/l3/users/max-public/nt-scale/debian3.unix.nt/root :1 :2 :3 :4 :5 :6 :7 :8 :9 :10 :11 :12 :13 :14 :15 :16 :17 :18 :19 :20 :21 :22 :23 :24 :25
[ править ]

Журнал лабораторных работ

Содержание

Журнал

Вторник (02/21/12)

/dev/pts/2
16:41:35
#reboot 










/dev/pts/1
16:41:35




#reboot












/dev/pts/1
16:50:22




#ifconfig





eth0      Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:10.0.35.43  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::207:e9ff:fe0c:4511/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4434 errors:0 dropped:0 overruns:0 frame:0
          TX packets:672 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1045022 (1020.5 KiB)  TX bytes:80486 (78.5 KiB)
eth0.10   Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:192.168.10.3  Bcast:192.168.10.255  Mask:255.255.255.0
...
          collisions:0 txqueuelen:0
          RX bytes:1627 (1.5 KiB)  TX bytes:6162 (6.0 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:800 (800.0 B)  TX bytes:800 (800.0 B)











/dev/pts/2
16:50:22




#ifconfig


eth0      Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:10.0.35.43  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::207:e9ff:fe0c:4511/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4434 errors:0 dropped:0 overruns:0 frame:0
          TX packets:672 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1045022 (1020.5 KiB)  TX bytes:80486 (78.5 KiB)
eth0.10   Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:192.168.10.3  Bcast:192.168.10.255  Mask:255.255.255.0
...
          collisions:0 txqueuelen:0
          RX bytes:1627 (1.5 KiB)  TX bytes:6162 (6.0 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:800 (800.0 B)  TX bytes:800 (800.0 B)











/dev/pts/1
16:50:26




#ifconfig | less













/dev/pts/2
16:50:26




#ifconfig | less










/dev/pts/1
16:50:40




#init 0















/dev/pts/2
16:50:40




#init 0










Среда (02/22/12)


/dev/pts/1
08:47:39




#ping google.com





^C











/dev/pts/2
08:47:39




#ping google.com





^C











/dev/pts/1
08:47:54




#ifconfig





eth0      Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:10.0.35.43  Bcast:10.0.35.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
eth0.10   Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:192.168.10.3  Bcast:192.168.10.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
...
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:203 errors:0 dropped:0 overruns:0 frame:0
          TX packets:203 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:18421 (17.9 KiB)  TX bytes:18421 (17.9 KiB)











/dev/pts/2
08:47:54




#ifconfig


eth0      Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:10.0.35.43  Bcast:10.0.35.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
eth0.10   Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:192.168.10.3  Bcast:192.168.10.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
...
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:203 errors:0 dropped:0 overruns:0 frame:0
          TX packets:203 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:18421 (17.9 KiB)  TX bytes:18421 (17.9 KiB)











/dev/pts/1
08:47:56




#ping 10.0.35.1





PING 10.0.35.1 (10.0.35.1) 56(84) bytes of data.
From 10.0.35.43 icmp_seq=1 Destination Host Unreachable
From 10.0.35.43 icmp_seq=2 Destination Host Unreachable
From 10.0.35.43 icmp_seq=3 Destination Host Unreachable
From 10.0.35.43 icmp_seq=5 Destination Host Unreachable
From 10.0.35.43 icmp_seq=6 Destination Host Unreachable
From 10.0.35.43 icmp_seq=7 Destination Host Unreachable
From 10.0.35.43 icmp_seq=8 Destination Host Unreachable
From 10.0.35.43 icmp_seq=9 Destination Host Unreachable
From 10.0.35.43 icmp_seq=11 Destination Host Unreachable
...
From 10.0.35.43 icmp_seq=21 Destination Host Unreachable
From 10.0.35.43 icmp_seq=22 Destination Host Unreachable
From 10.0.35.43 icmp_seq=23 Destination Host Unreachable
From 10.0.35.43 icmp_seq=24 Destination Host Unreachable
From 10.0.35.43 icmp_seq=26 Destination Host Unreachable
From 10.0.35.43 icmp_seq=27 Destination Host Unreachable
^C
--- 10.0.35.1 ping statistics ---
28 packets transmitted, 0 received, +24 errors, 100% packet loss, time 27125ms
pipe 3











