Linux в Acer Aspire One

Материал из Xgu.ru

(Перенаправлено с Acer)
Перейти к: навигация, поиск
Короткий URL: acer
Acer-aspire-one.jpg

Содержание

[править] Тактико-технические характеристики

clint@sergey:~/doc$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller (rev 02)
03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)

[править] Инсталляция Linux

[править] Жёсткий диск

[править] Сеть

[править] Wi-Fi

sudo wget -c http://snapshots.madwifi-project.org/madwifi-hal-0.10.5.6-current.tar.gz

sudo tar xvzf madwifi-hal-0.10.5.6-current.tar.gz

cd madwifi-hal-0.10.5.6-r4068-20090705/

sudo make

sudo make install

Адаптер:

clint@sergey:~$ lspci -v -s 03:00.0
03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
        Subsystem: Foxconn International, Inc. Device e008
        Flags: bus master, fast devsel, latency 0, IRQ 18
        Memory at 55200000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: ath_pci
        Kernel modules: ath_pci, ath5k

Собирался модуль из:

clint@sergey:~$ ls -l /usr/src/ | grep madwifi
drwxr-xr-x 14 root  root      800 Сен 28 19:41 madwifi-hal-0.10.5.6-r3861-20080903
-rw-r--r--  1 root  src   4418145 Сен 23 19:46 madwifi-hal-0.10.5.6-r3861-20080903.tar.gz
clint@sergey:~$ grep -r ath /etc/modules 
ath_pci
clint@sergey:~$ grep -r ath /etc/modprobe.d/*
/etc/modprobe.d/blacklist:blacklist ath5k

Настройка в качестве клиента стационарной точки доступа:

iface ath0 inet static
pre-up ifconfig ath0 up; wpa_supplicant -i ath0 -c /etc/wpa_supplicant.conf -B; sleep 3
#
        address 10.0.17.100
       netmask 255.255.0.0
        gateway 10.0.35.1
        dns-nameservers 10.0.17.1


clint@sergey:~$ cat /etc/wpa_supplicant.conf 
ctrl_interface=/var/run/wpa_supplicant
update_config=1

network={
        ssid="Cherep"
        psk="********"
        proto=RSN
        key_mgmt=WPA-PSK
        pairwise=TKIP
        id_str=""
}
clint@sergey:~$ sudo ifup -v ath0
Configuring interface ath0=ath0 (inet)
ifconfig ath0 up; wpa_supplicant -i ath0 -c /etc/wpa_supplicant.conf -B; sleep 3
run-parts --verbose /etc/network/if-pre-up.d
run-parts: executing /etc/network/if-pre-up.d/hostapd
run-parts: executing /etc/network/if-pre-up.d/wireless-tools
run-parts: executing /etc/network/if-pre-up.d/wpasupplicant

ifconfig ath0 10.0.17.100 netmask 255.255.0.0           up
 route add default gw 10.0.35.1  ath0 
run-parts --verbose /etc/network/if-up.d
run-parts: executing /etc/network/if-up.d/avahi-daemon
run-parts: executing /etc/network/if-up.d/mountnfs
run-parts: executing /etc/network/if-up.d/ntpdate
run-parts: executing /etc/network/if-up.d/openssh-server
run-parts: executing /etc/network/if-up.d/wpasupplicant


