/l3/users/27-07-2009/nt-fbsdnet/fbsd6.net.nt/user :1 :2 :3 :4 :5 :6 :7 :8 :9 :10 :11 :12 :13 :14 :15 :16 :17 :18 :19 :20 :21 :22 :23 :24 :25 :26 :27 :28 :29 :30 :31 :32 :33 :34 :35 :36 :37 :38 :39 :40 :41 :42 :43 :44 :45 :46 :47 :48 :49 :50 :51 :52 :53 :54 :55 :56 :57 :58 :59 :60 :61 :62 :63 :64 :65
[ править ]

Журнал лабораторных работ

Содержание

Журнал

Пятница (07/31/09)

/dev/ttyp3
17:53:19
$ssh user@192.168.16.26 
Password:
Last login: Fri Jul 31 18:53:13 2009
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.
FreeBSD 6.3-RELEASE (SMP) #0: Wed Jan 16 04:45:45 UTC 2008
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o  Security advisories and updated errata information for all releases are
   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
   for your release first as it's updated frequently.
...
   http://www.FreeBSD.org/search/.  If the doc distribution has
   been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list.  If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page.  If you are not familiar with manual pages, type `man man'.
You may also use sysinstall(8) to re-enter the installation and
configuration utility.  Edit /etc/motd to change this login announcement.
Removing stale pidfile
17:53:19
$ssh user@192.168.16.26 
Password:
Last login: Fri Jul 31 18:53:13 2009
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.
FreeBSD 6.3-RELEASE (SMP) #0: Wed Jan 16 04:45:45 UTC 2008
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o  Security advisories and updated errata information for all releases are
   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
   for your release first as it's updated frequently.
...
   http://www.FreeBSD.org/search/.  If the doc distribution has
   been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list.  If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page.  If you are not familiar with manual pages, type `man man'.
You may also use sysinstall(8) to re-enter the installation and
configuration utility.  Edit /etc/motd to change this login announcement.
Removing stale pidfile
17:53:19
$ssh user@192.168.16.26 
Password:
Last login: Fri Jul 31 18:53:13 2009
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.
FreeBSD 6.3-RELEASE (SMP) #0: Wed Jan 16 04:45:45 UTC 2008
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o  Security advisories and updated errata information for all releases are
   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
   for your release first as it's updated frequently.
...
   http://www.FreeBSD.org/search/.  If the doc distribution has
   been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list.  If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page.  If you are not familiar with manual pages, type `man man'.
You may also use sysinstall(8) to re-enter the installation and
configuration utility.  Edit /etc/motd to change this login announcement.
Removing stale pidfile
17:53:19
$ssh user@192.168.16.26 
Password:
Last login: Fri Jul 31 18:53:13 2009
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.
FreeBSD 6.3-RELEASE (SMP) #0: Wed Jan 16 04:45:45 UTC 2008
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o  Security advisories and updated errata information for all releases are
   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
   for your release first as it's updated frequently.
...
   http://www.FreeBSD.org/search/.  If the doc distribution has
   been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list.  If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page.  If you are not familiar with manual pages, type `man man'.
You may also use sysinstall(8) to re-enter the installation and
configuration utility.  Edit /etc/motd to change this login announcement.
Removing stale pidfile
17:53:19
$ssh user@192.168.16.26 
Password:
Last login: Fri Jul 31 18:53:13 2009
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.
FreeBSD 6.3-RELEASE (SMP) #0: Wed Jan 16 04:45:45 UTC 2008
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o  Security advisories and updated errata information for all releases are
   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
   for your release first as it's updated frequently.
...
   http://www.FreeBSD.org/search/.  If the doc distribution has
   been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list.  If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page.  If you are not familiar with manual pages, type `man man'.
You may also use sysinstall(8) to re-enter the installation and
configuration utility.  Edit /etc/motd to change this login announcement.
Removing stale pidfile
17:53:19
$ssh user@192.168.16.26 
Password:
Last login: Fri Jul 31 18:53:13 2009
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.
FreeBSD 6.3-RELEASE (SMP) #0: Wed Jan 16 04:45:45 UTC 2008
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o  Security advisories and updated errata information for all releases are
   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
   for your release first as it's updated frequently.
...
   http://www.FreeBSD.org/search/.  If the doc distribution has
   been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list.  If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page.  If you are not familiar with manual pages, type `man man'.
You may also use sysinstall(8) to re-enter the installation and
configuration utility.  Edit /etc/motd to change this login announcement.
Removing stale pidfile
17:53:19
$ssh user@192.168.16.26
Password:
Last login: Fri Jul 31 18:53:13 2009
Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
        The Regents of the University of California.  All rights reserved.
FreeBSD 6.3-RELEASE (SMP) #0: Wed Jan 16 04:45:45 UTC 2008
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o  Security advisories and updated errata information for all releases are
   at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
   for your release first as it's updated frequently.
...
   http://www.FreeBSD.org/search/.  If the doc distribution has
   been installed, they're also available formatted in /usr/share/doc.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list.  If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page.  If you are not familiar with manual pages, type `man man'.
