[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-bpo.2-686-pae (Debian 2.6.39-3~bpo60+1) (norbert@tretkowski.de) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Thu Aug 4 11:02:22 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000defafe00 (usable)
[ 0.000000] BIOS-e820: 00000000defafe00 - 00000000defb1ea0 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000defb1ea0 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000021c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq dc7800p Convertible Minitower/0AACh, BIOS 786F1 v01.04 07/18/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x21c000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E3FFF write-protect
[ 0.000000] E4000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 0DF000000 mask FFF000000 uncachable
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 21C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 200000000 mask FE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000df000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [c00f9bf0] f9bf0
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 376dd000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 36dca000 - 376dc6df
[ 0.000000] Move RAMDISK from 00000000376dd000 - 0000000037fef6de to 36dca000 - 376dc6de
[ 0.000000] ACPI: RSDP 000e5c10 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT defc1e40 00044 (v01 HPQOEM SLIC-BPC 20070718 00000000)
[ 0.000000] ACPI: FACP defc1ee8 00074 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: DSDT defc2427 0A214 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
[ 0.000000] ACPI: FACS defc1e00 00040
[ 0.000000] ACPI: APIC defc1f5c 00084 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: ASF! defc1fe0 00063 (v32 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: MCFG defc2043 0003C (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: TCPA defc207f 00032 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: SLIC defc20b1 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
[ 0.000000] ACPI: HPET defc2227 00038 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: DMAR defc225f 00198 (v01 COMPAQ BEARLAKE 00000001 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7750MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0021c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000defaf
[ 0.000000] 0: 0x00100000 -> 0x0021c000
[ 0.000000] On node 0 totalpages: 2076478
[ 0.000000] free_area_init_node: node 0, pgdat c14187c0, node_mem_map f2a4a200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 15501 pages used for memmap
[ 0.000000] HighMem zone: 1833252 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:14000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f2800000 s30976 r0 d22272 u524288
[ 0.000000] pcpu-alloc: s30976 r0 d22272 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2059197
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-bpo.2-686-pae root=UUID=d4561549-44f3-49c5-9cee-46630194cd14 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0021c000)
[ 0.000000] Memory: 8221112k/8847360k available (2786k kernel code, 84800k reserved, 1434k data, 440k init, 7395012k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1420000 - 0xc148e000 ( 440 kB)
[ 0.000000] .data : 0xc12b8810 - 0xc141f240 (1434 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12b8810 (2786 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f240a000 soft=f240c000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2327.210 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4654.42 BogoMIPS (lpj=9308840)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004045] Security Framework initialized
[ 0.004049] SELinux: Disabled at boot.
[ 0.004069] Mount-cache hash table entries: 512
[ 0.004346] Initializing cgroup subsys ns
[ 0.004349] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004352] Initializing cgroup subsys cpuacct
[ 0.004384] Initializing cgroup subsys memory
[ 0.004397] Initializing cgroup subsys devices
[ 0.004399] Initializing cgroup subsys freezer
[ 0.004401] Initializing cgroup subsys net_cls
[ 0.004403] Initializing cgroup subsys blkio
[ 0.004431] CPU: Physical Processor ID: 0
[ 0.004432] CPU: Processor Core ID: 0
[ 0.004435] mce: CPU supports 6 MCE banks
[ 0.004442] CPU0: Thermal monitoring enabled (TM2)
[ 0.004445] using mwait in idle threads.
[ 0.005609] ACPI: Core revision 20110316
[ 0.012047] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012339] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052731] CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b
[ 0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.056003] PEBS disabled due to CPU errata.
[ 0.056003] ... version: 2
[ 0.056003] ... bit width: 40
[ 0.056003] ... generic registers: 2
[ 0.056003] ... value mask: 000000ffffffffff
[ 0.056003] ... max period: 000000007fffffff
[ 0.056003] ... fixed-purpose events: 3
[ 0.056003] ... event mask: 0000000700000003
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] CPU 1 irqstacks, hard=f24d6000 soft=f24d8000
[ 0.056003] Booting Node 0, Processors #1
[ 0.056003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.144031] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144060] Brought up 2 CPUs
[ 0.144062] Total of 2 processors activated (9309.42 BogoMIPS).