В режиме точки доступа

clint@sergey:~$ cat /sbin/home 
#!/bin/sh
set -x
modprobe -r -v ath_pci ath_rate_sample
#sleep 4
modprobe ath_pci autocreate=ap
sysctl -f
ifconfig ath0 192.168.77.77 up
iwconfig ath0 essid clinika rate 54M 
route add default gw 192.168.77.88
hostapd -B /etc/hostapd/hostapd.conf_back 
clint@sergey:~$ egrep -v "^\ *$|^#" /etc/hostapd/hostapd.conf_back | less
interface=ath0
driver=madwifi
logger_syslog=-1
logger_syslog_level=1
logger_stdout=-1
logger_stdout_level=2
debug=0
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=clinika
hw_mode=g
channel=6
beacon_int=100
dtim_period=2
max_num_sta=1
rts_threshold=2347
fragm_threshold=2346
macaddr_acl=0
auth_algs=3
ignore_broadcast_ssid=0
wme_enabled=1
wme_ac_bk_cwmin=4
wme_ac_bk_cwmax=10
wme_ac_bk_aifs=7
wme_ac_bk_txop_limit=0
wme_ac_bk_acm=0
wme_ac_be_aifs=3
wme_ac_be_cwmin=4
wme_ac_be_cwmax=10
wme_ac_be_txop_limit=0
wme_ac_be_acm=0
wme_ac_vi_aifs=2
wme_ac_vi_cwmin=3
wme_ac_vi_cwmax=4
wme_ac_vi_txop_limit=94
wme_ac_vi_acm=0
wme_ac_vo_aifs=2
wme_ac_vo_cwmin=2
wme_ac_vo_cwmax=3
wme_ac_vo_txop_limit=47
wme_ac_vo_acm=0
eap_message=hello
eapol_key_index_workaround=1
use_pae_group_addr=1
eap_server=0
own_ip_addr=192.168.77.77
wpa=1
wpa_passphrase=********
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
wpa_group_rekey=600
wpa_strict_rekey=1
wpa_gmk_rekey=86400

На клиенте для подключения к этой точке доступа:

iface wlan0 inet static
pre-up ip link set wlan0 up
pre-up iwconfig wlan0 mode managed essid clinika
pre-up iwpriv wlan0 set AuthMode=WPAPSK
pre-up iwpriv wlan0 set WPAPSK=********
pre-up iwpriv wlan0 set EncrypType=TKIP 
        address 192.168.77.88
        netmask 255.255.255.0
post-up iptables -t nat -A POSTROUTING -s 192.168.77.77 -j MASQUERADE

[править] Изображение

[править] Xorg.conf

 cat /etc/X11/xorg.conf
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Synaptics Mouse" "AlwaysCore"
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/share/fonts/X11/cyrillic"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/share/fonts/X11/100dpi"
        FontPath     "/usr/share/fonts/X11/75dpi"
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load  "glx"
        Load  "extmod"
        Load  "record"
        Load  "dri2"
        Load  "dbe"
        Load  "dri"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option          "XkbLayout"     "us,ru"
        Option          "XkbOptions"    "grp:ctrl_shift_toggle"
EndSection

Section "InputDevice"
        Identifier                     "Synaptics Mouse"
        Option "Protocol"              "auto-dev"
        Driver                         "synaptics" 
        # cat /proc/bus/input/devices
        Option "Device"                "/dev/my-acer-synaptics"
        #Option "Device"                "/dev/input/event10"
        Option "SHMConfig"             "on" 
        Option "HorizScrollDelta"      "45"
        Option "HorizEdgeScroll"       "on"
        Option "VertEdgeScroll"        "on"
        Option "VertScrollDelta"       "45"
        Option "TapButton1"            "1"
        Option "TapButton2"            "3"
        Option "TapButton3"            "2"
        Option "SendCoreEvents"        "on"
        Option "LeftEdge"              "1700"
        Option "RightEdge"             "5300"
        Option "TopEdge"               "1700"
        Option "BottomEdge"            "4200"
        Option "AccelFactor"           "0.0015"
        #Option      "CircularScrolling"          "on"
       # Option      "CircScrollTrigger"          "0"
#Option "FingerLow" "25"
#Option "FingerHigh" "30"
#Option "MaxTapTime" "180"
#Option "MaxTapMove" "220"
#Option "VertScrollDelta" "100"
#Option "MinSpeed" "0.09"
#Option "MaxSpeed" "0.18"
#       Option          "CorePointer"
#       Option          "Device"                "/dev/input/mice"
#       Option          "Protocol"              "ImPS/2"
#       Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        Option          "DPMS"
DisplaySize 195 113
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "ColorKey"                  # <i>
        #Option     "CacheLines"                # <i>
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "DRI"                       # [<bool>]
        #Option     "NoDDC"                     # [<bool>]
        #Option     "ShowCache"                 # [<bool>]
        #Option     "XvMCSurfaces"              # <i>
        #Option     "PageFlip"                  # [<bool>]
        Identifier  "Card0"
        Option      "Clone" "true"
        Option          "DRI" "true"
        Option          "MigrationHeuristic" "greedy"
        Option          "AccelMethod" "EXA"
Option "NoDDC"
        Driver      "intel"
        VendorName  "Intel Corporation"
        BoardName   "Mobile 945GME Express Integrated Graphics Controller"
        BusID       "PCI:0:2:0"
Option "ForceEnablePipeA" "true"
Option "FramebufferCompression" "off"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "ServerFlags"
#  Option "DontZap" "true"
#  Option "DontVTSwitch" "true"
EndSection