You may also use sysinstall(8) to re-enter the installation and
configuration utility.  Edit /etc/motd to change this login announcement.
Removing stale pidfile
/dev/ttyp5
17:53:44
$su 
Password:
/dev/ttyp3
17:53:44
$su 
Password:
/dev/ttyp5
17:53:44
$su 
Password:
/dev/ttyp3
17:53:44
$su 
Password:
/dev/ttyp5
17:53:44
$su 
Password:
/dev/ttyp3
17:53:44
$su 
Password:
/dev/ttyp5
17:53:44
$su 
Password:
/dev/ttyp3
17:53:44
$su 
Password:
/dev/ttyp5
17:53:44
$su 
Password:
/dev/ttyp3
17:53:44
$su 
Password:
/dev/ttyp5
17:53:44
$su 
Password:
/dev/ttyp3
17:53:44
$su 
Password:
/dev/ttyp5
17:53:44
$su 
Password:
/dev/ttyp3
17:53:44
$su 
Password:
/dev/ttyp5
17:53:44
$su 
Password:
/dev/ttyp3
17:53:44
$su 
Password:
/dev/ttyp5
17:53:44
$su 
Password:
/dev/ttyp3
17:53:44
$su
Password:
/dev/ttyp5
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp5
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp5
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp5
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp5
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp5
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp5
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp5
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp5
17:53:52
#ifconfig -a 
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp3
17:53:52
#ifconfig -a
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.16.26 netmask 0xffffff00 broadcast 192.168.16.255
        ether 00:16:4e:00:00:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        inet 192.168.54.158 netmask 0xffffffe0 broadcast 192.168.54.159
        ether 00:16:4e:00:01:06
...
re2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
        ether 00:16:4e:00:02:06
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
/dev/ttyp5
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp3
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp5
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp3
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp5
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp3
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp5
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp3
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp5
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp3
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp5
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp3
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp5
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp3
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp5
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp3
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp5
17:53:58
#sysctl -a 
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp3
17:53:58
#sysctl -a
dev.isab.0.%driver: isab
dev.isab.0.%location: slot=1 function=0 handle=\_SB_.PCI0.ISA_
dev.isab.0.%pnpinfo: vendor=0x8086 device=0x7000 subvendor=0x0000 subdevice=0x0000 class=0x060100
dev.isab.0.%parent: pci0
dev.isa.0.%desc: ISA bus
dev.isa.0.%driver: isa
dev.isa.0.%parent: isab0
dev.atapci.0.%desc: Intel PIIX3 WDMA2 controller
dev.atapci.0.%driver: atapci
dev.atapci.0.%location: slot=1 function=1
...
dev.ums.0.%driver: ums
dev.ums.0.%location: port=1 interface=0
dev.ums.0.%pnpinfo: vendor=0x0627 product=0x0001 devclass=0x00 devsubclass=0x00 release=0x0000 sernum="1" intclass=0x03 intsubclass=0x01
dev.ums.0.%parent: uhub0
dev.ad.0.%desc: QEMU HARDDISK/0.9.0
dev.ad.0.%driver: ad
dev.ad.0.%parent: ata0
dev.subdisk.0.%driver: subdisk
dev.subdisk.0.%parent: ad0
hptmv.status: RocketRAID 182x SATA Controller driver Version v1.12 (Jan 16 2008 04:43:08)
/dev/ttyp5
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp3
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp5
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp3
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp5
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp3
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp5
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp3
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp5
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp3
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp5
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp3
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp5
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp3
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp5
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp3
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp5
17:54:24
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp3
17:54:24
#sysctl -a | grep forward
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp5
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp3
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp5
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp3
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp5
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp3
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp5
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp3
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp5
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp3
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp5
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp3
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp5
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp3
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp5
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp3
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp5
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp3
17:54:39
#ee /etc/sysctl.conf
/dev/ttyp5
17:55:30
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp3
17:55:30
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp5
17:55:30
#sysctl -a | grep forward 
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0
/dev/ttyp3
17:55:30
#sysctl -a | grep forward
kern.smp.forward_signal_enabled: 1
kern.smp.forward_roundrobin_enabled: 1
net.inet.ip.forwarding: 0
net.inet.ip.fastforwarding: 0
net.inet6.ip6.forwarding: 0

