376 744 pts/2 S+ 16:32 0:00 grep aster |
#ps aux |grep aster
asterisk 6392 0.7 0.1 48232 18048 ? Ssl 16:32 0:00 /usr/sbin/asterisk -p -U asterisk asterisk 6393 0.0 0.0 2940 568 ? S 16:32 0:00 astcanary /var/run/asterisk/alt.asterisk.canary.tweet.tweet.tweet 6392 root 6447 0.0 0.0 3376 748 pts/2 S+ 16:33 0:00 grep aster |
#ps aux |grep aster
asterisk 6392 0.7 0.1 48232 18048 ? Ssl 16:32 0:00 /usr/sbin/asterisk -p -U asterisk asterisk 6393 0.0 0.0 2940 568 ? S 16:32 0:00 astcanary /var/run/asterisk/alt.asterisk.canary.tweet.tweet.tweet 6392 root 6447 0.0 0.0 3376 748 pts/2 S+ 16:33 0:00 grep aster |
#mv /etc/asterisk/extensions /etc/asterisk/extensions.conf.ORIG
extensions.ael extensions.conf extensions.lua extensions_minivm.conf |
#mv /etc/asterisk/extensions /etc/asterisk/extensions.conf.ORIG
extensions.ael extensions.conf extensions.lua extensions_minivm.conf |
#nano ./sip.conf
--- /dev/null 2013-04-08 16:29:52.215249703 +0300 +++ ./sip.conf 2013-04-08 16:43:00.000000000 +0300 @@ -0,0 +1,8 @@ +contex=default + +; SIP-peer + +[1301] +type=friend +secret=1234 +host=dynamic |
#contex=default
Asterisk 1.6.2.9-2+squeeze10, Copyright (C) 1999 - 2010 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 1.6.2.9-2+squeeze10 currently running on linux3 (pid = 6392) linux3*CLI> linux3*CLI> linux3*CLI> linux3*CLI> sip relod No such command 'sip relod' (type 'core show help sip relod' for other possible commands) linux3*CLI> sip reload [Apr 8 16:46:44] WARNING[6428]: config.c:1100 process_text_line: parse error: No category context for line 1 of /etc/asterisk/sip.conf [Apr 8 16:46:44] ERROR[6428]: chan_sip.c:24596 reload_config: Contents of sip.conf are invalid and cannot be parsed linux3*CLI> quit |
#contex=default
Asterisk 1.6.2.9-2+squeeze10, Copyright (C) 1999 - 2010 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 1.6.2.9-2+squeeze10 currently running on linux3 (pid = 6392) linux3*CLI> linux3*CLI> linux3*CLI> linux3*CLI> sip relod No such command 'sip relod' (type 'core show help sip relod' for other possible commands) linux3*CLI> sip reload [Apr 8 16:46:44] WARNING[6428]: config.c:1100 process_text_line: parse error: No category context for line 1 of /etc/asterisk/sip.conf [Apr 8 16:46:44] ERROR[6428]: chan_sip.c:24596 reload_config: Contents of sip.conf are invalid and cannot be parsed linux3*CLI> quit |
#nano ./sip.conf
--- /tmp/l3-saved-6269.6705.2489 2013-04-08 16:47:41.000000000 +0300 +++ ./sip.conf 2013-04-08 16:48:06.000000000 +0300 @@ -1,3 +1,4 @@ +[general] contex=default ; SIP-peer |
#asterisk -r
Asterisk 1.6.2.9-2+squeeze10, Copyright (C) 1999 - 2010 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 1.6.2.9-2+squeeze10 currently running on linux3 (pid = 6392) linux3*CLI> sip reload linux3*CLI> core set verbose 3 ... linux3*CLI> sip reload Reloading SIP linux3*CLI> sip show pee peers peer linux3*CLI> sip show peers Name/username Host Dyn Nat ACL Port Status 1301 (Unspecified) D N 5060 Unmonitored 1 sip peers [Monitored: 0 online, 0 offline Unmonitored: 1 online, 0 offline] -- Registered SIP '1301' at 192.168.30.101 port 5060 linux3*CLI> quit |
#asterisk -r
Asterisk 1.6.2.9-2+squeeze10, Copyright (C) 1999 - 2010 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Connected to Asterisk 1.6.2.9-2+squeeze10 currently running on linux3 (pid = 6392) linux3*CLI> sip reload linux3*CLI> core set verbose 3 ... linux3*CLI> sip reload Reloading SIP linux3*CLI> sip show pee peers peer linux3*CLI> sip show peers Name/username Host Dyn Nat ACL Port Status 1301 (Unspecified) D N 5060 Unmonitored 1 sip peers [Monitored: 0 online, 0 offline Unmonitored: 1 online, 0 offline] -- Registered SIP '1301' at 192.168.30.101 port 5060 linux3*CLI> quit |
#nano ./sip.conf
--- /tmp/l3-saved-6269.21131.17736 2013-04-08 17:07:46.000000000 +0300 +++ ./sip.conf 2013-04-08 17:08:26.000000000 +0300 @@ -7,3 +7,13 @@ type=friend secret=1234 host=dynamic + +[1302] +type=friend +secret=1234 +host=dynamic + +[1303] +type=friend +secret=1234 +host=dynamic |
alternatives.log boot debug exim4/ gdm3/ lpr.log mail.warn pycentral.log wtmp apt/ btmp dmesg faillog installer/ mail.err messages syslog Xorg.0.log aptitude ConsoleKit/ dmesg.0 fontconfig.log kern.log mail.info news/ unattended-upgrades/ auth.log daemon.log dpkg.log fsck/ lastlog mail.log pm-powersave.log user.log
daemon.log debug dmesg dmesg.0 dpkg.log
Apr 8 16:29:56 linux3 kernel: imklog 4.6.4, log source = /proc/kmsg started. Apr 8 16:29:56 linux3 rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="900" x-info="http://www.rsyslog.com"] (re)start Apr 8 16:29:56 linux3 kernel: [ 0.000000] Initializing cgroup subsys cpuset Apr 8 16:29:56 linux3 kernel: [ 0.000000] Initializing cgroup subsys cpu Apr 8 16:29:56 linux3 kernel: [ 0.000000] Linux version 2.6.39-bpo.2-686-pae (Debian 2.6.39-3~bpo60+1) (norbert@tretkowski.de) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Thu Aug 4 11:02:22 UTC 2011 Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-provided physical RAM map: Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 0000000040200000 - 00000000cabf4000 (usable) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cabf4000 - 00000000cac41000 (ACPI NVS) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cac41000 - 00000000cac4f000 (ACPI data) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cac4f000 - 00000000cac50000 (ACPI NVS) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cac50000 - 00000000cac68000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cac68000 - 00000000cac79000 (ACPI NVS) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cac79000 - 00000000cad00000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cad00000 - 00000000cad01000 (ACPI NVS) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cad01000 - 00000000cad13000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cad13000 - 00000000cad20000 (ACPI NVS) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cad20000 - 00000000cad31000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cad31000 - 00000000cad74000 (ACPI NVS) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cad74000 - 00000000cb000000 (usable) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000cb800000 - 00000000cfa00000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Apr 8 16:29:56 linux3 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 000000042e600000 (usable) Apr 8 16:29:56 linux3 kernel: [ 0.000000] NX (Execute Disable) protection: active Apr 8 16:29:56 linux3 kernel: [ 0.000000] DMI 2.7 present. Apr 8 16:29:56 linux3 kernel: [ 0.000000] last_pfn = 0x42e600 max_arch_pfn = 0x1000000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Apr 8 16:29:56 linux3 kernel: [ 0.000000] found SMP MP-table at [c00f4b90] f4b90 Apr 8 16:29:56 linux3 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] RAMDISK: 17789000 - 