Xgu.ru теперь в Контакте  — приходите и подключайтесь.
Пока мы работаем над следующими видео, вы можете подключиться в Контакте. Познакомимся и обсудим новые страницы и ролики.

Vk-big.pngYoutube-big.jpeg

CCIE plan

Материал из Xgu.ru

Перейти к: навигация, поиск

Содержание

[править] Implement Layer 2 Technologies

  • Implement Spanning Tree Protocol (STP)
    • 802.1d
    • 802.1w
    • 802.1s
    • Loop guard
    • Root guard
    • Bridge protocol data unit (BPDU) guard
    • Storm control
    • Unicast flooding
    • Port roles, failure propagation, and loop guard operation
  • Implement VLAN and VLAN Trunking Protocol (VTP)
    • No VTP (TRANS)
    • Pruning
  • Implement trunk and trunk protocols, EtherChannel, and load-balance
    • Static Config (No DTP)
    • Allowed VLAN
    • Router on a Stick
    • Native VLAN
  • Implement Ethernet technologies
    • Speed and duplex
    • Ethernet, Fast Ethernet, and Gigabit Ethernet
    • PPP over Ethernet (PPPoE)
  • Implement Switched Port Analyzer (SPAN), Remote Switched Port Analyzer (RSPAN), and flow control
    • SPAN and RSPAN
    • Flow Control (DOC-CD)
    • Flow Control (Blog)
  • Implement Frame Relay
    • Local Management Interface (LMI)
    • Traffic shaping
    • Topologies
    • Discard eligible (DE)
    • Static versus Dynamic L2 to L3 Resolution
  • Implement High-Level Data Link Control (HDLC) and PPP

[править] Implement IPv4

  • Implement IP version 4 (IPv4) addressing, subnetting, and variable-length subnet masking (VLSM)
  • Implement IPv4 tunneling and Generic Routing Encapsulation (GRE)
  • Implement IPv4 RIP version 2 (RIPv2)
  • Implement IPv4 Open Shortest Path First (OSPF)
    • Standard OSPF areas
    • Stub area
    • Totally stubby area
    • Not-so-stubby-area (NSSA)
    • Totally NSSA
    • Link-state advertisement (LSA) types
    • Adjacency on a point-to-point and on a multi-access network
    • OSPF graceful restart
  • Implement IPv4 Enhanced Interior Gateway Routing Protocol (EIGRP)
    • Best path
    • Loop-free paths
    • EIGRP operations when alternate loop-free paths are available, and when they are not available
    • EIGRP queries
    • Manual summarization and autosummarization
    • EIGRP stubs
  • Implement IPv4 Border Gateway Protocol (BGP)
    • Next hop
    • Peering
    • Internal Border Gateway Protocol (IBGP) and External Border Gateway Protocol (EBGP)
  • Implement policy routing
  • Implement Performance Routing (PfR) and Cisco Optimized Edge Routing (OER)
  • Implement filtering, route redistribution, summarization, synchronization, attributes, and other advanced features

[править] Implement IPv6

  • Implement IP version 6 (IPv6) addressing and different addressing types
  • Implement IPv6 neighbor discovery
  • Implement basic IPv6 functionality protocols
  • Implement tunneling techniques
  • Implement OSPF version 3 (OSPFv3)
  • Implement EIGRP version 6 (EIGRPv6)
  • Implement filtering and route redistribution

[править] Implement MPLS Layer 3 VPNs

  • Implement Multiprotocol Label Switching (MPLS)
    • MPLS LDP
    • MPLS Label Filtering
  • Implement Layer 3 virtual private networks (VPNs) on provider edge (PE), provider (P), and customer edge (CE) routers
  • Implement virtual routing and forwarding (VRF) and Multi-VRF Customer Edge (VRF-Lite)
  • MP-BGP VPNv4
  • MP-BGP Prefix Filtering
  • PE-CE Routing with RIP
  • PE-CE Routing with OSPF
  • OSPF Sham-Link
  • PE-CE Routing with EIGRP
  • EIGRP SOO and Cost Community
  • PE-CE Routing with BGP
  • BGP SOO
  • BGP AS Override
  • Internet Access
  • AToM
  • L2TPv3
  • MPLS VPN Performance Tuning

[править] Implement IP Multicast

  • Implement Protocol Independent Multicast (PIM) sparse mode
  • Implement Multicast Source Discovery Protocol (MSDP)
  • Implement interdomain multicast routing
  • Implement PIM Auto-Rendezvous Point (Auto-RP), unicast rendezvous point (RP), and bootstrap router (BSR)
  • Implement multicast tools, features, and source-specific multicast
  • Implement IPv6 multicast, PIM, and related multicast protocols, such as Multicast Listener Discovery (MLD)

[править] Implement Network Security

  • Implement access lists
    • IOS ACL Selective IP Option Drop
  • Implement Zone Based Firewall
    • ZFW Rate Limiting
    • ZFW Application Inspection
    • ZFW-Based IOS Transparent Firewall
  • Implement Unicast Reverse Path Forwarding (uRPF)
  • Implement IP Source Guard
  • Implement authentication, authorization, and accounting (AAA) (configuring the AAA server is not required, only the client-side (IOS) is configured)
  • Implement Control Plane Policing (CoPP)
  • Implement Cisco IOS Firewall
    • Classic IOS Transparent Firewall
  • Implement Cisco IOS Intrusion Prevention System (IPS)
  • Implement Secure Shell (SSH)
  • Implement 802.1x
  • Implement NAT
  • Implement routing protocol authentication
  • Implement device access control
  • Implement security features
  • BGP Generic TTL Security Mechanism
  • Flexible Packet Matching

[править] Implement Network Services

  • Implement Hot Standby Router Protocol (HSRP)
  • Implement Gateway Load Balancing Protocol (GLBP)
  • Implement Virtual Router Redundancy Protocol (VRRP)
  • Implement Network Time Protocol (NTP)
  • Implement DHCP
  • Implement Web Cache Communication Protocol (WCCP)

[править] Implement Quality of Service (QoS)

  • Implement Modular QoS CLI (MQC)
    • Network-Based Application Recognition (NBAR)
    • Class-based weighted fair queuing (CBWFQ), modified deficit round robin (MDRR), and low latency queuing (LLQ)
    • Classification
    • Policing
    • Shaping
    • Marking
    • Weighted random early detection (WRED) and random early detection (RED)
    • Compression
  • Implement Layer 2 QoS: weighted round robin (WRR), shaped round robin (SRR), and policies
  • Implement link fragmentation and interleaving (LFI) for Frame Relay
  • Implement generic traffic shaping
  • Implement Resource Reservation Protocol (RSVP)
  • Implement Cisco AutoQoS

[править] Troubleshoot a Network

  • Troubleshoot complex Layer 2 network issues
  • Troubleshoot complex Layer 3 network issues
  • Troubleshoot a network in response to application problems
  • Troubleshoot network services
  • Troubleshoot network security

[править] Optimize the Network

  • Implement syslog and local logging
  • Implement IP Service Level Agreement SLA
  • Implement NetFlow
  • Implement SPAN, RSPAN, and router IP traffic export (RITE)
  • Implement Simple Network Management Protocol (SNMP)
  • Implement Cisco IOS Embedded Event Manager (EEM)
  • Implement Remote Monitoring (RMON)
  • Implement FTP
  • Implement TFTP
  • Implement TFTP server on router
  • Implement Switch-module Configuration Protocol (SCP)
  • Implement HTTP and HTTPS
  • Implement Telnet
Источник — «http://871460.xgu.ru/wiki/CCIE_plan»