Статистика

Время первой команды журнала17:53:19 2009- 7-31
Время последней команды журнала17:55:30 2009- 7-31
Количество командных строк в журнале101
Процент команд с ненулевым кодом завершения, % 0.00
Процент синтаксически неверно набранных команд, % 0.00
Суммарное время работы с терминалом *, час 0.04
Количество командных строк в единицу времени, команда/мин46.26
Частота использования команд
sysctl40|================================| 32.52%
grep22|=================| 17.89%
ee18|==============| 14.63%
ifconfig18|==============| 14.63%
su18|==============| 14.63%
ssh7|=====| 5.69%
____
*) Интервалы неактивности длительностью 30 минут и более не учитываются

Справка

Для того чтобы использовать LiLaLo, не нужно знать ничего особенного: всё происходит само собой. Однако, чтобы ведение и последующее использование журналов было как можно более эффективным, желательно иметь в виду следующее:

  1. В журнал автоматически попадают все команды, данные в любом терминале системы.

  2. Для того чтобы убедиться, что журнал на текущем терминале ведётся, и команды записываются, дайте команду w. В поле WHAT, соответствующем текущему терминалу, должна быть указана программа script.

  3. Команды, при наборе которых были допущены синтаксические ошибки, выводятся перечёркнутым текстом: 
    $ l s-l
    bash: l: command not found

  4. Если код завершения команды равен нулю, команда была выполнена без ошибок. Команды, код завершения которых отличен от нуля, выделяются цветом. 
    $ test 5 -lt 4
    Обратите внимание на то, что код завершения команды может быть отличен от нуля не только в тех случаях, когда команда была выполнена с ошибкой. Многие команды используют код завершения, например, для того чтобы показать результаты проверки

  5. Команды, ход выполнения которых был прерван пользователем, выделяются цветом. 
    $ find / -name abc
    find: /home/devi-orig/.gnome2: Keine Berechtigung
find: /home/devi-orig/.gnome2_private: Keine Berechtigung
find: /home/devi-orig/.nautilus/metafiles: Keine Berechtigung
find: /home/devi-orig/.metacity: Keine Berechtigung
find: /home/devi-orig/.inkscape: Keine Berechtigung
^C

  6. Команды, выполненные с привилегиями суперпользователя, выделяются слева красной чертой. 
    # id
    uid=0(root) gid=0(root) Gruppen=0(root)

  7. Изменения, внесённые в текстовый файл с помощью редактора, запоминаются и показываются в журнале в формате ed. Строки, начинающиеся символом "<", удалены, а строки, начинающиеся символом ">" -- добавлены. 
    $ vi ~/.bashrc
    2a3,5
>    if [ -f /usr/local/etc/bash_completion ]; then
>         . /usr/local/etc/bash_completion
>        fi

  8. Для того чтобы изменить файл в соответствии с показанными в диффшоте изменениями, можно воспользоваться командой patch. Нужно скопировать изменения, запустить программу patch, указав в качестве её аргумента файл, к которому применяются изменения, и всавить скопированный текст: 
    $ patch ~/.bashrc
    В данном случае изменения применяются к файлу ~/.bashrc

  9. Для того чтобы получить краткую справочную информацию о команде, нужно подвести к ней мышь. Во всплывающей подсказке появится краткое описание команды.