[ 0.145182] devtmpfs: initialized
[ 0.145182] PM: Registering ACPI NVS region at defafe00 (8352 bytes)
[ 0.145182] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.145182] print_constraints: dummy:
[ 0.145182] NET: Registered protocol family 16
[ 0.145182] ACPI: bus type pci registered
[ 0.145182] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.145182] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.145182] PCI: Using MMCONFIG for extended config space
[ 0.145182] PCI: Using configuration type 1 for base access
[ 0.145182] bio: create slab <bio-0> at 0
[ 0.149945] ACPI: EC: Look up EC in DSDT
[ 0.196061] ACPI: SSDT defcd42b 003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.196323] ACPI: Dynamic OEM Table Load:
[ 0.196326] ACPI: SSDT (null) 003AC (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
[ 0.220039] ACPI: SSDT defcd2af 0017C (v01 COMPAQ CST 00000001 MSFT 0100000E)
[ 0.220267] ACPI: Dynamic OEM Table Load:
[ 0.220269] ACPI: SSDT (null) 0017C (v01 COMPAQ CST 00000001 MSFT 0100000E)
[ 0.268180] ACPI: Interpreter enabled
[ 0.268187] ACPI: (supports S0 S3 S4 S5)
[ 0.268203] ACPI: Using IOAPIC for interrupt routing
[ 0.284122] ACPI: No dock devices found.
[ 0.284125] HEST: Table not found.
[ 0.284129] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.296197] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.296203] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f24406c8), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.296210] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.296215] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110316/nspredef-352)
[ 0.296221] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.296477] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfebfffff] (ignored)
[ 0.296481] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.296484] pci_root PNP0A08:00: host bridge window [io 0x1000-0x2fff] (ignored)
[ 0.296486] pci_root PNP0A08:00: host bridge window [io 0x3000-0x6fff] (ignored)
[ 0.296489] pci_root PNP0A08:00: host bridge window [io 0x7000-0xafff] (ignored)
[ 0.296491] pci_root PNP0A08:00: host bridge window [io 0xb000-0xffff] (ignored)
[ 0.296494] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.296497] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf3ffffff] (ignored)
[ 0.296506] pci 0000:00:00.0: [8086:29b0] type 0 class 0x000600
[ 0.296540] pci 0000:00:02.0: [8086:29b2] type 0 class 0x000300
[ 0.296550] pci 0000:00:02.0: reg 10: [mem 0xf0100000-0xf017ffff]
[ 0.296555] pci 0000:00:02.0: reg 14: [io 0x2230-0x2237]
[ 0.296560] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref]
[ 0.296566] pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
[ 0.296595] pci 0000:00:03.0: [8086:29b4] type 0 class 0x000780
[ 0.296608] pci 0000:00:03.0: reg 10: [mem 0xf01a6900-0xf01a690f 64bit]
[ 0.296639] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.296642] pci 0000:00:03.0: PME# disabled
[ 0.296655] pci 0000:00:03.2: [8086:29b6] type 0 class 0x000101
[ 0.296665] pci 0000:00:03.2: reg 10: [io 0x2238-0x223f]
[ 0.296671] pci 0000:00:03.2: reg 14: [io 0x2270-0x2273]
[ 0.296677] pci 0000:00:03.2: reg 18: [io 0x2240-0x2247]
[ 0.296683] pci 0000:00:03.2: reg 1c: [io 0x2274-0x2277]
[ 0.296689] pci 0000:00:03.2: reg 20: [io 0x21e0-0x21ef]
[ 0.296720] pci 0000:00:03.3: [8086:29b7] type 0 class 0x000700
[ 0.296730] pci 0000:00:03.3: reg 10: [io 0x2248-0x224f]
[ 0.296736] pci 0000:00:03.3: reg 14: [mem 0xf01a4000-0xf01a4fff]
[ 0.296801] pci 0000:00:19.0: [8086:10bd] type 0 class 0x000200
[ 0.296817] pci 0000:00:19.0: reg 10: [mem 0xf0180000-0xf019ffff]
[ 0.296825] pci 0000:00:19.0: reg 14: [mem 0xf01a5000-0xf01a5fff]
[ 0.296833] pci 0000:00:19.0: reg 18: [io 0x2100-0x211f]
[ 0.296877] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.296880] pci 0000:00:19.0: PME# disabled
[ 0.296897] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.296935] pci 0000:00:1a.0: reg 20: [io 0x2120-0x213f]
[ 0.296973] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.297012] pci 0000:00:1a.1: reg 20: [io 0x2140-0x215f]
[ 0.297059] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.297078] pci 0000:00:1a.7: reg 10: [mem 0xf01a6000-0xf01a63ff]
[ 0.297143] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.297148] pci 0000:00:1a.7: PME# disabled
[ 0.297168] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.297181] pci 0000:00:1b.0: reg 10: [mem 0xf01a0000-0xf01a3fff 64bit]
[ 0.297229] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.297233] pci 0000:00:1b.0: PME# disabled
[ 0.297250] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.297297] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.297301] pci 0000:00:1c.0: PME# disabled