18040000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: RSDP 000fe700 00024 (v02 HPQOEM) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: XSDT cac41070 00064 (v01 HPQOEM SLIC-BPC 01072009 AMI 00010013) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: FACP cac48b98 000F4 (v04 HPQOEM SLIC-BPC 01072009 AMI 00010013) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: DSDT cac41168 07A2A (v02 HPQOEM SLIC-BPC 00000007 INTL 20051117) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: FACS cad17f80 00040 Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: APIC cac48c90 00092 (v03 HPQOEM SLIC-BPC 01072009 AMI 00010013) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: SSDT cac48d28 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: MCFG cac48f00 0003C (v01 HPQOEM SLIC-BPC 01072009 MSFT 00000097) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: HPET cac48f40 00038 (v01 HPQOEM SLIC-BPC 01072009 AMI. 00000004) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: ASF! cac48f78 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: SSDT cac49018 05270 (v01 COMPAQ WMI 00000001 MSFT 03000001) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: DMAR cac4e288 000E8 (v01 ALASKA A M I 00000001 INTL 00000001) Apr 8 16:29:56 linux3 kernel: [ 0.000000] 16236MB HIGHMEM available. Apr 8 16:29:56 linux3 kernel: [ 0.000000] 889MB LOWMEM available. Apr 8 16:29:56 linux3 kernel: [ 0.000000] mapped low ram: 0 - 379fe000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] low ram: 0 - 379fe000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] Zone PFN ranges: Apr 8 16:29:56 linux3 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] Normal 0x00001000 -> 0x000379fe Apr 8 16:29:56 linux3 kernel: [ 0.000000] HighMem 0x000379fe -> 0x0042e600 Apr 8 16:29:56 linux3 kernel: [ 0.000000] Movable zone start PFN for each node Apr 8 16:29:56 linux3 kernel: [ 0.000000] early_node_map[6] active PFN ranges Apr 8 16:29:56 linux3 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009b Apr 8 16:29:56 linux3 kernel: [ 0.000000] 0: 0x00000100 -> 0x00020000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] 0: 0x00020200 -> 0x00040000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] 0: 0x00040200 -> 0x000cabf4 Apr 8 16:29:56 linux3 kernel: [ 0.000000] 0: 0x000cad74 -> 0x000cb000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] 0: 0x00100000 -> 0x0042e600 Apr 8 16:29:56 linux3 kernel: [ 0.000000] Using APIC driver default Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408 Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) Apr 8 16:29:56 linux3 kernel: [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Apr 8 16:29:56 linux3 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Apr 8 16:29:56 linux3 kernel: [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs Apr 8 16:29:56 linux3 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f31c000) Apr 8 16:29:56 linux3 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Apr 8 16:29:56 linux3 kernel: [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1 Apr 8 16:29:56 linux3 kernel: [ 0.000000] PERCPU: Embedded 13 pages/cpu @ef200000 s30976 r0 d22272 u262144 Apr 8 16:29:56 linux3 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4131390 Apr 8 16:29:56 linux3 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-bpo.2-686-pae root=UUID=8df6f1c7-27c7-4bcb-86e7-e088da317181 ro quiet Apr 8 16:29:56 linux3 kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.000000] Initializing CPU#0 Apr 8 16:29:56 linux3 kernel: [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 Apr 8 16:29:56 linux3 kernel: [ 0.000000] Initializing HighMem for node 0 (000379fe:0042e600) Apr 8 16:29:56 linux3 kernel: [ 0.000000] Memory: 16510024k/17537024k available (2786k kernel code, 152548k reserved, 1434k data, 440k init, 15753736k highmem) Apr 8 16:29:56 linux3 kernel: [ 0.000000] virtual kernel memory layout: Apr 8 16:29:56 linux3 kernel: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) Apr 8 16:29:56 linux3 kernel: [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) Apr 8 16:29:56 linux3 kernel: [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) Apr 8 16:29:56 linux3 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) Apr 8 16:29:56 linux3 kernel: [ 0.000000] .init : 0xc1420000 - 0xc148e000 ( 440 kB) Apr 8 16:29:56 linux3 kernel: [ 0.000000] .data : 0xc12b8810 - 0xc141f240 (1434 kB) Apr 8 16:29:56 linux3 kernel: [ 0.000000] .text : 0xc1000000 - 0xc12b8810 (2786 kB) Apr 8 16:29:56 linux3 kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Apr 8 16:29:56 linux3 kernel: [ 0.000000] Hierarchical RCU implementation. Apr 8 16:29:56 linux3 kernel: [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. Apr 8 16:29:56 linux3 kernel: [ 0.000000] RCU-based detection of stalled CPUs is disabled. Apr 8 16:29:56 linux3 kernel: [ 0.000000] NR_IRQS:1280 Apr 8 16:29:56 linux3 kernel: [ 0.000000] Extended CMOS year: 2000 Apr 8 16:29:56 linux3 kernel: [ 0.000000] Console: colour VGA+ 80x25 Apr 8 16:29:56 linux3 kernel: [ 0.000000] console [tty0] enabled Apr 8 16:29:56 linux3 kernel: [ 0.000000] Fast TSC calibration using PIT Apr 8 16:29:56 linux3 kernel: [ 0.004000] Detected 3392.127 MHz processor. Apr 8 16:29:56 linux3 kernel: [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.25 BogoMIPS (lpj=13568508) Apr 8 16:29:56 linux3 kernel: [ 0.000004] pid_max: default: 32768 minimum: 301 Apr 8 16:29:56 linux3 kernel: [ 0.000024] Security Framework initialized Apr 8 16:29:56 linux3 kernel: [ 0.000026] SELinux: Disabled at boot. Apr 8 16:29:56 linux3 kernel: [ 0.000037] Mount-cache hash table entries: 512 Apr 8 16:29:56 linux3 kernel: [ 0.000174] Initializing cgroup subsys ns Apr 8 16:29:56 linux3 kernel: [ 0.000176] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. Apr 8 16:29:56 linux3 kernel: [ 0.000177] Initializing cgroup subsys cpuacct Apr 8 16:29:56 linux3 kernel: [ 0.000201] Initializing cgroup subsys memory Apr 8 16:29:56 linux3 kernel: [ 0.000208] Initializing cgroup subsys devices Apr 8 16:29:56 linux3 kernel: [ 0.000209] Initializing cgroup subsys freezer Apr 8 16:29:56 linux3 kernel: [ 0.000210] Initializing cgroup subsys net_cls Apr 8 16:29:56 linux3 kernel: [ 0.000212] Initializing cgroup subsys blkio Apr 8 16:29:56 linux3 kernel: [ 0.000229] CPU: Physical Processor ID: 0 Apr 8 16:29:56 linux3 kernel: [ 0.000230] CPU: Processor Core ID: 0 Apr 8 16:29:56 linux3 kernel: [ 0.000233] mce: CPU supports 9 MCE banks Apr 8 16:29:56 linux3 kernel: [ 0.000242] CPU0: Thermal monitoring enabled (TM1) Apr 8 16:29:56 linux3 kernel: [ 0.000248] using mwait in idle threads. Apr 8 16:29:56 linux3 kernel: [ 0.001184] ACPI: Core revision 20110316 Apr 8 16:29:56 linux3 kernel: [ 0.003407] Enabling APIC mode: Flat. Using 1 I/O APICs Apr 8 16:29:56 linux3 kernel: [ 