/dev/pts/2
08:47:56




#ping 10.0.35.1





PING 10.0.35.1 (10.0.35.1) 56(84) bytes of data.
From 10.0.35.43 icmp_seq=1 Destination Host Unreachable
From 10.0.35.43 icmp_seq=2 Destination Host Unreachable
From 10.0.35.43 icmp_seq=3 Destination Host Unreachable
From 10.0.35.43 icmp_seq=5 Destination Host Unreachable
From 10.0.35.43 icmp_seq=6 Destination Host Unreachable
From 10.0.35.43 icmp_seq=7 Destination Host Unreachable
From 10.0.35.43 icmp_seq=8 Destination Host Unreachable
From 10.0.35.43 icmp_seq=9 Destination Host Unreachable
From 10.0.35.43 icmp_seq=11 Destination Host Unreachable
...
From 10.0.35.43 icmp_seq=21 Destination Host Unreachable
From 10.0.35.43 icmp_seq=22 Destination Host Unreachable
From 10.0.35.43 icmp_seq=23 Destination Host Unreachable
From 10.0.35.43 icmp_seq=24 Destination Host Unreachable
From 10.0.35.43 icmp_seq=26 Destination Host Unreachable
From 10.0.35.43 icmp_seq=27 Destination Host Unreachable
^C
--- 10.0.35.1 ping statistics ---
28 packets transmitted, 0 received, +24 errors, 100% packet loss, time 27125ms
pipe 3











/dev/pts/1
08:48:43




#mii-tool





eth0: negotiated 100baseTx-FD, link ok
SIOCGMIIREG on eth1 failed: Input/output error
SIOCGMIIREG on eth1 failed: Input/output error
eth1: negotiated 100baseTx-FD, link ok











/dev/pts/2
08:48:43




#mii-tool


eth0: negotiated 100baseTx-FD, link ok
SIOCGMIIREG on eth1 failed: Input/output error
SIOCGMIIREG on eth1 failed: Input/output error
eth1: negotiated 100baseTx-FD, link ok











/dev/pts/1
08:49:18




#/etc/init.d//networking restart





Running /etc/init.d//networking restart is deprecated because it may not enable again some interfaces ... (warning).
Reconfiguring network interfaces...Removed VLAN -:eth0.10:-
Removed VLAN -:eth0.20:-
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 10 to IF -:eth0:-
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 20 to IF -:eth0:-
done.











/dev/pts/2
08:49:18




#/etc/init.d//networking restart


Running /etc/init.d//networking restart is deprecated because it may not enable again some interfaces ... (warning).
Reconfiguring network interfaces...Removed VLAN -:eth0.10:-
Removed VLAN -:eth0.20:-
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 10 to IF -:eth0:-
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 20 to IF -:eth0:-
done.











/dev/pts/1
08:49:30




#ping 10.0.35.1





PING 10.0.35.1 (10.0.35.1) 56(84) bytes of data.
64 bytes from 10.0.35.1: icmp_req=1 ttl=64 time=0.279 ms
64 bytes from 10.0.35.1: icmp_req=2 ttl=64 time=0.402 ms
64 bytes from 10.0.35.1: icmp_req=3 ttl=64 time=0.274 ms
^C
--- 10.0.35.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1998ms
rtt min/avg/max/mdev = 0.274/0.318/0.402/0.060 ms











/dev/pts/2
08:49:30




#ping 10.0.35.1


PING 10.0.35.1 (10.0.35.1) 56(84) bytes of data.
64 bytes from 10.0.35.1: icmp_req=1 ttl=64 time=0.279 ms
64 bytes from 10.0.35.1: icmp_req=2 ttl=64 time=0.402 ms
64 bytes from 10.0.35.1: icmp_req=3 ttl=64 time=0.274 ms
^C
--- 10.0.35.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1998ms
rtt min/avg/max/mdev = 0.274/0.318/0.402/0.060 ms











/dev/pts/1
08:49:52




#ping google.com





connect: Network is unreachable











/dev/pts/2
08:49:52




#ping google.com





connect: Network is unreachable











/dev/pts/1
08:49:55




#host





Usage: host [-aCdlriTwv] [-c class] [-N ndots] [-t type] [-W time]
            [-R number] [-m flag] hostname [server]
       -a is equivalent to -v -t ANY
       -c specifies query class for non-IN data
       -C compares SOA records on authoritative nameservers
       -d is equivalent to -v
       -l lists all hosts in a domain, using AXFR
       -i IP6.INT reverse lookups
       -N changes the number of dots allowed before root lookup is done
       -r disables recursive processing
       -R specifies number of retries for UDP packets
       -s a SERVFAIL response should stop query
       -t specifies the query type
       -T enables TCP/IP mode
       -v enables verbose output
       -w specifies to wait forever for a reply
       -W specifies how long to wait for a reply
       -4 use IPv4 query transport only
       -6 use IPv6 query transport only
       -m set memory debugging flag (trace|record|usage)