[ 0.297319] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
[ 0.297367] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.297370] pci 0000:00:1c.1: PME# disabled
[ 0.297395] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.297433] pci 0000:00:1d.0: reg 20: [io 0x2160-0x217f]
[ 0.297472] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.297510] pci 0000:00:1d.1: reg 20: [io 0x2180-0x219f]
[ 0.297549] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.297587] pci 0000:00:1d.2: reg 20: [io 0x21a0-0x21bf]
[ 0.297633] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.297652] pci 0000:00:1d.7: reg 10: [mem 0xf01a6400-0xf01a67ff]
[ 0.297717] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.297722] pci 0000:00:1d.7: PME# disabled
[ 0.297739] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.297788] pci 0000:00:1f.0: [8086:2914] type 0 class 0x000601
[ 0.297860] pci 0000:00:1f.0: quirk: [io 0xf800-0xf87f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.297865] pci 0000:00:1f.0: quirk: [io 0xfa00-0xfa3f] claimed by ICH6 GPIO
[ 0.297869] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
[ 0.297873] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
[ 0.297876] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
[ 0.297908] pci 0000:00:1f.2: [8086:2920] type 0 class 0x000101
[ 0.297922] pci 0000:00:1f.2: reg 10: [io 0x2250-0x2257]
[ 0.297929] pci 0000:00:1f.2: reg 14: [io 0x2278-0x227b]
[ 0.297937] pci 0000:00:1f.2: reg 18: [io 0x2258-0x225f]
[ 0.297944] pci 0000:00:1f.2: reg 1c: [io 0x227c-0x227f]
[ 0.297951] pci 0000:00:1f.2: reg 20: [io 0x21f0-0x21ff]
[ 0.297959] pci 0000:00:1f.2: reg 24: [io 0x2200-0x220f]
[ 0.297996] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
[ 0.298010] pci 0000:00:1f.5: reg 10: [io 0x2260-0x2267]
[ 0.298017] pci 0000:00:1f.5: reg 14: [io 0x2280-0x2283]
[ 0.298024] pci 0000:00:1f.5: reg 18: [io 0x2268-0x226f]
[ 0.298032] pci 0000:00:1f.5: reg 1c: [io 0x2284-0x2287]
[ 0.298039] pci 0000:00:1f.5: reg 20: [io 0x2210-0x221f]
[ 0.298046] pci 0000:00:1f.5: reg 24: [io 0x2220-0x222f]
[ 0.298108] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
[ 0.298112] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.298116] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.298121] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.298179] pci 0000:30:00.0: [8086:10d3] type 0 class 0x000200
[ 0.298203] pci 0000:30:00.0: reg 10: [mem 0xf0280000-0xf029ffff]
[ 0.298220] pci 0000:30:00.0: reg 14: [mem 0xf0200000-0xf027ffff]
[ 0.298237] pci 0000:30:00.0: reg 18: [io 0x1100-0x111f]
[ 0.298254] pci 0000:30:00.0: reg 1c: [mem 0xf02a0000-0xf02a3fff]
[ 0.298300] pci 0000:30:00.0: reg 30: [mem 0x00000000-0x0003ffff pref]
[ 0.298351] pci 0000:30:00.0: PME# supported from D0 D3hot D3cold
[ 0.298358] pci 0000:30:00.0: PME# disabled
[ 0.304035] pci 0000:00:1c.1: PCI bridge to [bus 30-30]
[ 0.304039] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.304044] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.304050] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.304108] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.304112] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.304117] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.304123] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.304126] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.304129] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.304144] pci_bus 0000:00: on NUMA node 0
[ 0.304147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.304345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[ 0.304397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
[ 0.304451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.304636] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.304642] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f24406c8), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.304651] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110316/nspredef-352)
[ 0.304657] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.304705] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.304711] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f24406c8), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.304719] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110316/nspredef-352)