0.003966] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Apr 8 16:29:56 linux3 kernel: [ 0.043533] CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping 07 Apr 8 16:29:56 linux3 kernel: [ 0.151053] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. Apr 8 16:29:56 linux3 kernel: [ 0.151057] ... version: 3 Apr 8 16:29:56 linux3 kernel: [ 0.151058] ... bit width: 48 Apr 8 16:29:56 linux3 kernel: [ 0.151059] ... generic registers: 4 Apr 8 16:29:56 linux3 kernel: [ 0.151060] ... value mask: 0000ffffffffffff Apr 8 16:29:56 linux3 kernel: [ 0.151061] ... max period: 000000007fffffff Apr 8 16:29:56 linux3 kernel: [ 0.151061] ... fixed-purpose events: 3 Apr 8 16:29:56 linux3 kernel: [ 0.151062] ... event mask: 000000070000000f Apr 8 16:29:56 linux3 kernel: [ 0.151177] NMI watchdog enabled, takes one hw-pmu counter. Apr 8 16:29:56 linux3 kernel: [ 0.151228] Booting Node 0, Processors #1 Apr 8 16:29:56 linux3 kernel: [ 0.161632] Initializing CPU#1 Apr 8 16:29:56 linux3 kernel: [ 0.258839] NMI watchdog enabled, takes one hw-pmu counter. Apr 8 16:29:56 linux3 kernel: [ 0.258897] #2 Apr 8 16:29:56 linux3 kernel: [ 0.269146] Initializing CPU#2 Apr 8 16:29:56 linux3 kernel: [ 0.366500] NMI watchdog enabled, takes one hw-pmu counter. Apr 8 16:29:56 linux3 kernel: [ 0.366560] #3 Apr 8 16:29:56 linux3 kernel: [ 0.376808] Initializing CPU#3 Apr 8 16:29:56 linux3 kernel: [ 0.474166] NMI watchdog enabled, takes one hw-pmu counter. Apr 8 16:29:56 linux3 kernel: [ 0.474224] #4 Apr 8 16:29:56 linux3 kernel: [ 0.484546] Initializing CPU#4 Apr 8 16:29:56 linux3 kernel: [ 0.581903] NMI watchdog enabled, takes one hw-pmu counter. Apr 8 16:29:56 linux3 kernel: [ 0.581964] #5 Apr 8 16:29:56 linux3 kernel: [ 0.592216] Initializing CPU#5 Apr 8 16:29:56 linux3 kernel: [ 0.689573] NMI watchdog enabled, takes one hw-pmu counter. Apr 8 16:29:56 linux3 kernel: [ 0.689631] #6 Apr 8 16:29:56 linux3 kernel: [ 0.699881] Initializing CPU#6 Apr 8 16:29:56 linux3 kernel: [ 0.797237] NMI watchdog enabled, takes one hw-pmu counter. Apr 8 16:29:56 linux3 kernel: [ 0.797296] #7 Ok. Apr 8 16:29:56 linux3 kernel: [ 0.807544] Initializing CPU#7 Apr 8 16:29:56 linux3 kernel: [ 0.905000] NMI watchdog enabled, takes one hw-pmu counter. Apr 8 16:29:56 linux3 kernel: [ 0.905019] Brought up 8 CPUs Apr 8 16:29:56 linux3 kernel: [ 0.905020] Total of 8 processors activated (54274.11 BogoMIPS). Apr 8 16:29:56 linux3 kernel: [ 0.909521] devtmpfs: initialized Apr 8 16:29:56 linux3 kernel: [ 0.909610] PM: Registering ACPI NVS region at cabf4000 (315392 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.909616] PM: Registering ACPI NVS region at cac4f000 (4096 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.909618] PM: Registering ACPI NVS region at cac68000 (69632 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.909620] PM: Registering ACPI NVS region at cad00000 (4096 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.909621] PM: Registering ACPI NVS region at cad13000 (53248 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.909623] PM: Registering ACPI NVS region at cad31000 (274432 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.909634] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. Apr 8 16:29:56 linux3 kernel: [ 0.909725] print_constraints: dummy: Apr 8 16:29:56 linux3 kernel: [ 0.909766] NET: Registered protocol family 16 Apr 8 16:29:56 linux3 kernel: [ 0.909816] ACPI: bus type pci registered Apr 8 16:29:56 linux3 kernel: [ 0.909888] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Apr 8 16:29:56 linux3 kernel: [ 0.909890] PCI: not using MMCONFIG Apr 8 16:29:56 linux3 kernel: [ 0.919994] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX. Apr 8 16:29:56 linux3 kernel: [ 0.919996] PCI: PCI BIOS revision 3.00 entry at 0xea858, last bus=184 Apr 8 16:29:56 linux3 kernel: [ 0.919997] PCI: Using configuration type 1 for base access Apr 8 16:29:56 linux3 kernel: [ 0.920264] bio: create slab <bio-0> at 0 Apr 8 16:29:56 linux3 kernel: [ 0.921738] ACPI: Executed 1 blocks of module-level executable AML code Apr 8 16:29:56 linux3 kernel: [ 0.923888] ACPI: SSDT cad1f898 006F4 (v01 AMI IST 00000001 MSFT 03000001) Apr 8 16:29:56 linux3 kernel: [ 0.924122] ACPI: Dynamic OEM Table Load: Apr 8 16:29:56 linux3 kernel: [ 0.924124] ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001) Apr 8 16:29:56 linux3 kernel: [ 0.924142] ACPI: SSDT cad16d98 000E4 (v01 AMI CST 00000001 MSFT 03000001) Apr 8 16:29:56 linux3 kernel: [ 0.924308] ACPI: Dynamic OEM Table Load: Apr 8 16:29:56 linux3 kernel: [ 0.924309] ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001) Apr 8 16:29:56 linux3 kernel: [ 0.924885] ACPI: Interpreter enabled Apr 8 16:29:56 linux3 kernel: [ 0.924889] ACPI: (supports S0 S3 S4 S5) Apr 8 16:29:56 linux3 kernel: [ 0.924902] ACPI: Using IOAPIC for interrupt routing Apr 8 16:29:56 linux3 kernel: [ 0.924918] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Apr 8 16:29:56 linux3 kernel: [ 0.924954] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources Apr 8 16:29:56 linux3 kernel: [ 0.924955] PCI: Using MMCONFIG for extended config space Apr 8 16:29:56 linux3 kernel: [ 0.925130] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored Apr 8 16:29:56 linux3 kernel: [ 0.936885] ACPI: No dock devices found. Apr 8 16:29:56 linux3 kernel: [ 0.936887] HEST: Table not found. Apr 8 16:29:56 linux3 kernel: [ 0.936889] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Apr 8 16:29:56 linux3 kernel: [ 0.937033] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Apr 8 16:29:56 linux3 kernel: [ 0.937176] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] Apr 8 16:29:56 linux3 kernel: [ 0.937178] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] Apr 8 16:29:56 linux3 kernel: [ 0.937179] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] Apr 8 16:29:56 linux3 kernel: [ 0.937180] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] Apr 8 16:29:56 linux3 kernel: [ 0.937182] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] Apr 8 16:29:56 linux3 kernel: [ 0.937183] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] Apr 8 16:29:56 linux3 kernel: [ 0.937184] pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xffffffff] Apr 8 16:29:56 linux3 kernel: [ 0.939304] pci 0000:00:1c.0: PCI bridge to [bus 01-01] Apr 8 16:29:56 linux3 kernel: [ 0.939429] pci 0000:00:1c.4: PCI bridge to [bus 02-02] Apr 8 16:29:56 linux3 kernel: [ 0.939552] pci 0000:00:1c.6: PCI bridge to [bus 03-03] Apr 8 16:29:56 linux3 kernel: [ 0.939677] pci 0000:00:1c.7: PCI bridge to [bus 04-04] Apr 8 16:29:56 linux3 kernel: [ 0.939873] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) Apr 8 16:29:56 linux3 kernel: [ 0.940218] pci0000:00: Requesting ACPI _OSC control (0x1d) Apr 8 16:29:56 linux3 kernel: [ 0.940299] pci0000:00: ACPI _OSC control (0x1d) granted Apr 8 16:29:56 linux3 