/l3/users/27-07-2009/nt-fbsdnet/fbsd6.net.nt/user :1 :2 :3 :4 :5 :6 :7 :8 :9 :10 :11 :12 :13 :14 :15 :16 :17 :18 :19 :20 :21 :22 :23 :24 :25 :26 :27 :28 :29 :30 :31 :32 :33 :34 :35 :36 :37 :38 :39 :40 :41 :42 :43 :44 :45 :46 :47 :48 :49 :50 :51 :52 :53 :54 :55 :56 :57 :58 :59 :60 :61 :62 :63 :64 :65
[ править ]

Журнал лабораторных работ

Содержание

Журнал

Пятница (07/31/09)

/dev/ttyp1
17:23:23
#ee /etc/rc.conf
/dev/ttyp3
17:23:23
#ee /etc/rc.conf
/dev/ttyp1
17:23:23
#ee /etc/rc.conf
/dev/ttyp6
17:23:52
$ssh user@192.168.16.7 
user@192.168.16.7's password:
Linux debiant 2.6.18-5-xen-686 #1 SMP Fri Jun 1 05:05:24 UTC 2007 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Jul 31 18:18:19 2009 from host202.net.nt
l3-agent is already running: pid=1260; pidfile=/home/user/.lilalo/l3-agent.pid
17:23:52
$ssh user@192.168.16.7
user@192.168.16.7's password:
Linux debiant 2.6.18-5-xen-686 #1 SMP Fri Jun 1 05:05:24 UTC 2007 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Fri Jul 31 18:18:19 2009 from host202.net.nt
l3-agent is already running: pid=1260; pidfile=/home/user/.lilalo/l3-agent.pid
/dev/ttyp3
17:31:56
#netstat restart 
Active Internet connections
Proto Recv-Q Send-Q  Local Address          Foreign Address        (state)
tcp4       0      0  fbsd6.50995            chub.in.18030          TIME_WAIT
tcp4       0      0  localhost.smtp         localhost.58821        TIME_WAIT
tcp4       0     48  fbsd6.ssh              fbsd6.51481            ESTABLISHED
tcp4       0      0  fbsd6.51481            fbsd6.ssh              ESTABLISHED
tcp4       0      0  fbsd6.vnc1             host202.1105           ESTABLISHED
Active UNIX domain sockets
Address  Type   Recv-Q Send-Q    Inode     Conn     Refs  Nextref Addr
c3d8a000 stream      0      0        0 c3a1e120        0        0
...
c3a1d630 stream      0      0        0 c3a1d6c0        0        0 /tmp/.X11-unix/X0
c3a1d6c0 stream      0      0        0 c3a1d630        0        0
c3a1d900 stream      0      0        0 c3a1d990        0        0 /tmp/.X11-unix/X0
c3a1d990 stream      0      0        0 c3a1d900        0        0
c3a1da20 stream      0      0 c3c36dd0        0        0        0 /tmp/.X11-unix/X0
c3a1e000 stream      0      0 c3a1b330        0        0        0 /var/run/devd.pipe
c3a1dab0 dgram       0      0        0 c3a1dd80        0        0
c3a1db40 dgram       0      0        0 c3a1dcf0        0        0
c3a1dcf0 dgram       0      0 c3bb6dd0        0 c3a1db40        0 /var/run/logpriv
c3a1dd80 dgram       0      0 c3bb9000        0 c3a1dab0        0 /var/run/log
/dev/ttyp1
17:31:56
#netstat restart 
Active Internet connections
Proto Recv-Q Send-Q  Local Address          Foreign Address        (state)
tcp4       0      0  fbsd6.50995            chub.in.18030          TIME_WAIT
tcp4       0      0  localhost.smtp         localhost.58821        TIME_WAIT
tcp4       0     48  fbsd6.ssh              fbsd6.51481            ESTABLISHED
tcp4       0      0  fbsd6.51481            fbsd6.ssh              ESTABLISHED
tcp4       0      0  fbsd6.vnc1             host202.1105           ESTABLISHED
Active UNIX domain sockets
Address  Type   Recv-Q Send-Q    Inode     Conn     Refs  Nextref Addr
c3d8a000 stream      0      0        0 c3a1e120        0        0
...
c3a1d630 stream      0      0        0 c3a1d6c0        0        0 /tmp/.X11-unix/X0
c3a1d6c0 stream      0      0        0 c3a1d630        0        0
c3a1d900 stream      0      0        0 c3a1d990        0        0 /tmp/.X11-unix/X0
c3a1d990 stream      0      0        0 c3a1d900        0        0
c3a1da20 stream      0      0 c3c36dd0        0        0        0 /tmp/.X11-unix/X0
c3a1e000 stream      0      0 c3a1b330        0        0        0 /var/run/devd.pipe
c3a1dab0 dgram       0      0        0 c3a1dd80        0        0
c3a1db40 dgram       0      0        0 c3a1dcf0        0        0
c3a1dcf0 dgram       0      0 c3bb6dd0        0 c3a1db40        0 /var/run/logpriv
c3a1dd80 dgram       0      0 c3bb9000        0 c3a1dab0        0 /var/run/log
/dev/ttyp3
17:31:56
#netstat restart 
Active Internet connections
Proto Recv-Q Send-Q  Local Address          Foreign Address        (state)
tcp4       0      0  fbsd6.50995            chub.in.18030          TIME_WAIT
tcp4       0      0  localhost.smtp         localhost.58821        TIME_WAIT
tcp4       0     48  fbsd6.ssh              fbsd6.51481            ESTABLISHED
tcp4       0      0  fbsd6.51481            fbsd6.ssh              ESTABLISHED