[ 0.304724] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.315545] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.315590] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.315634] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.315676] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.315718] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.315760] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.315802] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.315844] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.315930] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.315941] vgaarb: loaded
[ 0.315972] PCI: Using ACPI for IRQ routing
[ 0.315974] PCI: pci_cache_line_size set to 64 bytes
[ 0.316045] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.316047] reserve RAM buffer: 00000000defafe00 - 00000000dfffffff
[ 0.316147] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.316152] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.316157] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.320034] Switching to clocksource hpet
[ 0.321200] pnp: PnP ACPI init
[ 0.321211] ACPI: bus type pnp registered
[ 0.321346] pnp 00:00: [mem 0xf8000000-0xfebfffff window]
[ 0.321349] pnp 00:00: [bus 00-ff]
[ 0.321351] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.321353] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.321356] pnp 00:00: [io 0x1000-0x2fff window]
[ 0.321358] pnp 00:00: [io 0x3000-0x6fff window]
[ 0.321360] pnp 00:00: [io 0x7000-0xafff window]
[ 0.321362] pnp 00:00: [io 0xb000-0xffff window]
[ 0.321364] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.321367] pnp 00:00: [mem 0xe0000000-0xf3ffffff window]
[ 0.321405] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.321416] pnp 00:01: [io 0x00f0-0x00ff]
[ 0.321423] pnp 00:01: [irq 13]
[ 0.321445] pnp 00:01: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.321457] pnp 00:02: [io 0x0000-0x000f]
[ 0.321459] pnp 00:02: [io 0x0080-0x008f]
[ 0.321461] pnp 00:02: [io 0x00c0-0x00df]
[ 0.321463] pnp 00:02: [dma 4]
[ 0.321484] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.321492] pnp 00:03: [io 0x0070-0x0071]
[ 0.321497] pnp 00:03: [irq 8]
[ 0.321519] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.321527] pnp 00:04: [io 0x0061]
[ 0.321549] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.321559] pnp 00:05: [irq 12]
[ 0.321584] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
[ 0.321592] pnp 00:06: [io 0x0060]
[ 0.321594] pnp 00:06: [io 0x0064]
[ 0.321598] pnp 00:06: [irq 1]
[ 0.321620] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.321834] pnp 00:07: [irq 7]
[ 0.321836] pnp 00:07: [dma 3]
[ 0.321838] pnp 00:07: [io 0x0378-0x037f]
[ 0.321840] pnp 00:07: [io 0x0778-0x077d]
[ 0.321904] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.322065] pnp 00:08: [irq 4]
[ 0.322067] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.322132] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.322278] pnp 00:09: [irq 6]
[ 0.322280] pnp 00:09: [dma 2]
[ 0.322282] pnp 00:09: [io 0x03f0-0x03f5]
[ 0.322284] pnp 00:09: [io 0x03f7]
[ 0.322318] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.322358] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.322383] pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active)
[ 0.322414] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.322440] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.322592] pnp 00:0c: [io 0x0010-0x001f]
[ 0.322595] pnp 00:0c: [io 0x0050-0x0053]
[ 0.322597] pnp 00:0c: [io 0x0072-0x0077]
[ 0.322598] pnp 00:0c: [io 0x0090-0x009f]
[ 0.322649] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.322659] pnp 00:0d: [io 0x0400-0x041f]
[ 0.322661] pnp 00:0d: [io 0x0420-0x043f]
[ 0.322663] pnp 00:0d: [io 0x0440-0x045f]
[ 0.322664] pnp 00:0d: [io 0x0460-0x047f]
[ 0.322666] pnp 00:0d: [io 0x0480-0x048f]
[ 0.322668] pnp 00:0d: [io 0xf800-0xf81f]
[ 0.322670] pnp 00:0d: [io 0xf820-0xf83f]
[ 0.322672] pnp 00:0d: [io 0xf840-0xf85f]
[ 0.322674] pnp 00:0d: [io 0xf860-0xf87f]
[ 0.322676] pnp 00:0d: [io 0xfa00-0xfa3f]
[ 0.322679] pnp 00:0d: [io 0xfc00-0xfc7f]
[ 0.322681] pnp 00:0d: [io 0xfc80-0xfcff]
[ 0.322683] pnp 00:0d: [io 0xfe00-0xfe7f]
[ 0.322684] pnp 00:0d: [io 0xfe80-0xfeff]
[ 0.322706] pnp 00:0d: disabling [io 0xf800-0xf81f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.322709] pnp 00:0d: disabling [io 0xf820-0xf83f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.322712] pnp 00:0d: disabling [io 0xf840-0xf85f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.322715] pnp 00:0d: disabling [io 0xf860-0xf87f] because it overlaps 0000:00:1f.0 BAR 13 [io 0xf800-0xf87f]
[ 0.322760] system 00:0d: [io 0x0400-0x041f] has been reserved
[ 0.322763] system 00:0d: [io 0x0420-0x043f] has been reserved
[ 0.322765] system 00:0d: [io 0x0440-0x045f] has been reserved
[ 0.322768] system 00:0d: [io 0x0460-0x047f] has been reserved
[ 0.322771] system 00:0d: [io 0x0480-0x048f] has been reserved