kernel: [ 0.943480] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) Apr 8 16:29:56 linux3 kernel: [ 0.943515] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) Apr 8 16:29:56 linux3 kernel: [ 0.943548] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) Apr 8 16:29:56 linux3 kernel: [ 0.943583] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) Apr 8 16:29:56 linux3 kernel: [ 0.943615] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) Apr 8 16:29:56 linux3 kernel: [ 0.943646] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) Apr 8 16:29:56 linux3 kernel: [ 0.943681] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) Apr 8 16:29:56 linux3 kernel: [ 0.943714] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Apr 8 16:29:56 linux3 kernel: [ 0.943768] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Apr 8 16:29:56 linux3 kernel: [ 0.943773] vgaarb: loaded Apr 8 16:29:56 linux3 kernel: [ 0.943791] PCI: Using ACPI for IRQ routing Apr 8 16:29:56 linux3 kernel: [ 0.948118] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 Apr 8 16:29:56 linux3 kernel: [ 0.948122] hpet0: 8 comparators, 64-bit 14.318180 MHz counter Apr 8 16:29:56 linux3 kernel: [ 0.950134] Switching to clocksource hpet Apr 8 16:29:56 linux3 kernel: [ 0.950827] pnp: PnP ACPI init Apr 8 16:29:56 linux3 kernel: [ 0.950833] ACPI: bus type pnp registered Apr 8 16:29:56 linux3 kernel: [ 0.951004] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951005] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951007] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951009] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951010] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951097] system 00:02: [io 0x0620-0x063f] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951099] system 00:02: [io 0x0610-0x061f] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951281] system 00:08: [io 0x04d0-0x04d1] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951781] system 00:0b: [io 0x0400-0x0453] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951783] system 00:0b: [io 0x0458-0x047f] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951784] system 00:0b: [io 0x1180-0x119f] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951786] system 00:0b: [io 0x0500-0x057f] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951787] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951789] system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved Apr 8 16:29:56 linux3 kernel: [ 0.951791] system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951792] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.951834] system 00:0c: [io 0x0454-0x0457] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.952083] system 00:0e: [mem 0xfed40000-0xfed44fff] has been reserved Apr 8 16:29:56 linux3 kernel: [ 0.952086] pnp: PnP ACPI: found 15 devices Apr 8 16:29:56 linux3 kernel: [ 0.952087] ACPI: ACPI bus type pnp unregistered Apr 8 16:29:56 linux3 kernel: [ 0.952089] PnPBIOS: Disabled by ACPI PNP Apr 8 16:29:56 linux3 kernel: [ 0.952730] Switched to NOHz mode on CPU #0 Apr 8 16:29:56 linux3 kernel: [ 0.952776] Switched to NOHz mode on CPU #3 Apr 8 16:29:56 linux3 kernel: [ 0.952783] Switched to NOHz mode on CPU #6 Apr 8 16:29:56 linux3 kernel: [ 0.952794] Switched to NOHz mode on CPU #2 Apr 8 16:29:56 linux3 kernel: [ 0.952808] Switched to NOHz mode on CPU #5 Apr 8 16:29:56 linux3 kernel: [ 0.952816] Switched to NOHz mode on CPU #1 Apr 8 16:29:56 linux3 kernel: [ 0.952828] Switched to NOHz mode on CPU #4 Apr 8 16:29:56 linux3 kernel: [ 0.952862] Switched to NOHz mode on CPU #7 Apr 8 16:29:56 linux3 kernel: [ 0.987383] pci 0000:00:1c.0: PCI bridge to [bus 01-01] Apr 8 16:29:56 linux3 kernel: [ 0.987384] pci 0000:00:1c.0: bridge window [io disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987395] pci 0000:00:1c.0: bridge window [mem disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987403] pci 0000:00:1c.0: bridge window [mem pref disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987415] pci 0000:00:1c.4: PCI bridge to [bus 02-02] Apr 8 16:29:56 linux3 kernel: [ 0.987416] pci 0000:00:1c.4: bridge window [io disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987426] pci 0000:00:1c.4: bridge window [mem disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987434] pci 0000:00:1c.4: bridge window [mem pref disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987446] pci 0000:00:1c.6: PCI bridge to [bus 03-03] Apr 8 16:29:56 linux3 kernel: [ 0.987447] pci 0000:00:1c.6: bridge window [io disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987456] pci 0000:00:1c.6: bridge window [mem disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987464] pci 0000:00:1c.6: bridge window [mem pref disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987476] pci 0000:00:1c.7: PCI bridge to [bus 04-04] Apr 8 16:29:56 linux3 kernel: [ 0.987477] pci 0000:00:1c.7: bridge window [io disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987486] pci 0000:00:1c.7: bridge window [mem disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987494] pci 0000:00:1c.7: bridge window [mem pref disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987506] pci 0000:00:1e.0: PCI bridge to [bus 05-05] Apr 8 16:29:56 linux3 kernel: [ 0.987511] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] Apr 8 16:29:56 linux3 kernel: [ 0.987516] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff] Apr 8 16:29:56 linux3 kernel: [ 0.987521] pci 0000:00:1e.0: bridge window [mem pref disabled] Apr 8 16:29:56 linux3 kernel: [ 0.987538] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Apr 8 16:29:56 linux3 kernel: [ 0.987559] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Apr 8 16:29:56 linux3 kernel: [ 0.987576] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Apr 8 16:29:56 linux3 kernel: [ 0.987593] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Apr 8 16:29:56 linux3 kernel: [ 0.987696] NET: Registered protocol family 2 Apr 8 16:29:56 linux3 kernel: [ 0.987759] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.987913] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.988057] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.988125] TCP: Hash tables configured (established 131072 bind 65536) Apr 8 16:29:56 linux3 kernel: [ 0.988127] TCP reno registered Apr 8 16:29:56 linux3 kernel: [ 0.988128] UDP hash table entries: 512 (order: 2, 16384 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.988131] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Apr 8 16:29:56 linux3 kernel: [ 0.988253] NET: Registered protocol family 1 Apr 8 16:29:56 linux3 kernel: [ 1.341067] Unpacking initramfs... Apr 8 16:29:56 linux3 kernel: [ 1.498319] Freeing initrd memory: 8924k freed Apr 8 16:29:56 linux3 kernel: [ 1.499061] DMAR: Host address width 