tcp4       0      0  fbsd6.vnc1             host202.1105           ESTABLISHED
Active UNIX domain sockets
Address  Type   Recv-Q Send-Q    Inode     Conn     Refs  Nextref Addr
c3d8a000 stream      0      0        0 c3a1e120        0        0
...
c3a1d630 stream      0      0        0 c3a1d6c0        0        0 /tmp/.X11-unix/X0
c3a1d6c0 stream      0      0        0 c3a1d630        0        0
c3a1d900 stream      0      0        0 c3a1d990        0        0 /tmp/.X11-unix/X0
c3a1d990 stream      0      0        0 c3a1d900        0        0
c3a1da20 stream      0      0 c3c36dd0        0        0        0 /tmp/.X11-unix/X0
c3a1e000 stream      0      0 c3a1b330        0        0        0 /var/run/devd.pipe
c3a1dab0 dgram       0      0        0 c3a1dd80        0        0
c3a1db40 dgram       0      0        0 c3a1dcf0        0        0
c3a1dcf0 dgram       0      0 c3bb6dd0        0 c3a1db40        0 /var/run/logpriv
c3a1dd80 dgram       0      0 c3bb9000        0 c3a1dab0        0 /var/run/log
/dev/ttyp1
17:31:56
#netstat restart
Active Internet connections
Proto Recv-Q Send-Q  Local Address          Foreign Address        (state)
tcp4       0      0  fbsd6.50995            chub.in.18030          TIME_WAIT
tcp4       0      0  localhost.smtp         localhost.58821        TIME_WAIT
tcp4       0     48  fbsd6.ssh              fbsd6.51481            ESTABLISHED
tcp4       0      0  fbsd6.51481            fbsd6.ssh              ESTABLISHED
tcp4       0      0  fbsd6.vnc1             host202.1105           ESTABLISHED
Active UNIX domain sockets
Address  Type   Recv-Q Send-Q    Inode     Conn     Refs  Nextref Addr
c3d8a000 stream      0      0        0 c3a1e120        0        0
...
c3a1d630 stream      0      0        0 c3a1d6c0        0        0 /tmp/.X11-unix/X0
c3a1d6c0 stream      0      0        0 c3a1d630        0        0
c3a1d900 stream      0      0        0 c3a1d990        0        0 /tmp/.X11-unix/X0
c3a1d990 stream      0      0        0 c3a1d900        0        0
c3a1da20 stream      0      0 c3c36dd0        0        0        0 /tmp/.X11-unix/X0
c3a1e000 stream      0      0 c3a1b330        0        0        0 /var/run/devd.pipe
c3a1dab0 dgram       0      0        0 c3a1dd80        0        0
c3a1db40 dgram       0      0        0 c3a1dcf0        0        0
c3a1dcf0 dgram       0      0 c3bb6dd0        0 c3a1db40        0 /var/run/logpriv
c3a1dd80 dgram       0      0 c3bb9000        0 c3a1dab0        0 /var/run/log
/dev/ttyp3
17:32:09
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp1
17:32:09
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:32:09
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp1
17:32:09
#ifconfig -a
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:32:16
#/etc/netstat restart 
bash: /etc/netstat: No such file or directory
/dev/ttyp1
17:32:16
#/etc/netstat restart 
bash: /etc/netstat: No such file or directory
/dev/ttyp3
17:32:16
#/etc/netstat restart 
bash: /etc/netstat: No such file or directory
/dev/ttyp1
17:32:16
#/etc/netstat restart 
bash: /etc/netstat: No such file or directory
/dev/ttyp3
17:32:47
#/etc/netstar restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:32:47
#/etc/netstar restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:32:47
#/etc/netstar restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:32:47
#/etc/netstar restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:32:47
#/etc/netstar restart
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
/dev/ttyp0
17:40:20
$su 
Password:
su: Sorry
17:40:20
$su 
Password:
su: Sorry
17:40:20
$su 
Password:
su: Sorry
17:40:20
$su 
Password:
su: Sorry
17:40:20
$su 
Password:
su: Sorry
17:40:31
$su 
Password:
su: Sorry
17:40:31
$su 
Password:
su: Sorry
17:40:31
$su 
Password:
su: Sorry
17:40:31
$su 
Password:
su: Sorry
17:40:31
$su 
Password:
su: Sorry
17:40:39
$su 
Password:
su: Sorry
17:40:39
$su 
Password:
su: Sorry
17:40:39
$su 
Password:
su: Sorry
17:40:39
$su 
Password:
su: Sorry
17:40:39
$su 
Password:
su: Sorry
17:40:46
$su 
Password:
17:40:46
$su 
Password:
17:40:46
$su 
Password:
17:40:46
$su 
Password:
17:40:46
$su
Password:
/dev/ttyp0
17:43:23
$su 
Password:
17:43:23
$su 
Password:
17:43:23
$su 
Password:
17:43:23
$su 
Password:
17:43:23
$su
Password:
/dev/ttyp0
17:45:33
$su 
Password:
17:45:33
$su 
Password:
17:45:33
$su 
Password:
17:45:33
$su 
Password:
17:45:33
$su
Password:
/dev/ttyp0
17:46:28
$su 
Password:
17:46:28
$su 
Password:
17:46:28
$su 
Password:
17:46:28
$su 
Password:
17:46:28
$su
Password:
17:46:36
#ee /etc/rc.conf