/dev/pts/2
08:49:55




#host





Usage: host [-aCdlriTwv] [-c class] [-N ndots] [-t type] [-W time]
            [-R number] [-m flag] hostname [server]
       -a is equivalent to -v -t ANY
       -c specifies query class for non-IN data
       -C compares SOA records on authoritative nameservers
       -d is equivalent to -v
       -l lists all hosts in a domain, using AXFR
       -i IP6.INT reverse lookups
       -N changes the number of dots allowed before root lookup is done
       -r disables recursive processing
       -R specifies number of retries for UDP packets
       -s a SERVFAIL response should stop query
       -t specifies the query type
       -T enables TCP/IP mode
       -v enables verbose output
       -w specifies to wait forever for a reply
       -W specifies how long to wait for a reply
       -4 use IPv4 query transport only
       -6 use IPv6 query transport only
       -m set memory debugging flag (trace|record|usage)











/dev/pts/1
08:50:02




#nslookup





> google.com
Server:         10.0.35.1
Address:        10.0.35.1#53
Non-authoritative answer:
Name:   google.com
Address: 173.194.70.101
Name:   google.com
Address: 173.194.70.102
Name:   google.com
Address: 173.194.70.113
Name:   google.com
Address: 173.194.70.138
Name:   google.com
Address: 173.194.70.139
Name:   google.com
Address: 173.194.70.100
> exit











/dev/pts/2
08:50:02




#nslookup


> google.com
Server:         10.0.35.1
Address:        10.0.35.1#53
Non-authoritative answer:
Name:   google.com
Address: 173.194.70.101
Name:   google.com
Address: 173.194.70.102
Name:   google.com
Address: 173.194.70.113
Name:   google.com
Address: 173.194.70.138
Name:   google.com
Address: 173.194.70.139
Name:   google.com
Address: 173.194.70.100
> exit











/dev/pts/1
08:50:16




#ping google.com





connect: Network is unreachable











/dev/pts/2
08:50:16




#ping google.com





connect: Network is unreachable











/dev/pts/1
08:50:19




#route -n





Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
10.0.35.0       0.0.0.0         255.255.255.0   U     0      0        0 eth0
192.168.10.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0.10
192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0.20











/dev/pts/2
08:50:19




#route -n


Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
10.0.35.0       0.0.0.0         255.255.255.0   U     0      0        0 eth0
192.168.10.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0.10
192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0.20











/dev/pts/1
08:50:28




#ip route add default gateway 10.0.35.1





Error: either "to" is duplicate, or "gateway" is a garbage.











/dev/pts/2
08:50:28




#ip route add default gateway 10.0.35.1





Error: either "to" is duplicate, or "gateway" is a garbage.











/dev/pts/1
08:51:01




#ip route change default via 10.0.35.1





RTNETLINK answers: No such file or directory











/dev/pts/2
08:51:01




#ip route change default via 10.0.35.1





RTNETLINK answers: No such file or directory











/dev/pts/1
08:51:49




#mii-tool





eth0: negotiated 100baseTx-FD, link ok
SIOCGMIIREG on eth1 failed: Input/output error
SIOCGMIIREG on eth1 failed: Input/output error
eth1: negotiated 100baseTx-FD, link ok











/dev/pts/2
08:51:49




#mii-tool


eth0: negotiated 100baseTx-FD, link ok
SIOCGMIIREG on eth1 failed: Input/output error
SIOCGMIIREG on eth1 failed: Input/output error
eth1: negotiated 100baseTx-FD, link ok











/dev/pts/1
08:52:04




#ip route change default via 10.0.35.1





RTNETLINK answers: No such file or directory











/dev/pts/2
08:52:04




#ip route change default via 10.0.35.1





RTNETLINK answers: No such file or directory











/dev/pts/1
08:52:15




#route add





Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If]
       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]
                              [netmask N] [mss Mss] [window W] [irtt I]
                              [mod] [dyn] [reinstate] [[dev] If]
       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject
       inet_route [-FC] flush      NOT supported











/dev/pts/2
08:52:15




#route add





Usage: inet_route [-vF] del {-host|-net} Target[/prefix] [gw Gw] [metric M] [[dev] If]
       inet_route [-vF] add {-host|-net} Target[/prefix] [gw Gw] [metric M]
                              [netmask N] [mss Mss] [window W] [irtt I]
                              [mod] [dyn] [reinstate] [[dev] If]
       inet_route [-vF] add {-host|-net} Target[/prefix] [metric M] reject
       inet_route [-FC] flush      NOT supported