36 Apr 8 16:29:56 linux3 kernel: [ 1.499063] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 Apr 8 16:29:56 linux3 kernel: [ 1.499074] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a Apr 8 16:29:56 linux3 kernel: [ 1.499076] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 Apr 8 16:29:56 linux3 kernel: [ 1.499080] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a Apr 8 16:29:56 linux3 kernel: [ 1.499081] DMAR: RMRR base: 0x000000cac50000 end: 0x000000cac5efff Apr 8 16:29:56 linux3 kernel: [ 1.499083] DMAR: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff Apr 8 16:29:56 linux3 kernel: [ 1.499083] DMAR: No ATSR found Apr 8 16:29:56 linux3 kernel: [ 1.499539] audit: initializing netlink socket (disabled) Apr 8 16:29:56 linux3 kernel: [ 1.499546] type=2000 audit(1365427787.280:1): initialized Apr 8 16:29:56 linux3 kernel: [ 1.510092] highmem bounce pool size: 64 pages Apr 8 16:29:56 linux3 kernel: [ 1.510095] HugeTLB registered 2 MB page size, pre-allocated 0 pages Apr 8 16:29:56 linux3 kernel: [ 1.511555] VFS: Disk quotas dquot_6.5.2 Apr 8 16:29:56 linux3 kernel: [ 1.511607] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Apr 8 16:29:56 linux3 kernel: [ 1.511673] msgmni has been set to 1494 Apr 8 16:29:56 linux3 kernel: [ 1.511813] alg: No test for stdrng (krng) Apr 8 16:29:56 linux3 kernel: [ 1.511840] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Apr 8 16:29:56 linux3 kernel: [ 1.511842] io scheduler noop registered Apr 8 16:29:56 linux3 kernel: [ 1.511843] io scheduler deadline registered Apr 8 16:29:56 linux3 kernel: [ 1.511869] io scheduler cfq registered (default) Apr 8 16:29:56 linux3 kernel: [ 1.512829] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt Apr 8 16:29:56 linux3 kernel: [ 1.512865] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt Apr 8 16:29:56 linux3 kernel: [ 1.512900] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt Apr 8 16:29:56 linux3 kernel: [ 1.512932] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt Apr 8 16:29:56 linux3 kernel: [ 1.512992] ERST: Table is not found! Apr 8 16:29:56 linux3 kernel: [ 1.512998] isapnp: Scanning for PnP cards... Apr 8 16:29:56 linux3 kernel: [ 1.870533] isapnp: No Plug & Play device found Apr 8 16:29:56 linux3 kernel: [ 1.870560] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Apr 8 16:29:56 linux3 kernel: [ 1.891555] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Apr 8 16:29:56 linux3 kernel: [ 1.912847] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Apr 8 16:29:56 linux3 kernel: [ 1.912944] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Apr 8 16:29:56 linux3 kernel: [ 1.933338] 0000:00:16.3: ttyS1 at I/O 0xf140 (irq = 17) is a 16550A Apr 8 16:29:56 linux3 kernel: [ 1.933492] Linux agpgart interface v0.103 Apr 8 16:29:56 linux3 kernel: [ 1.933550] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset Apr 8 16:29:56 linux3 kernel: [ 1.933595] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable Apr 8 16:29:56 linux3 kernel: [ 1.934757] agpgart-intel 0000:00:00.0: detected 65536K stolen memory Apr 8 16:29:56 linux3 kernel: [ 1.934845] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Apr 8 16:29:56 linux3 kernel: [ 1.934969] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 Apr 8 16:29:56 linux3 kernel: [ 1.938077] serio: i8042 KBD port at 0x60,0x64 irq 1 Apr 8 16:29:56 linux3 kernel: [ 1.938081] serio: i8042 AUX port at 0x60,0x64 irq 12 Apr 8 16:29:56 linux3 kernel: [ 1.938137] mousedev: PS/2 mouse device common for all mice Apr 8 16:29:56 linux3 kernel: [ 1.938179] rtc_cmos 00:06: RTC can wake from S4 Apr 8 16:29:56 linux3 kernel: [ 1.938359] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 Apr 8 16:29:56 linux3 kernel: [ 1.938416] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Apr 8 16:29:56 linux3 kernel: [ 1.938421] cpuidle: using governor ladder Apr 8 16:29:56 linux3 kernel: [ 1.938422] cpuidle: using governor menu Apr 8 16:29:56 linux3 kernel: [ 1.938551] TCP cubic registered Apr 8 16:29:56 linux3 kernel: [ 1.938624] NET: Registered protocol family 10 Apr 8 16:29:56 linux3 kernel: [ 1.938968] Mobile IPv6 Apr 8 16:29:56 linux3 kernel: [ 1.938969] NET: Registered protocol family 17 Apr 8 16:29:56 linux3 kernel: [ 1.938971] Registering the dns_resolver key type Apr 8 16:29:56 linux3 kernel: [ 1.938983] Using IPI No-Shortcut mode Apr 8 16:29:56 linux3 kernel: [ 1.939028] registered taskstats version 1 Apr 8 16:29:56 linux3 kernel: [ 1.940087] rtc_cmos 00:06: setting system clock to 2013-04-08 13:29:48 UTC (1365427788) Apr 8 16:29:56 linux3 kernel: [ 1.940122] Initializing network drop monitor service Apr 8 16:29:56 linux3 kernel: [ 1.940197] Freeing unused kernel memory: 440k freed Apr 8 16:29:56 linux3 kernel: [ 1.940273] Write protecting the kernel text: 2788k Apr 8 16:29:56 linux3 kernel: [ 1.940295] Write protecting the kernel read-only data: 1036k Apr 8 16:29:56 linux3 kernel: [ 1.940296] NX-protecting the kernel data: 3356k Apr 8 16:29:56 linux3 kernel: [ 1.947332] udev[72]: starting version 164 Apr 8 16:29:56 linux3 kernel: [ 1.956953] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Apr 8 16:29:56 linux3 kernel: [ 1.973277] usbcore: registered new interface driver usbfs Apr 8 16:29:56 linux3 kernel: [ 1.973295] usbcore: registered new interface driver hub Apr 8 16:29:56 linux3 kernel: [ 1.973329] usbcore: registered new device driver usb Apr 8 16:29:56 linux3 kernel: [ 1.975822] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Apr 8 16:29:56 linux3 kernel: [ 1.975846] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Apr 8 16:29:56 linux3 kernel: [ 1.975867] ehci_hcd 0000:00:1a.0: EHCI Host Controller Apr 8 16:29:56 linux3 kernel: [ 1.975888] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 Apr 8 16:29:56 linux3 kernel: [ 1.982176] SCSI subsystem initialized Apr 8 16:29:56 linux3 kernel: [ 1.995639] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 Apr 8 16:29:56 linux3 kernel: [ 1.995641] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. Apr 8 16:29:56 linux3 kernel: [ 1.996614] 3c59x 0000:05:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Apr 8 16:29:56 linux3 kernel: [ 1.996630] 3c59x: Donald Becker and others. Apr 8 16:29:56 linux3 kernel: [ 1.996648] 0000:05:01.0: 3Com PCI 3c905C Tornado at f8242000. Apr 8 16:29:56 linux3 kernel: [ 2.023158] ehci_hcd 0000:00:1a.0: debug port 2 Apr 8 16:29:56 linux3 kernel: [ 2.027069] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe526000 Apr 8 16:29:56 linux3 kernel: [ 2.039023] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 Apr 8 16:29:56 linux3 kernel: [ 2.039042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Apr 8 16:29:56 linux3 kernel: [ 2.039045] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Apr 8 16:29:56 linux3 kernel: [ 2.039047] usb usb1: Product: EHCI Host Controller Apr 