    Если справочная информация о команде есть, команда выделяется голубым фоном, например: vi. Если справочная информация отсутствует, команда выделяется розовым фоном, например: notepad.exe. Справочная информация может отсутствовать в том случае, если (1) команда введена неверно; (2) если распознавание команды LiLaLo выполнено неверно; (3) если информация о команде неизвестна LiLaLo. Последнее возможно для редких команд.

  10. Большие, в особенности многострочные, всплывающие подсказки лучше всего показываются браузерами KDE Konqueror, Apple Safari и Microsoft Internet Explorer. В браузерах Mozilla и Firefox они отображаются не полностью, а вместо перевода строки выводится специальный символ.

  11. Время ввода команды, показанное в журнале, соответствует времени начала ввода командной строки, которое равно тому моменту, когда на терминале появилось приглашение интерпретатора

  12. Имя терминала, на котором была введена команда, показано в специальном блоке. Этот блок показывается только в том случае, если терминал текущей команды отличается от терминала предыдущей.

  13. Вывод не интересующих вас в настоящий момент элементов журнала, таких как время, имя терминала и других, можно отключить. Для этого нужно воспользоваться формой управления журналом вверху страницы.

  14. Небольшие комментарии к командам можно вставлять прямо из командной строки. Комментарий вводится прямо в командную строку, после символов #^ или #v. Символы ^ и v показывают направление выбора команды, к которой относится комментарий: ^ - к предыдущей, v - к следующей. Например, если в командной строке было введено: 

    $ whoami

    user

    $ #^ Интересно, кто я?
    в журнале это будет выглядеть так: 
    $ whoami

    user
    Интересно, кто я?

  15. Если комментарий содержит несколько строк, его можно вставить в журнал следующим образом: 

    $ whoami

    user

    $ cat > /dev/null #^ Интересно, кто я?

    Программа whoami выводит имя пользователя, под которым 
мы зарегистрировались в системе.
-
Она не может ответить на вопрос о нашем назначении 
в этом мире.
    В журнале это будет выглядеть так: 
    $ whoami
    user
    Интересно, кто я?
    Программа whoami выводит имя пользователя, под которым
    мы зарегистрировались в системе.

    Она не может ответить на вопрос о нашем назначении
    в этом мире.
    Для разделения нескольких абзацев между собой используйте символ "-", один в строке.

  16. Комментарии, не относящиеся непосредственно ни к какой из команд, добавляются точно таким же способом, только вместо симолов #^ или #v нужно использовать символы #=

  17. Содержимое файла может быть показано в журнале. Для этого его нужно вывести с помощью программы cat. Если вывод команды отметить симоволами #!, содержимое файла будет показано в журнале в специально отведённой для этого секции.

  18. Для того чтобы вставить скриншот интересующего вас окна в журнал, нужно воспользоваться командой l3shot. После того как команда вызвана, нужно с помощью мыши выбрать окно, которое должно быть в журнале.

  19. Команды в журнале расположены в хронологическом порядке. Если две команды давались одна за другой, но на разных терминалах, в журнале они будут рядом, даже если они не имеют друг к другу никакого отношения. 
    1
    2
3   
    4
    Группы команд, выполненных на разных терминалах, разделяются специальной линией. Под этой линией в правом углу показано имя терминала, на котором выполнялись команды. Для того чтобы посмотреть команды только одного сенса, нужно щёкнуть по этому названию.


О программе

LiLaLo (L3) расшифровывается как Live Lab Log.
Программа разработана для повышения эффективности обучения Unix/Linux-системам.
(c) Игорь Чубин, 2004-2008

$Id$