/dev/pts/1
08:53:14




#route add -net 0.0.0.0 gw 10.0.35.1















/dev/pts/2
08:53:14




#route add -net 0.0.0.0 gw 10.0.35.1












/dev/pts/1
08:53:32




#route -n





Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.0.35.1       0.0.0.0         UG    0      0        0 eth0
10.0.35.0       0.0.0.0         255.255.255.0   U     0      0        0 eth0
192.168.10.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0.10
192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0.20











/dev/pts/2
08:53:32




#route -n


Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.0.35.1       0.0.0.0         UG    0      0        0 eth0
10.0.35.0       0.0.0.0         255.255.255.0   U     0      0        0 eth0
192.168.10.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0.10
192.168.20.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0.20











/dev/pts/1
08:53:36




#ping 10.0.35.1





PING 10.0.35.1 (10.0.35.1) 56(84) bytes of data.
64 bytes from 10.0.35.1: icmp_req=1 ttl=64 time=0.328 ms
64 bytes from 10.0.35.1: icmp_req=2 ttl=64 time=0.341 ms
^C64 bytes from 10.0.35.1: icmp_req=3 ttl=64 time=0.204 ms
64 bytes from 10.0.35.1: icmp_req=4 ttl=64 time=0.333 ms
64 bytes from 10.0.35.1: icmp_req=5 ttl=64 time=0.204 ms
^C
--- 10.0.35.1 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.204/0.282/0.341/0.063 ms











/dev/pts/2
08:53:36




#ping 10.0.35.1


PING 10.0.35.1 (10.0.35.1) 56(84) bytes of data.
64 bytes from 10.0.35.1: icmp_req=1 ttl=64 time=0.328 ms
64 bytes from 10.0.35.1: icmp_req=2 ttl=64 time=0.341 ms
^C64 bytes from 10.0.35.1: icmp_req=3 ttl=64 time=0.204 ms
64 bytes from 10.0.35.1: icmp_req=4 ttl=64 time=0.333 ms
64 bytes from 10.0.35.1: icmp_req=5 ttl=64 time=0.204 ms
^C
--- 10.0.35.1 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.204/0.282/0.341/0.063 ms











/dev/pts/1
08:53:50




#ping google.com





PING google.com (173.194.70.139) 56(84) bytes of data.
64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_req=1 ttl=50 time=38.6 ms
64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_req=2 ttl=50 time=38.5 ms
64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_req=3 ttl=50 time=38.5 ms
64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_req=4 ttl=50 time=38.5 ms
64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_req=5 ttl=50 time=38.5 ms
^C
--- google.com ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4004ms
rtt min/avg/max/mdev = 38.589/38.598/38.607/0.124 ms











/dev/pts/2
08:53:50




#ping google.com


PING google.com (173.194.70.139) 56(84) bytes of data.
64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_req=1 ttl=50 time=38.6 ms
64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_req=2 ttl=50 time=38.5 ms
64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_req=3 ttl=50 time=38.5 ms
64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_req=4 ttl=50 time=38.5 ms
64 bytes from fa-in-f139.1e100.net (173.194.70.139): icmp_req=5 ttl=50 time=38.5 ms
^C
--- google.com ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4004ms
rtt min/avg/max/mdev = 38.589/38.598/38.607/0.124 ms











08:53:57




#ifconfig





eth0      Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:10.0.35.43  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::207:e9ff:fe0c:4511/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9336 errors:0 dropped:0 overruns:0 frame:0
          TX packets:775 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:906277 (885.0 KiB)  TX bytes:74187 (72.4 KiB)
eth0.10   Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:192.168.10.3  Bcast:192.168.10.255  Mask:255.255.255.0
...
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:5043 (4.9 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:239 errors:0 dropped:0 overruns:0 frame:0
          TX packets:239 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:22131 (21.6 KiB)  TX bytes:22131 (21.6 KiB)











/dev/pts/1
08:53:57




#ifconfig


eth0      Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:10.0.35.43  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::207:e9ff:fe0c:4511/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9336 errors:0 dropped:0 overruns:0 frame:0
          TX packets:775 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:906277 (885.0 KiB)  TX bytes:74187 (72.4 KiB)
eth0.10   Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:192.168.10.3  Bcast:192.168.10.255  Mask:255.255.255.0
...
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:5043 (4.9 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:239 errors:0 dropped:0 overruns:0 frame:0
          TX packets:239 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:22131 (21.6 KiB)  TX bytes:22131 (21.6 KiB)