17:46:36
#ee /etc/rc.conf
17:46:36
#ee /etc/rc.conf
17:46:36
#ee /etc/rc.conf
17:46:36
#ee /etc/rc.conf
17:46:53
#ee /etc/rc.conf
17:46:53
#ee /etc/rc.conf
17:46:53
#ee /etc/rc.conf
17:46:53
#ee /etc/rc.conf
17:46:53
#ee /etc/rc.conf
17:46:53
#ee /etc/rc.conf
17:46:53
#ee /etc/rc.conf
17:46:53
#ee /etc/rc.conf
17:46:53
#ee /etc/rc.conf
17:49:11
#ee /etc/rc.conf
17:49:11
#ee /etc/rc.conf
17:49:11
#ee /etc/rc.conf
17:49:11
#ee /etc/rc.conf
17:49:11
#ee /etc/rc.conf
17:49:11
#ee /etc/rc.conf
17:49:11
#ee /etc/rc.conf
17:49:11
#ee /etc/rc.conf
17:49:11
#ee /etc/rc.conf
17:50:55
#/etc/netstart restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:50:55
#/etc/netstart restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:50:55
#/etc/netstart restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:50:55
#/etc/netstart restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:50:55
#/etc/netstart restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:50:55
#/etc/netstart restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:50:55
#/etc/netstart restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:50:55
#/etc/netstart restart 
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:50:55
#/etc/netstart restart
devd already running? (pid=703).
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
add net default: gateway 192.168.54.129
Additional routing options:.
17:51:02
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
17:51:02
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
17:51:02
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
17:51:02
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
17:51:02
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
17:51:02
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
17:51:02
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
17:51:02
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
17:51:02
#ifconfig -a
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:53:19
$ssh user@192.168.16.26 
Password:
Last login: Fri Jul 31 18:53:13 2009
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.
FreeBSD 6.3-RELEASE (SMP) #0: Wed Jan 16 04:45:45 UTC 2008
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o  Security advisories and updated errata information for all releases are
   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
   for your release first as it's updated frequently.
...
   http://www.FreeBSD.org/search/.  If the doc distribution has
   been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list.  If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page.  If you are not familiar with manual pages, type `man man'.
You may also use sysinstall(8) to re-enter the installation and
configuration utility.  Edit /etc/motd to change this login announcement.
Removing stale pidfile
17:53:19
$ssh user@192.168.16.26 
Password:
Last login: Fri Jul 31 18:53:13 2009
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.
FreeBSD 6.3-RELEASE (SMP) #0: Wed Jan 16 04:45:45 UTC 2008
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o  Security advisories and updated errata information for all releases are
   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
   for your release first as it's updated frequently.
...
   http://www.FreeBSD.org/search/.  If the doc distribution has
   been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list.  If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page.  If you are not familiar with manual pages, type `man man'.
You may also use sysinstall(8) to re-enter the installation and
configuration utility.  Edit /etc/motd to change this login announcement.
Removing stale pidfile
17:53:19
$ssh user@192.168.16.26
Password:
Last login: Fri Jul 31 18:53:13 2009
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.
FreeBSD 6.3-RELEASE (SMP) #0: Wed Jan 16 04:45:45 UTC 2008
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o  Security advisories and updated errata information for all releases are
   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
   for your release first as it's updated frequently.
...
   http://www.FreeBSD.org/search/.  If the doc distribution has
   been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list.  If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page.  If you are not familiar with manual pages, type `man man'.
You may also use sysinstall(8) to re-enter the installation and
configuration utility.  Edit /etc/motd to change this login announcement.
Removing stale pidfile