[ 0.322774] system 00:0d: [io 0xfa00-0xfa3f] has been reserved
[ 0.322776] system 00:0d: [io 0xfc00-0xfc7f] has been reserved
[ 0.322779] system 00:0d: [io 0xfc80-0xfcff] has been reserved
[ 0.322782] system 00:0d: [io 0xfe00-0xfe7f] has been reserved
[ 0.322784] system 00:0d: [io 0xfe80-0xfeff] has been reserved
[ 0.322787] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.322805] pnp 00:0e: [io 0x004e-0x004f]
[ 0.322807] pnp 00:0e: [io 0x04d0-0x04d1]
[ 0.322809] pnp 00:0e: [io 0x0cb0-0x0cbf]
[ 0.322858] system 00:0e: [io 0x04d0-0x04d1] has been reserved
[ 0.322860] system 00:0e: [io 0x0cb0-0x0cbf] has been reserved
[ 0.322863] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.323958] Switched to NOHz mode on CPU #0
[ 0.323989] Switched to NOHz mode on CPU #1
[ 0.324024] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.324027] pnp 00:0f: [mem 0x00100000-0xdfffffff]
[ 0.324029] pnp 00:0f: [mem 0x000e4000-0x000fffff]
[ 0.324033] pnp 00:0f: [mem 0xfec01000-0xfecfffff]
[ 0.324035] pnp 00:0f: [mem 0xfed00400-0xfed3ffff]
[ 0.324038] pnp 00:0f: [mem 0xfed40000-0xffffffff]
[ 0.324040] pnp 00:0f: [mem 0xf4000000-0xf7ffffff]
[ 0.324042] pnp 00:0f: [mem 0x000ce400-0x000e3fff]
[ 0.324109] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.324112] system 00:0f: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.324116] system 00:0f: [mem 0x000e4000-0x000fffff] could not be reserved
[ 0.324119] system 00:0f: [mem 0xfec01000-0xfecfffff] has been reserved
[ 0.324122] system 00:0f: [mem 0xfed00400-0xfed3ffff] has been reserved
[ 0.324126] system 00:0f: [mem 0xfed40000-0xffffffff] could not be reserved
[ 0.324134] system 00:0f: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.324138] system 00:0f: [mem 0x000ce400-0x000e3fff] has been reserved
[ 0.324141] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.324151] pnp: PnP ACPI: found 16 devices
[ 0.324152] ACPI: ACPI bus type pnp unregistered
[ 0.324155] PnPBIOS: Disabled by ACPI PNP
[ 0.360114] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0300000-0xf03fffff pref]
[ 0.360120] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0500000-0xf06fffff]
[ 0.360126] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0700000-0xf08fffff 64bit pref]
[ 0.360131] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.360134] pci 0000:00:1c.0: PCI bridge to [bus 20-20]
[ 0.360137] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.360141] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf06fffff]
[ 0.360145] pci 0000:00:1c.0: bridge window [mem 0xf0700000-0xf08fffff 64bit pref]
[ 0.360152] pci 0000:30:00.0: BAR 6: assigned [mem 0xf0300000-0xf033ffff pref]
[ 0.360154] pci 0000:00:1c.1: PCI bridge to [bus 30-30]
[ 0.360157] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.360162] pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.360165] pci 0000:00:1c.1: bridge window [mem 0xf0300000-0xf04fffff pref]
[ 0.360171] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 0.360173] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.360177] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.360180] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.360191] pci 0000:00:1c.0: setting latency timer to 64
[ 0.360200] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.360203] pci 0000:00:1c.1: setting latency timer to 64
[ 0.360209] pci 0000:00:1e.0: setting latency timer to 64
[ 0.360212] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.360215] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.360217] pci_bus 0000:20: resource 0 [io 0x3000-0x3fff]
[ 0.360219] pci_bus 0000:20: resource 1 [mem 0xf0500000-0xf06fffff]
[ 0.360222] pci_bus 0000:20: resource 2 [mem 0xf0700000-0xf08fffff 64bit pref]
[ 0.360224] pci_bus 0000:30: resource 0 [io 0x1000-0x1fff]
[ 0.360226] pci_bus 0000:30: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.360228] pci_bus 0000:30: resource 2 [mem 0xf0300000-0xf04fffff pref]
[ 0.360231] pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
[ 0.360233] pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.360271] NET: Registered protocol family 2
[ 0.360357] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.360571] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.360873] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.361010] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.361012] TCP reno registered
[ 0.361015] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.361021] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.361202] NET: Registered protocol family 1
[ 0.361214] pci 0000:00:02.0: Boot video device
[ 0.361330] PCI: CLS 64 bytes, default 64
[ 0.361364] Unpacking initramfs...