08:56:16




#ping 192.168.10.2





PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
From 192.168.10.3 icmp_seq=1 Destination Host Unreachable
From 192.168.10.3 icmp_seq=2 Destination Host Unreachable
From 192.168.10.3 icmp_seq=3 Destination Host Unreachable
^C
--- 192.168.10.2 ping statistics ---
6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5032ms
pipe 3











/dev/pts/2
08:56:16




#ping 192.168.10.2





PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
From 192.168.10.3 icmp_seq=1 Destination Host Unreachable
From 192.168.10.3 icmp_seq=2 Destination Host Unreachable
From 192.168.10.3 icmp_seq=3 Destination Host Unreachable
^C
--- 192.168.10.2 ping statistics ---
6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5032ms
pipe 3











/dev/pts/1
08:56:30




#ping 192.168.10.4





PING 192.168.10.4 (192.168.10.4) 56(84) bytes of data.
64 bytes from 192.168.10.4: icmp_req=1 ttl=64 time=4.49 ms
64 bytes from 192.168.10.4: icmp_req=2 ttl=64 time=0.315 ms
64 bytes from 192.168.10.4: icmp_req=3 ttl=64 time=0.434 ms
64 bytes from 192.168.10.4: icmp_req=4 ttl=64 time=0.548 ms
64 bytes from 192.168.10.4: icmp_req=5 ttl=64 time=0.430 ms
^C
--- 192.168.10.4 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.315/1.243/4.491/1.625 ms











/dev/pts/2
08:56:30




#ping 192.168.10.4


PING 192.168.10.4 (192.168.10.4) 56(84) bytes of data.
64 bytes from 192.168.10.4: icmp_req=1 ttl=64 time=4.49 ms
64 bytes from 192.168.10.4: icmp_req=2 ttl=64 time=0.315 ms
64 bytes from 192.168.10.4: icmp_req=3 ttl=64 time=0.434 ms
64 bytes from 192.168.10.4: icmp_req=4 ttl=64 time=0.548 ms
64 bytes from 192.168.10.4: icmp_req=5 ttl=64 time=0.430 ms
^C
--- 192.168.10.4 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 3999ms
rtt min/avg/max/mdev = 0.315/1.243/4.491/1.625 ms











/dev/pts/1
08:56:36




#ping 192.168.20.4





PING 192.168.20.4 (192.168.20.4) 56(84) bytes of data.
64 bytes from 192.168.20.4: icmp_req=1 ttl=64 time=3.71 ms
64 bytes from 192.168.20.4: icmp_req=2 ttl=64 time=0.316 ms
64 bytes from 192.168.20.4: icmp_req=3 ttl=64 time=0.436 ms
^C
--- 192.168.20.4 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.316/1.489/3.716/1.575 ms











/dev/pts/2
08:56:36




#ping 192.168.20.4


PING 192.168.20.4 (192.168.20.4) 56(84) bytes of data.
64 bytes from 192.168.20.4: icmp_req=1 ttl=64 time=3.71 ms
64 bytes from 192.168.20.4: icmp_req=2 ttl=64 time=0.316 ms
64 bytes from 192.168.20.4: icmp_req=3 ttl=64 time=0.436 ms
^C
--- 192.168.20.4 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.316/1.489/3.716/1.575 ms











/dev/pts/1
08:56:41




#ping 192.168.10.2





PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
From 192.168.10.3 icmp_seq=1 Destination Host Unreachable
From 192.168.10.3 icmp_seq=2 Destination Host Unreachable
From 192.168.10.3 icmp_seq=3 Destination Host Unreachable
From 192.168.10.3 icmp_seq=4 Destination Host Unreachable
From 192.168.10.3 icmp_seq=5 Destination Host Unreachable
From 192.168.10.3 icmp_seq=6 Destination Host Unreachable
From 192.168.10.3 icmp_seq=7 Destination Host Unreachable
From 192.168.10.3 icmp_seq=8 Destination Host Unreachable
From 192.168.10.3 icmp_seq=9 Destination Host Unreachable
^C
--- 192.168.10.2 ping statistics ---
12 packets transmitted, 0 received, +9 errors, 100% packet loss, time 11065ms
pipe 3