8 16:29:56 linux3 kernel: [ 2.039058] usb usb1: Manufacturer: Linux 2.6.39-bpo.2-686-pae ehci_hcd Apr 8 16:29:56 linux3 kernel: [ 2.039059] usb usb1: SerialNumber: 0000:00:1a.0 Apr 8 16:29:56 linux3 kernel: [ 2.039115] hub 1-0:1.0: USB hub found Apr 8 16:29:56 linux3 kernel: [ 2.039117] hub 1-0:1.0: 3 ports detected Apr 8 16:29:56 linux3 kernel: [ 2.039163] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Apr 8 16:29:56 linux3 kernel: [ 2.039178] ehci_hcd 0000:00:1d.0: EHCI Host Controller Apr 8 16:29:56 linux3 kernel: [ 2.039182] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Apr 8 16:29:56 linux3 kernel: [ 2.066977] ehci_hcd 0000:00:1d.0: debug port 2 Apr 8 16:29:56 linux3 kernel: [ 2.070863] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe525000 Apr 8 16:29:56 linux3 kernel: [ 2.082880] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 Apr 8 16:29:56 linux3 kernel: [ 2.082895] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 Apr 8 16:29:56 linux3 kernel: [ 2.082898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Apr 8 16:29:56 linux3 kernel: [ 2.082901] usb usb2: Product: EHCI Host Controller Apr 8 16:29:56 linux3 kernel: [ 2.082903] usb usb2: Manufacturer: Linux 2.6.39-bpo.2-686-pae ehci_hcd Apr 8 16:29:56 linux3 kernel: [ 2.082905] usb usb2: SerialNumber: 0000:00:1d.0 Apr 8 16:29:56 linux3 kernel: [ 2.082971] hub 2-0:1.0: USB hub found Apr 8 16:29:56 linux3 kernel: [ 2.082972] hub 2-0:1.0: 3 ports detected Apr 8 16:29:56 linux3 kernel: [ 2.083042] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Apr 8 16:29:56 linux3 kernel: [ 2.291910] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GB/s:Width x1) 2c:27:d7:46:1a:a4 Apr 8 16:29:56 linux3 kernel: [ 2.291912] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection Apr 8 16:29:56 linux3 kernel: [ 2.291960] e1000e 0000:00:19.0: eth1: MAC: 10, PHY: 11, PBA No: 0100FF-0FF Apr 8 16:29:56 linux3 kernel: [ 2.291994] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Apr 8 16:29:56 linux3 kernel: [ 2.292003] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] Apr 8 16:29:56 linux3 kernel: [ 2.350116] usb 1-1: new high speed USB device number 2 using ehci_hcd Apr 8 16:29:56 linux3 kernel: [ 2.446078] scsi0 : ata_piix Apr 8 16:29:56 linux3 kernel: [ 2.446150] scsi1 : ata_piix Apr 8 16:29:56 linux3 kernel: [ 2.447044] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14 Apr 8 16:29:56 linux3 kernel: [ 2.447052] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15 Apr 8 16:29:56 linux3 kernel: [ 2.447065] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Apr 8 16:29:56 linux3 kernel: [ 2.447074] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] Apr 8 16:29:56 linux3 kernel: [ 2.482085] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 Apr 8 16:29:56 linux3 kernel: [ 2.482089] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Apr 8 16:29:56 linux3 kernel: [ 2.482229] hub 1-1:1.0: USB hub found Apr 8 16:29:56 linux3 kernel: [ 2.482322] hub 1-1:1.0: 6 ports detected Apr 8 16:29:56 linux3 kernel: [ 2.493710] Refined TSC clocksource calibration: 3392.295 MHz. Apr 8 16:29:56 linux3 kernel: [ 2.493716] Switching to clocksource tsc Apr 8 16:29:56 linux3 kernel: [ 2.593422] usb 2-1: new high speed USB device number 2 using ehci_hcd Apr 8 16:29:56 linux3 kernel: [ 2.601394] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work Apr 8 16:29:56 linux3 kernel: [ 2.601545] scsi2 : ata_piix Apr 8 16:29:56 linux3 kernel: [ 2.601575] scsi3 : ata_piix Apr 8 16:29:56 linux3 kernel: [ 2.602185] ata3: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19 Apr 8 16:29:56 linux3 kernel: [ 2.602186] ata4: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19 Apr 8 16:29:56 linux3 kernel: [ 2.725378] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 Apr 8 16:29:56 linux3 kernel: [ 2.725382] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Apr 8 16:29:56 linux3 kernel: [ 2.725530] hub 2-1:1.0: USB hub found Apr 8 16:29:56 linux3 kernel: [ 2.725624] hub 2-1:1.0: 8 ports detected Apr 8 16:29:56 linux3 kernel: [ 3.239649] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 8 16:29:56 linux3 kernel: [ 3.239669] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 8 16:29:56 linux3 kernel: [ 3.256509] ata1.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133 Apr 8 16:29:56 linux3 kernel: [ 3.256512] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) Apr 8 16:29:56 linux3 kernel: [ 3.256519] ata1.01: ATAPI: hp DVD D DH16D5S, VHD7, max UDMA/100 Apr 8 16:29:56 linux3 kernel: [ 3.264450] ata1.00: configured for UDMA/133 Apr 8 16:29:56 linux3 kernel: [ 3.279589] ata1.01: configured for UDMA/100 Apr 8 16:29:56 linux3 kernel: [ 3.280366] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5 Apr 8 16:29:56 linux3 kernel: [ 3.282073] scsi 0:0:1:0: CD-ROM hp DVD D DH16D5S VHD7 PQ: 0 ANSI: 5 Apr 8 16:29:56 linux3 kernel: [ 3.953614] ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) Apr 8 16:29:56 linux3 kernel: [ 3.953629] ata2.01: SATA link down (SStatus 4 SControl 0) Apr 8 16:29:56 linux3 kernel: [ 3.962455] ata2.00: ATA-8: WDC WD5000AAKX-221CA1, 17.01H17, max UDMA/133 Apr 8 16:29:56 linux3 kernel: [ 3.962459] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) Apr 8 16:29:56 linux3 kernel: [ 3.970440] ata2.00: configured for UDMA/133 Apr 8 16:29:56 linux3 kernel: [ 3.970520] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKX-2 17.0 PQ: 0 ANSI: 5 Apr 8 16:29:56 linux3 kernel: [ 3.977316] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray Apr 8 16:29:56 linux3 kernel: [ 3.977321] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) Apr 8 16:29:56 linux3 kernel: [ 3.977325] cdrom: Uniform CD-ROM driver Revision: 3.20 Apr 8 16:29:56 linux3 kernel: [ 3.977381] sd 0:0:0:0: [sda] Write Protect is off Apr 8 16:29:56 linux3 kernel: [ 3.977395] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 8 16:29:56 linux3 kernel: [ 3.977559] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) Apr 8 16:29:56 linux3 kernel: [ 3.977587] sd 1:0:0:0: [sdb] Write Protect is off Apr 8 16:29:56 linux3 kernel: [ 3.977600] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Apr 8 16:29:56 linux3 kernel: [ 4.000192] sdb: sdb1 Apr 8 16:29:56 linux3 kernel: [ 4.000345] sd 1:0:0:0: [sdb] Attached SCSI disk Apr 8 16:29:56 linux3 kernel: [ 4.029107] sda: sda1 sda2 < sda5 > Apr 8 16:29:56 linux3 kernel: [ 4.029316] sd 0:0:0:0: [sda] Attached SCSI disk Apr 8 16:29:56 linux3 kernel: [ 4.031494] sd 0:0:0:0: Attached scsi generic sg0 type 0 Apr 8 16:29:56 linux3 kernel: [ 4.031515] sr 0:0:1:0: Attached scsi generic sg1 type 5 Apr 8 16:29:56 linux3 kernel: [ 4.031534] sd 1:0:0:0: Attached scsi generic sg2 type 0 Apr 8 16:29:56 linux3 kernel: [ 4.288596] PM: Starting manual resume from disk Apr 8 16:29:56 linux3 kernel: [ 4.329545] EXT3-fs: barriers not enabled Apr 8 