[ 0.598256] Freeing initrd memory: 9292k freed
[ 0.601241] DMAR: Host address width 36
[ 0.601244] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.601265] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020a30270 ecap 1000
[ 0.601267] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.601273] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c0000020230270 ecap 1000
[ 0.601275] DMAR: DRHD base: 0x000000fed92000 flags: 0x0
[ 0.601280] IOMMU 2: reg_base_addr fed92000 ver 1:0 cap c0000020230270 ecap 1000
[ 0.601282] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.601287] IOMMU 3: reg_base_addr fed93000 ver 1:0 cap c9008020230270 ecap 1000
[ 0.601289] DMAR: RMRR base: 0x000000df600000 end: 0x000000dfffffff
[ 0.601291] DMAR: RMRR base: 0x000000defd0000 end: 0x000000defd0fff
[ 0.601293] DMAR: RMRR base: 0x000000defd1000 end: 0x000000defd1fff
[ 0.601294] DMAR: RMRR base: 0x000000defd2000 end: 0x000000defd2fff
[ 0.601296] DMAR: RMRR base: 0x000000defd3000 end: 0x000000defd3fff
[ 0.601298] DMAR: RMRR base: 0x000000defd4000 end: 0x000000defd4fff
[ 0.601300] DMAR: RMRR base: 0x000000defd5000 end: 0x000000defd5fff
[ 0.601302] DMAR: RMRR base: 0x000000defd6000 end: 0x000000defd6fff
[ 0.601303] DMAR: No ATSR found
[ 0.601639] audit: initializing netlink socket (disabled)
[ 0.601653] type=2000 audit(1329726575.596:1): initialized
[ 0.617107] highmem bounce pool size: 64 pages
[ 0.617112] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.618141] VFS: Disk quotas dquot_6.5.2
[ 0.618231] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.618341] msgmni has been set to 1631
[ 0.618519] alg: No test for stdrng (krng)
[ 0.618544] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.618547] io scheduler noop registered
[ 0.618549] io scheduler deadline registered
[ 0.618561] io scheduler cfq registered (default)
[ 0.618636] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.618672] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.618725] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.618755] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.618905] ERST: Table is not found!
[ 0.618915] isapnp: Scanning for PnP cards...
[ 0.971756] isapnp: No Plug & Play device found
[ 0.971803] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.992148] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.012811] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.012946] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.032981] 0000:00:03.3: ttyS1 at I/O 0x2248 (irq = 17) is a 16550A
[ 1.033180] Linux agpgart interface v0.103
[ 1.033288] agpgart-intel 0000:00:00.0: Intel Q35 Chipset
[ 1.033366] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.034290] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.034392] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.034542] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.037353] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.037358] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.037454] mousedev: PS/2 mouse device common for all mice
[ 1.037504] rtc_cmos 00:03: RTC can wake from S4
[ 1.040119] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.040142] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.040156] cpuidle: using governor ladder
[ 1.040164] cpuidle: using governor menu
[ 1.040389] TCP cubic registered
[ 1.040427] NET: Registered protocol family 10
[ 1.041027] Mobile IPv6
[ 1.041030] NET: Registered protocol family 17
[ 1.041034] Registering the dns_resolver key type
[ 1.041057] Using IPI No-Shortcut mode
[ 1.041126] PM: Hibernation image not present or could not be loaded.
[ 1.041135] registered taskstats version 1
[ 1.041887] rtc_cmos 00:03: setting system clock to 2012-02-20 08:29:36 UTC (1329726576)
[ 1.041912] Initializing network drop monitor service
[ 1.041980] Freeing unused kernel memory: 440k freed
[ 1.042098] Write protecting the kernel text: 2788k
[ 1.042127] Write protecting the kernel read-only data: 1036k
[ 1.042128] NX-protecting the kernel data: 3356k
[ 1.053906] udev[47]: starting version 164
[ 1.055496] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.119744] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 1.119746] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.119779] e1000e 0000:00:19.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.119788] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.119883] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 1.168499] FDC 0 is a post-1991 82077
[ 1.174197] SCSI subsystem initialized
[ 1.186593] usbcore: registered new interface driver usbfs
[ 1.186614] usbcore: registered new interface driver hub
[ 1.200782] usbcore: registered new device driver usb
[ 1.205807] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.206111] libata version 3.00 loaded.
[ 1.229775] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.478275] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0f:fe:7e:a7:7b
[ 1.478278] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.478300] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: 1062FF-0FF
[ 1.478323] e1000e 0000:30:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.478327] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.478345] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.478349] e1000e 0000:30:00.0: setting latency timer to 64
[ 1.478351] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.478384] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.478526] e1000e 0000:30:00.0: irq 43 for MSI/MSI-X
[ 1.478529] e1000e 0000:30:00.0: irq 44 for MSI/MSI-X
[ 1.478532] e1000e 0000:30:00.0: irq 45 for MSI/MSI-X
[ 1.478700] e1000e 0000:30:00.0: Disabling ASPM L0s
[ 1.480042] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.483927] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.483942] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf01a6000
[ 1.496020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.496040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.496043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.496046] usb usb1: Product: EHCI Host Controller
[ 1.496048] usb usb1: Manufacturer: Linux 2.6.39-bpo.2-686-pae ehci_hcd
[ 1.496050] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.496163] hub 1-0:1.0: USB hub found
[ 1.496167] hub 1-0:1.0: 4 ports detected
[ 1.496238] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.496248] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.496251] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.496259] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.496290] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.500161] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.500174] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf01a6400
[ 1.516022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.516050] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.516053] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.516056] usb usb2: Product: EHCI Host Controller
[ 1.516058] usb usb2: Manufacturer: Linux 2.6.39-bpo.2-686-pae ehci_hcd
[ 1.516060] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.516159] hub 2-0:1.0: USB hub found
[ 1.516163] hub 2-0:1.0: 6 ports detected
[ 1.516234] ata_piix 0000:00:1f.2: version 2.13
[ 1.516246] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.516251] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.600047] Refined TSC clocksource calibration: 2327.499 MHz.