/dev/pts/2
08:56:41




#ping 192.168.10.2





PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
From 192.168.10.3 icmp_seq=1 Destination Host Unreachable
From 192.168.10.3 icmp_seq=2 Destination Host Unreachable
From 192.168.10.3 icmp_seq=3 Destination Host Unreachable
From 192.168.10.3 icmp_seq=4 Destination Host Unreachable
From 192.168.10.3 icmp_seq=5 Destination Host Unreachable
From 192.168.10.3 icmp_seq=6 Destination Host Unreachable
From 192.168.10.3 icmp_seq=7 Destination Host Unreachable
From 192.168.10.3 icmp_seq=8 Destination Host Unreachable
From 192.168.10.3 icmp_seq=9 Destination Host Unreachable
^C
--- 192.168.10.2 ping statistics ---
12 packets transmitted, 0 received, +9 errors, 100% packet loss, time 11065ms
pipe 3











/dev/pts/1
08:56:57




#ping 192.168.10.1





PING 192.168.10.1 (192.168.10.1) 56(84) bytes of data.
64 bytes from 192.168.10.1: icmp_req=1 ttl=64 time=4.95 ms
64 bytes from 192.168.10.1: icmp_req=2 ttl=64 time=0.555 ms
64 bytes from 192.168.10.1: icmp_req=3 ttl=64 time=0.426 ms
^C
--- 192.168.10.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.426/1.979/4.958/2.107 ms











/dev/pts/2
08:56:57




#ping 192.168.10.1


PING 192.168.10.1 (192.168.10.1) 56(84) bytes of data.
64 bytes from 192.168.10.1: icmp_req=1 ttl=64 time=4.95 ms
64 bytes from 192.168.10.1: icmp_req=2 ttl=64 time=0.555 ms
64 bytes from 192.168.10.1: icmp_req=3 ttl=64 time=0.426 ms
^C
--- 192.168.10.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.426/1.979/4.958/2.107 ms











/dev/pts/1
08:57:13




#ping 192.168.20.2





PING 192.168.20.2 (192.168.20.2) 56(84) bytes of data.
64 bytes from 192.168.20.2: icmp_req=1 ttl=64 time=4.29 ms
64 bytes from 192.168.20.2: icmp_req=2 ttl=64 time=0.315 ms
64 bytes from 192.168.20.2: icmp_req=3 ttl=64 time=0.441 ms
64 bytes from 192.168.20.2: icmp_req=4 ttl=64 time=0.500 ms
64 bytes from 192.168.20.2: icmp_req=5 ttl=64 time=0.394 ms
64 bytes from 192.168.20.2: icmp_req=6 ttl=64 time=0.481 ms
64 bytes from 192.168.20.2: icmp_req=7 ttl=64 time=0.380 ms
^C
--- 192.168.20.2 ping statistics ---
7 packets transmitted, 7 received, 0% packet loss, time 5999ms
rtt min/avg/max/mdev = 0.315/0.972/4.295/1.357 ms











/dev/pts/2
08:57:13




#ping 192.168.20.2


PING 192.168.20.2 (192.168.20.2) 56(84) bytes of data.
64 bytes from 192.168.20.2: icmp_req=1 ttl=64 time=4.29 ms
64 bytes from 192.168.20.2: icmp_req=2 ttl=64 time=0.315 ms
64 bytes from 192.168.20.2: icmp_req=3 ttl=64 time=0.441 ms
64 bytes from 192.168.20.2: icmp_req=4 ttl=64 time=0.500 ms
64 bytes from 192.168.20.2: icmp_req=5 ttl=64 time=0.394 ms
64 bytes from 192.168.20.2: icmp_req=6 ttl=64 time=0.481 ms
64 bytes from 192.168.20.2: icmp_req=7 ttl=64 time=0.380 ms
^C
--- 192.168.20.2 ping statistics ---
7 packets transmitted, 7 received, 0% packet loss, time 5999ms
rtt min/avg/max/mdev = 0.315/0.972/4.295/1.357 ms











/dev/pts/1
08:57:24




#ping 192.168.20.5





PING 192.168.20.5 (192.168.20.5) 56(84) bytes of data.
64 bytes from 192.168.20.5: icmp_req=1 ttl=64 time=3.73 ms
64 bytes from 192.168.20.5: icmp_req=2 ttl=64 time=0.553 ms
64 bytes from 192.168.20.5: icmp_req=3 ttl=64 time=0.424 ms
^C
--- 192.168.20.5 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.424/1.571/3.738/1.533 ms