Section "DRI"
        Mode    0666
EndSection

Section "Extensions"
        Option "Composite" "enable"
EndSection


[править] Внешний монитор

[править] Клавиатура, мышь, тачпад

[править] Клавиатура

[править] Мышь

[править] Тачпад

Может возникнуть ситуация, когда при загрузке ОС устройство Synaptics Touchpad определяется каждый раз под разным именем в каталоге /dev. Можно настроить udev так, чтобы он создавал на это устройство символическую ссылку с постоянным именем, которое потом можно использовать в xorg.conf. Для этого

sudo vim /lib/udev/rules.d/50-udev.rules
 91 #MY-touchpad-sym-link-in-dev
 92 
 93 KERNEL=="event[0-9]*", SUBSYSTEM=="input", ATTRS{protocol}=="SynPS/2", SYMLINK+="my-acer-synaptics"
 94 
 95 # input devices
 96 KERNEL=="mice",                 NAME="input/%k"
 97 KERNEL=="mouse[0-9]*",          NAME="input/%k"
 98 KERNEL=="event[0-9]*",          NAME="input/%k"
 99 KERNEL=="js[0-9]*",             NAME="input/%k"
100 KERNEL=="ts[0-9]*",             NAME="input/%k"
101 KERNEL=="uinput",               NAME="input/%k"
102 

Подробную информацию о устройстве можно получить при помощи команды:

 cat /proc/bus/input/devices 

I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio2/input0
S: Sysfs=/class/input/input9
U: Uniq=
H: Handlers=mouse1 event9 
B: EV=b
B: KEY=6420 0 70000 0 0 0 0 0 0 0 0
B: ABS=11000003

затем,

sudo udevinfo -a -p `udevinfo -q path -n /dev/input/event9 `

 looking at device '/class/input/input9/event9':
    KERNEL=="event9"
    SUBSYSTEM=="input"
    DRIVER==""

  looking at parent device '/devices/platform/i8042/serio2':
    KERNELS=="serio2"
    SUBSYSTEMS=="serio"
    DRIVERS=="psmouse"
    ATTRS{description}=="i8042 AUX1 port"
    ATTRS{modalias}=="serio:ty01pr00id00ex00"
    ATTRS{bind_mode}=="auto"
    ATTRS{protocol}=="SynPS/2"
    ATTRS{rate}=="80"
    ATTRS{resolution}=="200"
    ATTRS{resetafter}=="5"
    ATTRS{resync_time}=="0"

  looking at parent device '/devices/platform/i8042':
    KERNELS=="i8042"
    SUBSYSTEMS=="platform"
    DRIVERS=="i8042"
    ATTRS{modalias}=="platform:i8042"

  looking at parent device '/devices/platform':
    KERNELS=="platform"
    SUBSYSTEMS==""
    DRIVERS==""

[править] Звук

[править] USB-модем

[править] Дополнительная информация