Статистика

Время первой команды журнала17:23:23 2009- 7-31
Время последней команды журнала17:53:19 2009- 7-31
Количество командных строк в журнале101
Процент команд с ненулевым кодом завершения, %14.85
Процент синтаксически неверно набранных команд, % 3.96
Суммарное время работы с терминалом *, час 0.50
Количество командных строк в единицу времени, команда/мин 3.37
Частота использования команд
su35|==================================| 34.65%
ee26|=========================| 25.74%
ifconfig13|============| 12.87%
/etc/netstart9|========| 8.91%
/etc/netstar5|====| 4.95%
ssh5|====| 4.95%
netstat4|===| 3.96%
/etc/netstat4|===| 3.96%
____
*) Интервалы неактивности длительностью 30 минут и более не учитываются

Справка

Для того чтобы использовать LiLaLo, не нужно знать ничего особенного: всё происходит само собой. Однако, чтобы ведение и последующее использование журналов было как можно более эффективным, желательно иметь в виду следующее:

  1. В журнал автоматически попадают все команды, данные в любом терминале системы.

  2. Для того чтобы убедиться, что журнал на текущем терминале ведётся, и команды записываются, дайте команду w. В поле WHAT, соответствующем текущему терминалу, должна быть указана программа script.

  3. Команды, при наборе которых были допущены синтаксические ошибки, выводятся перечёркнутым текстом: 
    $ l s-l
    bash: l: command not found

  4. Если код завершения команды равен нулю, команда была выполнена без ошибок. Команды, код завершения которых отличен от нуля, выделяются цветом. 
    $ test 5 -lt 4
    Обратите внимание на то, что код завершения команды может быть отличен от нуля не только в тех случаях, когда команда была выполнена с ошибкой. Многие команды используют код завершения, например, для того чтобы показать результаты проверки

  5. Команды, ход выполнения которых был прерван пользователем, выделяются цветом. 
    $ find / -name abc
    find: /home/devi-orig/.gnome2: Keine Berechtigung
find: /home/devi-orig/.gnome2_private: Keine Berechtigung
find: /home/devi-orig/.nautilus/metafiles: Keine Berechtigung
find: /home/devi-orig/.metacity: Keine Berechtigung
find: /home/devi-orig/.inkscape: Keine Berechtigung
^C

  6. Команды, выполненные с привилегиями суперпользователя, выделяются слева красной чертой. 
    # id
    uid=0(root) gid=0(root) Gruppen=0(root)