/dev/pts/2
08:57:24




#ping 192.168.20.5


PING 192.168.20.5 (192.168.20.5) 56(84) bytes of data.
64 bytes from 192.168.20.5: icmp_req=1 ttl=64 time=3.73 ms
64 bytes from 192.168.20.5: icmp_req=2 ttl=64 time=0.553 ms
64 bytes from 192.168.20.5: icmp_req=3 ttl=64 time=0.424 ms
^C
--- 192.168.20.5 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.424/1.571/3.738/1.533 ms











/dev/pts/1
08:57:43




#ping 192.168.10.5





PING 192.168.10.5 (192.168.10.5) 56(84) bytes of data.
64 bytes from 192.168.10.5: icmp_req=1 ttl=64 time=0.330 ms
64 bytes from 192.168.10.5: icmp_req=2 ttl=64 time=0.471 ms
64 bytes from 192.168.10.5: icmp_req=3 ttl=64 time=0.345 ms
^C
--- 192.168.10.5 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1999ms
rtt min/avg/max/mdev = 0.330/0.382/0.471/0.063 ms











/dev/pts/2
08:57:43




#ping 192.168.10.5


PING 192.168.10.5 (192.168.10.5) 56(84) bytes of data.
64 bytes from 192.168.10.5: icmp_req=1 ttl=64 time=0.330 ms
64 bytes from 192.168.10.5: icmp_req=2 ttl=64 time=0.471 ms
64 bytes from 192.168.10.5: icmp_req=3 ttl=64 time=0.345 ms
^C
--- 192.168.10.5 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 1999ms
rtt min/avg/max/mdev = 0.330/0.382/0.471/0.063 ms











/dev/pts/1
08:57:49




#ping 192.168.20.2





PING 192.168.20.2 (192.168.20.2) 56(84) bytes of data.
64 bytes from 192.168.20.2: icmp_req=1 ttl=64 time=0.478 ms
64 bytes from 192.168.20.2: icmp_req=2 ttl=64 time=0.348 ms
^C
--- 192.168.20.2 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.348/0.413/0.478/0.065 ms











/dev/pts/2
08:57:49




#ping 192.168.20.2


PING 192.168.20.2 (192.168.20.2) 56(84) bytes of data.
64 bytes from 192.168.20.2: icmp_req=1 ttl=64 time=0.478 ms
64 bytes from 192.168.20.2: icmp_req=2 ttl=64 time=0.348 ms
^C
--- 192.168.20.2 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.348/0.413/0.478/0.065 ms











/dev/pts/1
08:57:58




#ping 192.168.10.2





PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
From 192.168.10.3 icmp_seq=2 Destination Host Unreachable
From 192.168.10.3 icmp_seq=3 Destination Host Unreachable
From 192.168.10.3 icmp_seq=4 Destination Host Unreachable
^C
--- 192.168.10.2 ping statistics ---
6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5010ms
pipe 3











/dev/pts/2
08:57:58




#ping 192.168.10.2





PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
From 192.168.10.3 icmp_seq=2 Destination Host Unreachable
From 192.168.10.3 icmp_seq=3 Destination Host Unreachable
From 192.168.10.3 icmp_seq=4 Destination Host Unreachable
^C
--- 192.168.10.2 ping statistics ---
6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5010ms
pipe 3











/dev/pts/1
08:58:06




#ssh root@10.0.35.3





ssh: connect to host 10.0.35.3 port 22: No route to host











/dev/pts/2
08:58:06




#ssh root@10.0.35.3





ssh: connect to host 10.0.35.3 port 22: No route to host











/dev/pts/1
08:58:48




#ssh root@10.0.35.43





The authenticity of host '10.0.35.43 (10.0.35.43)' can't be established.
RSA key fingerprint is ed:f4:68:7b:f5:47:20:ad:03:fb:87:0a:c8:10:14:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.0.35.43' (RSA) to the list of known hosts.
root@10.0.35.43's password:
Linux debian3 2.6.39-bpo.2-686-pae #1 SMP Thu Aug 4 11:02:22 UTC 2011 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Tue Feb 21 16:55:02 2012 from debian5.local
l3-agent is already running: pid=2593; pidfile=/root/.lilalo/l3-agent.pid











/dev/pts/2
08:58:48




#ssh root@10.0.35.43


The authenticity of host '10.0.35.43 (10.0.35.43)' can't be established.
RSA key fingerprint is ed:f4:68:7b:f5:47:20:ad:03:fb:87:0a:c8:10:14:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.0.35.43' (RSA) to the list of known hosts.
root@10.0.35.43's password:
Linux debian3 2.6.39-bpo.2-686-pae #1 SMP Thu Aug 4 11:02:22 UTC 2011 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Tue Feb 21 16:55:02 2012 from debian5.local
l3-agent is already running: pid=2593; pidfile=/root/.lilalo/l3-agent.pid