[ 1.600052] Switching to clocksource tsc
[ 1.603412] e1000e 0000:30:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:9d:59:ff
[ 1.603415] e1000e 0000:30:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 1.603428] e1000e 0000:30:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-005
[ 1.672035] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.672325] scsi0 : ata_piix
[ 1.672398] scsi1 : ata_piix
[ 1.672544] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x21f0 irq 14
[ 1.672549] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x21f8 irq 15
[ 1.672569] ata_piix 0000:00:1f.5: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.672574] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.828029] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.828245] scsi2 : ata_piix
[ 1.828297] scsi3 : ata_piix
[ 1.828376] ata3: SATA max UDMA/133 cmd 0x2260 ctl 0x2280 bmdma 0x2210 irq 18
[ 1.828379] ata4: SATA max UDMA/133 cmd 0x2268 ctl 0x2284 bmdma 0x2218 irq 18
[ 1.828411] ata_generic 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.828432] ata_generic 0000:00:03.2: setting latency timer to 64
[ 1.828680] scsi4 : ata_generic
[ 1.828780] scsi5 : ata_generic
[ 1.828822] ata5: PATA max UDMA/100 cmd 0x2238 ctl 0x2270 bmdma 0x21e0 irq 18
[ 1.828824] ata6: PATA max UDMA/100 cmd 0x2240 ctl 0x2274 bmdma 0x21e8 irq 18
[ 1.828850] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.828856] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.828859] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.828868] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.856036] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002120
[ 1.856066] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.856069] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.856072] usb usb3: Product: UHCI Host Controller
[ 1.856074] usb usb3: Manufacturer: Linux 2.6.39-bpo.2-686-pae uhci_hcd
[ 1.856076] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.856185] hub 3-0:1.0: USB hub found
[ 1.856189] hub 3-0:1.0: 2 ports detected
[ 1.856256] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.856262] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.856265] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.856271] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.868048] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002140
[ 1.868077] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.868080] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.868083] usb usb4: Product: UHCI Host Controller
[ 1.868085] usb usb4: Manufacturer: Linux 2.6.39-bpo.2-686-pae uhci_hcd
[ 1.868087] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.868186] hub 4-0:1.0: USB hub found
[ 1.868196] hub 4-0:1.0: 2 ports detected
[ 1.868253] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.868258] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.868261] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.868269] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.868302] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002160
[ 1.868328] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.868331] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.868333] usb usb5: Product: UHCI Host Controller
[ 1.868335] usb usb5: Manufacturer: Linux 2.6.39-bpo.2-686-pae uhci_hcd
[ 1.868337] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.868420] hub 5-0:1.0: USB hub found
[ 1.868423] hub 5-0:1.0: 2 ports detected
[ 1.868478] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.868484] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.868487] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.868494] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.868526] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002180
[ 1.868552] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.868554] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.868557] usb usb6: Product: UHCI Host Controller
[ 1.868558] usb usb6: Manufacturer: Linux 2.6.39-bpo.2-686-pae uhci_hcd
[ 1.868560] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.868644] hub 6-0:1.0: USB hub found
[ 1.868648] hub 6-0:1.0: 2 ports detected
[ 1.868703] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 1.868709] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.868712] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.868718] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.868749] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000021a0
[ 1.868775] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.868777] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.868780] usb usb7: Product: UHCI Host Controller
[ 1.868781] usb usb7: Manufacturer: Linux 2.6.39-bpo.2-686-pae uhci_hcd
[ 1.868783] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.868865] hub 7-0:1.0: USB hub found
[ 1.868869] hub 7-0:1.0: 2 ports detected
[ 2.158587] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.180018] usb 5-2: new low speed USB device number 2 using uhci_hcd
[ 2.312070] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.320600] ata4.00: ATA-8: WDC WD5001AALS-00L3B2, 01.03B01, max UDMA/133
[ 2.320604] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.336626] ata4.00: configured for UDMA/133
[ 2.352330] usb 5-2: New USB device found, idVendor=09da, idProduct=000a
[ 2.352333] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.352336] usb 5-2: Product: USB Mouse
[ 2.352337] usb 5-2: Manufacturer: A4Tech
[ 2.468113] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.468126] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2.468136] ata2.01: link offline, clearing class 3 to NONE
[ 2.468247] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.468257] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 2.477282] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 01.03E01, max UDMA/133
[ 2.477285] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.484315] ata1.00: configured for UDMA/133
[ 2.484441] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 01.0 PQ: 0 ANSI: 5
[ 2.500132] ata2.00: ATAPI: ATAPI DVD D DH16D2S, EH33, max UDMA/100
[ 2.540123] ata2.00: configured for UDMA/100
[ 2.542598] scsi 1:0:0:0: CD-ROM ATAPI DVD D DH16D2S EH33 PQ: 0 ANSI: 5
[ 2.542813] scsi 3:0:0:0: Direct-Access ATA WDC WD5001AALS-0 01.0 PQ: 0 ANSI: 5
[ 2.716136] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.716139] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.716230] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.717003] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.717048] sd 0:0:0:0: [sda] Write Protect is off
[ 2.717050] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.717070] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.717737] usbcore: registered new interface driver usbhid
[ 2.717739] usbhid: USB HID core driver
[ 2.717806] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.717849] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.717852] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.717871] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.723653] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.723684] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.723711] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.728587] sdb: unknown partition table
[ 2.728767] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.740537] sda: sda1 sda2 < sda5 >
[ 2.740769] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.980019] PM: Starting manual resume from disk
[ 2.980027] PM: Hibernation image partition 8:5 present
[ 2.980029] PM: Looking for hibernation image.