16:29:56 linux3 kernel: [ 4.345415] kjournald starting. Commit interval 5 seconds Apr 8 16:29:56 linux3 kernel: [ 4.345503] EXT3-fs (sda1): mounted filesystem with ordered data mode Apr 8 16:29:56 linux3 kernel: [ 5.481274] udev[300]: starting version 164 Apr 8 16:29:56 linux3 kernel: [ 5.701663] wmi: Mapper loaded Apr 8 16:29:56 linux3 kernel: [ 5.866020] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Apr 8 16:29:56 linux3 kernel: [ 5.866041] ACPI: Power Button [PWRB] Apr 8 16:29:56 linux3 kernel: [ 5.866068] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 Apr 8 16:29:56 linux3 kernel: [ 5.866083] ACPI: Power Button [PWRF] Apr 8 16:29:56 linux3 kernel: [ 5.893376] input: PC Speaker as /devices/platform/pcspkr/input/input3 Apr 8 16:29:56 linux3 kernel: [ 6.069202] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Apr 8 16:29:56 linux3 kernel: [ 6.267015] input: HP WMI hotkeys as /devices/virtual/input/input4 Apr 8 16:29:56 linux3 kernel: [ 6.320314] [drm] Initialized drm 1.1.0 20060810 Apr 8 16:29:56 linux3 kernel: [ 6.454727] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Apr 8 16:29:56 linux3 kernel: [ 6.468743] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Apr 8 16:29:56 linux3 kernel: [ 6.468744] [drm] Driver supports precise vblank timestamp query. Apr 8 16:29:56 linux3 kernel: [ 6.494544] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem Apr 8 16:29:56 linux3 kernel: [ 6.637622] fbcon: inteldrmfb (fb0) is primary device Apr 8 16:29:56 linux3 kernel: [ 6.811892] Console: switching to colour frame buffer device 240x67 Apr 8 16:29:56 linux3 kernel: [ 6.815489] fb0: inteldrmfb frame buffer device Apr 8 16:29:56 linux3 kernel: [ 6.815490] drm: registered panic notifier Apr 8 16:29:56 linux3 kernel: [ 6.815496] No ACPI video bus found Apr 8 16:29:56 linux3 kernel: [ 6.815573] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Apr 8 16:29:56 linux3 kernel: [ 6.815599] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Apr 8 16:29:56 linux3 kernel: [ 7.090461] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5 Apr 8 16:29:56 linux3 kernel: [ 7.378367] hda_codec: ALC662 rev1: BIOS auto-probing. Apr 8 16:29:56 linux3 kernel: [ 7.386840] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 Apr 8 16:29:56 linux3 kernel: [ 7.744696] Adding 6420476k swap on /dev/sda5. Priority:-1 extents:1 across:6420476k Apr 8 16:29:56 linux3 kernel: [ 7.907971] EXT3-fs (sda1): using internal journal Apr 8 16:29:56 linux3 kernel: [ 8.052328] loop: module loaded Apr 8 16:29:56 linux3 kernel: [ 8.745480] eth0: setting full-duplex. Apr 8 16:29:57 linux3 kernel: [ 10.545017] sshd (1223): /proc/1223/oom_adj is deprecated, please use /proc/1223/oom_score_adj instead. Apr 8 16:54:49 linux3 kernel: [ 1499.054160] Bluetooth: Core ver 2.16 Apr 8 16:54:49 linux3 kernel: [ 1499.054171] NET: Registered protocol family 31 Apr 8 16:54:49 linux3 kernel: [ 1499.054172] Bluetooth: HCI device and connection manager initialized Apr 8 16:54:49 linux3 kernel: [ 1499.054174] Bluetooth: HCI socket layer initialized Apr 8 16:54:49 linux3 kernel: [ 1499.054175] Bluetooth: L2CAP socket layer initialized Apr 8 16:54:49 linux3 kernel: [ 1499.054220] Bluetooth: SCO socket layer initialized Apr 8 16:54:49 linux3 kernel: [ 1499.066112] Bluetooth: RFCOMM TTY layer initialized Apr 8 16:54:49 linux3 kernel: [ 1499.066114] Bluetooth: RFCOMM socket layer initialized Apr 8 16:54:49 linux3 kernel: [ 1499.066115] Bluetooth: RFCOMM ver 1.11 Apr 8 16:54:49 linux3 kernel: [ 1499.069866] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Apr 8 16:54:49 linux3 kernel: [ 1499.069868] Bluetooth: BNEP filters: protocol multicast Apr 8 16:54:49 linux3 kernel: [ 1499.081887] Bridge firewalling registered Apr 8 16:55:00 linux3 kernel: [ 1509.790850] fuse init (API version 7.16) Apr 8 16:55:08 linux3 kernel: [ 1517.666224] ADDRCONF(NETDEV_UP): eth1: link is not ready Apr 8 16:55:34 linux3 kernel: [ 1544.001800] device-mapper: uevent: version 1.0.3 Apr 8 16:55:34 linux3 kernel: [ 1544.001893] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com Apr 8 16:55:41 linux3 kernel: [ 1550.596059] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Apr 8 16:55:41 linux3 kernel: [ 1550.596876] SGI XFS Quota Management subsystem Apr 8 16:55:41 linux3 kernel: [ 1550.659499] JFS: nTxBlock = 8192, nTxLock = 65536 Apr 8 16:55:41 linux3 kernel: [ 1550.696263] NTFS driver 2.1.30 [Flags: R/W MODULE]. Apr 8 16:55:41 linux3 kernel: [ 1550.719767] QNX4 filesystem 0.2.3 registered. Apr 8 16:55:41 linux3 kernel: [ 1550.775170] Btrfs loaded Apr 8 16:55:41 linux3 os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sda2 Apr 8 16:55:41 linux3 50mounted-tests: debug: /dev/sda2 type not recognised; skipping Apr 8 16:55:41 linux3 os-prober: debug: os detected by /usr/lib/os-probes/50mounted-tests Apr 8 16:55:41 linux3 os-prober: debug: /dev/sda5: is active swap Apr 8 16:55:41 linux3 os-prober: debug: running /usr/lib/os-probes/50mounted-tests on /dev/sdb1 Apr 8 16:55:42 linux3 50mounted-tests: debug: mounted as ntfs-3g filesystem Apr 8 16:55:42 linux3 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10freedos Apr 8 16:55:42 linux3 10freedos: debug: /dev/sdb1 is not a FAT partition: exiting Apr 8 16:55:42 linux3 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/10qnx Apr 8 16:55:42 linux3 10qnx: debug: /dev/sdb1 is not a QNX4 partition: exiting Apr 8 16:55:42 linux3 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20macosx Apr 8 16:55:42 linux3 macosx-prober: debug: /dev/sdb1 is not an HFS+ partition: exiting Apr 8 16:55:42 linux3 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/20microsoft Apr 8 16:55:42 linux3 20microsoft: debug: /dev/sdb1 is a NTFS partition Apr 8 16:55:42 linux3 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/30utility Apr 8 16:55:42 linux3 30utility: debug: /dev/sdb1 is not a FAT partition: exiting Apr 8 16:55:42 linux3 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/40lsb Apr 8 16:55:42 linux3 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/70hurd Apr 8 16:55:42 linux3 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/80minix Apr 8 16:55:42 linux3 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90linux-distro Apr 8 16:55:42 linux3 50mounted-tests: debug: running subtest /usr/lib/os-probes/mounted/90solaris Apr 8 15:17:06 linux3 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1 Apr 8 15:17:06 linux3 dhcpd: Copyright 2004-2010 Internet Systems Consortium. Apr 8 15:17:06 linux3 dhcpd: All rights reserved. Apr 8 15:17:06 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:17:06 linux3 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1 Apr 8 15:17:06 linux3 dhcpd: Copyright 2004-2010 Internet Systems Consortium. Apr 8 15:17:06 linux3 dhcpd: All rights reserved. Apr 8 15:17:06 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:17:06 