  7. Изменения, внесённые в текстовый файл с помощью редактора, запоминаются и показываются в журнале в формате ed. Строки, начинающиеся символом "<", удалены, а строки, начинающиеся символом ">" -- добавлены. 
    $ vi ~/.bashrc
    2a3,5
>    if [ -f /usr/local/etc/bash_completion ]; then
>         . /usr/local/etc/bash_completion
>        fi

  8. Для того чтобы изменить файл в соответствии с показанными в диффшоте изменениями, можно воспользоваться командой patch. Нужно скопировать изменения, запустить программу patch, указав в качестве её аргумента файл, к которому применяются изменения, и всавить скопированный текст: 
    $ patch ~/.bashrc
    В данном случае изменения применяются к файлу ~/.bashrc

  9. Для того чтобы получить краткую справочную информацию о команде, нужно подвести к ней мышь. Во всплывающей подсказке появится краткое описание команды.

    Если справочная информация о команде есть, команда выделяется голубым фоном, например: vi. Если справочная информация отсутствует, команда выделяется розовым фоном, например: notepad.exe. Справочная информация может отсутствовать в том случае, если (1) команда введена неверно; (2) если распознавание команды LiLaLo выполнено неверно; (3) если информация о команде неизвестна LiLaLo. Последнее возможно для редких команд.

  10. Большие, в особенности многострочные, всплывающие подсказки лучше всего показываются браузерами KDE Konqueror, Apple Safari и Microsoft Internet Explorer. В браузерах Mozilla и Firefox они отображаются не полностью, а вместо перевода строки выводится специальный символ.

  11. Время ввода команды, показанное в журнале, соответствует времени начала ввода командной строки, которое равно тому моменту, когда на терминале появилось приглашение интерпретатора

  12. Имя терминала, на котором была введена команда, показано в специальном блоке. Этот блок показывается только в том случае, если терминал текущей команды отличается от терминала предыдущей.

  13. Вывод не интересующих вас в настоящий момент элементов журнала, таких как время, имя терминала и других, можно отключить. Для этого нужно воспользоваться формой управления журналом вверху страницы.

  14. Небольшие комментарии к командам можно вставлять прямо из командной строки. Комментарий вводится прямо в командную строку, после символов #^ или #v. Символы ^ и v показывают направление выбора команды, к которой относится комментарий: ^ - к предыдущей, v - к следующей. Например, если в командной строке было введено: 

    $ whoami

    user

    $ #^ Интересно, кто я?
    в журнале это будет выглядеть так: 
    $ whoami

    user
    Интересно, кто я?

  15. Если комментарий содержит несколько строк, его можно вставить в журнал следующим образом: 

    $ whoami

    user

    $ cat > /dev/null #^ Интересно, кто я?

    Программа whoami выводит имя пользователя, под которым 
мы зарегистрировались в системе.
-
Она не может ответить на вопрос о нашем назначении 
в этом мире.
    В журнале это будет выглядеть так: 
    $ whoami
    user
    Интересно, кто я?
    Программа whoami выводит имя пользователя, под которым
    мы зарегистрировались в системе.

    Она не может ответить на вопрос о нашем назначении
    в этом мире.
    Для разделения нескольких абзацев между собой используйте символ "-", один в строке.

  16. Комментарии, не относящиеся непосредственно ни к какой из команд, добавляются точно таким же способом, только вместо симолов #^ или #v нужно использовать символы #=

  17. Содержимое файла может быть показано в журнале. Для этого его нужно вывести с помощью программы cat. Если вывод команды отметить симоволами #!, содержимое файла будет показано в журнале в специально отведённой для этого секции.

  18. Для того чтобы вставить скриншот интересующего вас окна в журнал, нужно воспользоваться командой l3shot. После того как команда вызвана, нужно с помощью мыши выбрать окно, которое должно быть в журнале.

  19. Команды в журнале расположены в хронологическом порядке. Если две команды давались одна за другой, но на разных терминалах, в журнале они будут рядом, даже если они не имеют друг к другу никакого отношения. 
    1
    2
3   
    4
    Группы команд, выполненных на разных терминалах, разделяются специальной линией. Под этой линией в правом углу показано имя терминала, на котором выполнялись команды. Для того чтобы посмотреть команды только одного сенса, нужно щёкнуть по этому названию.


О программе

LiLaLo (L3) расшифровывается как Live Lab Log.
Программа разработана для повышения эффективности обучения Unix/Linux-системам.
(c) Игорь Чубин, 2004-2008

$Id$