[ 2.980186] PM: Image not found (code -22)
[ 2.980189] PM: Hibernation image not present or could not be loaded.
[ 3.001802] EXT3-fs: barriers not enabled
[ 3.012703] kjournald starting. Commit interval 5 seconds
[ 3.012733] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 3.837983] udev[434]: starting version 164
[ 4.024669] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 4.024675] ACPI: Power Button [PBTN]
[ 4.024721] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.024724] ACPI: Power Button [PWRF]
[ 4.148849] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.161520] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input4
[ 4.161631] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-2/input0
[ 4.187860] wmi: Mapper loaded
[ 4.224539] ACPI: acpi_idle registered with cpuidle
[ 4.244941] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.244993] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 4.268399] Marking TSC unstable due to TSC halts in idle
[ 4.268496] Switching to clocksource hpet
[ 4.316423] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 4.402341] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.463738] [drm] Initialized drm 1.1.0 20060810
[ 4.633214] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 4.633256] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 4.633277] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.042497] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 5.043803] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.043808] i915 0000:00:02.0: setting latency timer to 64
[ 5.064016] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 5.064018] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 5.064304] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 5.064309] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.064310] [drm] Driver supports precise vblank timestamp query.
[ 5.068063] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.068403] [drm] initialized overlay support
[ 5.150640] fbcon: inteldrmfb (fb0) is primary device
[ 5.198653] Console: switching to colour frame buffer device 210x65
[ 5.204652] fb0: inteldrmfb frame buffer device
[ 5.204654] drm: registered panic notifier
[ 5.204708] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110316/video-1148)
[ 5.204762] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 5.204796] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 5.204908] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.476386] Adding 4881404k swap on /dev/sda5. Priority:-1 extents:1 across:4881404k
[ 5.606523] EXT3-fs (sda1): using internal journal
[ 5.732532] loop: module loaded
[ 5.780210] md: md127 stopped.
[ 5.782378] md: bind<sdb>
[ 6.976177] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 7.032060] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 7.032259] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.857504] sshd (1397): /proc/1397/oom_adj is deprecated, please use /proc/1397/oom_score_adj instead.
[ 8.428879] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 8.428883] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 8.429022] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.736024] eth0: no IPv6 routers present
[ 6527.990476] Bluetooth: Core ver 2.16
[ 6527.990494] NET: Registered protocol family 31
[ 6527.990496] Bluetooth: HCI device and connection manager initialized
[ 6527.990498] Bluetooth: HCI socket layer initialized
[ 6527.990500] Bluetooth: L2CAP socket layer initialized
[ 6527.990523] Bluetooth: SCO socket layer initialized
[ 6528.005397] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6528.005399] Bluetooth: BNEP filters: protocol multicast
[ 6528.007148] Bluetooth: RFCOMM TTY layer initialized
[ 6528.007152] Bluetooth: RFCOMM socket layer initialized
[ 6528.007153] Bluetooth: RFCOMM ver 1.11
[ 6528.021311] Bridge firewalling registered
[ 6532.995094] device-mapper: uevent: version 1.0.3
[ 6532.995155] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 6539.927585] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 6539.927894] SGI XFS Quota Management subsystem
[ 6539.952804] JFS: nTxBlock = 8192, nTxLock = 65536
[ 6539.994354] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 6540.019662] QNX4 filesystem 0.2.3 registered.
[ 6540.079904] Btrfs loaded
[ 6545.273998] fuse init (API version 7.16)
[ 6561.672660] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 6563.516979] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 6563.516983] e1000e 0000:30:00.0: eth1: 10/100 speed: disabling TSO
[ 6563.517275] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 6574.472018] eth1: no IPv6 routers present