linux3 dhcpd: Wrote 0 leases to leases file. Apr 8 15:17:06 linux3 dhcpd: Apr 8 15:27:15 linux3 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1 Apr 8 15:27:15 linux3 dhcpd: Copyright 2004-2010 Internet Systems Consortium. Apr 8 15:27:15 linux3 dhcpd: All rights reserved. Apr 8 15:27:15 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:27:17 linux3 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1 Apr 8 15:27:17 linux3 dhcpd: Copyright 2004-2010 Internet Systems Consortium. Apr 8 15:27:17 linux3 dhcpd: All rights reserved. Apr 8 15:27:17 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:27:17 linux3 dhcpd: Internet Systems Consortium DHCP Server 4.1.1-P1 Apr 8 15:27:17 linux3 dhcpd: Copyright 2004-2010 Internet Systems Consortium. Apr 8 15:27:17 linux3 dhcpd: All rights reserved. Apr 8 15:27:17 linux3 dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Apr 8 15:27:17 linux3 dhcpd: Wrote 0 leases to leases file. Apr 8 15:30:24 linux3 dhcpd: DHCPREQUEST for 10.0.10.26 from 30:85:a9:0f:5d:47 via eth0: ignored (not authoritative). Apr 8 15:30:26 linux3 dhcpd: DHCPREQUEST for 10.0.10.26 from 30:85:a9:0f:5d:47 via eth0: ignored (not authoritative). Apr 8 15:30:32 linux3 dhcpd: DHCPREQUEST for 10.0.10.26 from 30:85:a9:0f:5d:47 via eth0: ignored (not authoritative). Apr 8 15:30:41 linux3 dhcpd: DHCPDISCOVER from 30:85:a9:0f:5d:47 via eth0 Apr 8 15:30:42 linux3 dhcpd: DHCPOFFER on 192.168.30.100 to 30:85:a9:0f:5d:47 (it-notebook) via eth0 Apr 8 15:30:42 linux3 dhcpd: DHCPREQUEST for 192.168.30.100 (192.168.30.1) from 30:85:a9:0f:5d:47 (it-notebook) via eth0 Apr 8 15:30:42 linux3 dhcpd: DHCPACK on 192.168.30.100 to 30:85:a9:0f:5d:47 (it-notebook) via eth0
Время первой команды журнала | 13:54:09 2013- 4- 8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Время последней команды журнала | 16:07:41 2013- 4- 8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Количество командных строк в журнале | 101 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Процент команд с ненулевым кодом завершения, % | 11.88 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Процент синтаксически неверно набранных команд, % | 1.98 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Суммарное время работы с терминалом *, час | 1.68 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Количество командных строк в единицу времени, команда/мин | 1.00 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Частота использования команд |
|
В журнал автоматически попадают все команды, данные в любом терминале системы.
Для того чтобы убедиться, что журнал на текущем терминале ведётся, и команды записываются, дайте команду w. В поле WHAT, соответствующем текущему терминалу, должна быть указана программа script.
Команды, при наборе которых были допущены синтаксические ошибки, выводятся перечёркнутым текстом:
$ l s-l bash: l: command not found |
Если код завершения команды равен нулю, команда была выполнена без ошибок. Команды, код завершения которых отличен от нуля, выделяются цветом.
$ test 5 -lt 4 |
Команды, ход выполнения которых был прерван пользователем, выделяются цветом.
$ find / -name abc find: /home/devi-orig/.gnome2: Keine Berechtigung find: /home/devi-orig/.gnome2_private: Keine Berechtigung find: /home/devi-orig/.nautilus/metafiles: Keine Berechtigung find: /home/devi-orig/.metacity: Keine Berechtigung find: /home/devi-orig/.inkscape: Keine Berechtigung ^C |
Команды, выполненные с привилегиями суперпользователя, выделяются слева красной чертой.
# id uid=0(root) gid=0(root) Gruppen=0(root) |
Изменения, внесённые в текстовый файл с помощью редактора, запоминаются и показываются в журнале в формате ed. Строки, начинающиеся символом "<", удалены, а строки, начинающиеся символом ">" -- добавлены.
$ vi ~/.bashrc
|
Для того чтобы изменить файл в соответствии с показанными в диффшоте изменениями, можно воспользоваться командой patch. Нужно скопировать изменения, запустить программу patch, указав в качестве её аргумента файл, к которому применяются изменения, и всавить скопированный текст:
$ patch ~/.bashrc |
Для того чтобы получить краткую справочную информацию о команде, нужно подвести к ней мышь. Во всплывающей подсказке появится краткое описание команды.
Если справочная информация о команде есть, команда выделяется голубым фоном, например: vi. Если справочная информация отсутствует, команда выделяется розовым фоном, например: notepad.exe. Справочная информация может отсутствовать в том случае, если (1) команда введена неверно; (2) если распознавание команды LiLaLo выполнено неверно; (3) если информация о команде неизвестна LiLaLo. Последнее возможно для редких команд.
Большие, в особенности многострочные, всплывающие подсказки лучше всего показываются браузерами KDE Konqueror, Apple Safari и Microsoft Internet Explorer. В браузерах Mozilla и Firefox они отображаются не полностью, а вместо перевода строки выводится специальный символ.
Время ввода команды, показанное в журнале, соответствует времени начала ввода командной строки, которое равно тому моменту, когда на терминале появилось приглашение интерпретатора
Имя терминала, на котором была введена команда, показано в специальном блоке. Этот блок показывается только в том случае, если терминал текущей команды отличается от терминала предыдущей.
Вывод не интересующих вас в настоящий момент элементов журнала, таких как время, имя терминала и других, можно отключить. Для этого нужно воспользоваться формой управления журналом вверху страницы.
Небольшие комментарии к командам можно вставлять прямо из командной строки. Комментарий вводится прямо в командную строку, после символов #^ или #v. Символы ^ и v показывают направление выбора команды, к которой относится комментарий: ^ - к предыдущей, v - к следующей. Например, если в командной строке было введено:
$ whoami
user
$ #^ Интересно, кто я?в журнале это будет выглядеть так:
$ whoami
user
Интересно, кто я? |
Если комментарий содержит несколько строк, его можно вставить в журнал следующим образом:
$ whoami
user
$ cat > /dev/null #^ Интересно, кто я?
Программа whoami выводит имя пользователя, под которым мы зарегистрировались в системе. - Она не может ответить на вопрос о нашем назначении в этом мире.В журнале это будет выглядеть так:
$ whoami user
|
Комментарии, не относящиеся непосредственно ни к какой из команд, добавляются точно таким же способом, только вместо симолов #^ или #v нужно использовать символы #=
1 2 3 4Группы команд, выполненных на разных терминалах, разделяются специальной линией. Под этой линией в правом углу показано имя терминала, на котором выполнялись команды. Для того чтобы посмотреть команды только одного сенса, нужно щёкнуть по этому названию.
LiLaLo (L3) расшифровывается как Live Lab Log.
Программа разработана для повышения эффективности обучения Unix/Linux-системам.
(c) Игорь Чубин, 2004-2008