/dev/pts/1
08:59:02




#ifconfig





eth0      Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:10.0.35.43  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::207:e9ff:fe0c:4511/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12902 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1260 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1177193 (1.1 MiB)  TX bytes:537866 (525.2 KiB)
eth0.10   Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:192.168.10.3  Bcast:192.168.10.255  Mask:255.255.255.0
...
          collisions:0 txqueuelen:0
          RX bytes:2921 (2.8 KiB)  TX bytes:6807 (6.6 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:333 errors:0 dropped:0 overruns:0 frame:0
          TX packets:333 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:34125 (33.3 KiB)  TX bytes:34125 (33.3 KiB)











/dev/pts/2
08:59:02




#ifconfig





eth0      Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:10.0.35.43  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::207:e9ff:fe0c:4511/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12902 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1260 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1177193 (1.1 MiB)  TX bytes:537866 (525.2 KiB)
eth0.10   Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:192.168.10.3  Bcast:192.168.10.255  Mask:255.255.255.0
...
          collisions:0 txqueuelen:0
          RX bytes:2921 (2.8 KiB)  TX bytes:6807 (6.6 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:333 errors:0 dropped:0 overruns:0 frame:0
          TX packets:333 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:34125 (33.3 KiB)  TX bytes:34125 (33.3 KiB)











/dev/pts/6
08:59:02




#ifconfig


eth0      Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:10.0.35.43  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::207:e9ff:fe0c:4511/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12902 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1260 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1177193 (1.1 MiB)  TX bytes:537866 (525.2 KiB)
eth0.10   Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:192.168.10.3  Bcast:192.168.10.255  Mask:255.255.255.0
...
          collisions:0 txqueuelen:0
          RX bytes:2921 (2.8 KiB)  TX bytes:6807 (6.6 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:333 errors:0 dropped:0 overruns:0 frame:0
          TX packets:333 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:34125 (33.3 KiB)  TX bytes:34125 (33.3 KiB)











/dev/pts/1
08:59:04




#exit





exit
Connection to 10.0.35.43 closed.











/dev/pts/2
08:59:04




#exit


exit
Connection to 10.0.35.43 closed.











/dev/pts/1
09:01:06




#ssh root@10.0.35.42





The authenticity of host '10.0.35.42 (10.0.35.42)' can't be established.
RSA key fingerprint is 0f:49:e2:89:e8:dd:b3:dc:b3:00:35:21:d9:ec:b3:0e.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.0.35.42' (RSA) to the list of known hosts.
root@10.0.35.42's password:
Linux debian2 2.6.39-bpo.2-686-pae #1 SMP Thu Aug 4 11:02:22 UTC 2011 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Feb 22 09:59:26 2012 from 10.0.35.40
l3-agent is already running: pid=2911; pidfile=/root/.lilalo/l3-agent.pid











/dev/pts/2
09:01:06




#ssh root@10.0.35.42


The authenticity of host '10.0.35.42 (10.0.35.42)' can't be established.
RSA key fingerprint is 0f:49:e2:89:e8:dd:b3:dc:b3:00:35:21:d9:ec:b3:0e.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.0.35.42' (RSA) to the list of known hosts.
root@10.0.35.42's password:
Linux debian2 2.6.39-bpo.2-686-pae #1 SMP Thu Aug 4 11:02:22 UTC 2011 i686
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Feb 22 09:59:26 2012 from 10.0.35.40
l3-agent is already running: pid=2911; pidfile=/root/.lilalo/l3-agent.pid











/dev/pts/1
09:01:16




#ifconfig





eth0      Link encap:Ethernet  HWaddr 00:0f:fe:7e:b9:2f
          inet addr:10.0.35.42  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::20f:feff:fe7e:b92f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:32788 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16030 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:11908274 (11.3 MiB)  TX bytes:2318519 (2.2 MiB)
          Interrupt:19 Memory:f0180000-f01a0000
eth0.10   Link encap:Ethernet  HWaddr 00:0f:fe:7e:b9:2f
...
          collisions:0 txqueuelen:0
          RX bytes:6122 (5.9 KiB)  TX bytes:26143 (25.5 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:104 errors:0 dropped:0 overruns:0 frame:0
          TX packets:104 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:9081 (8.8 KiB)  TX bytes:9081 (8.8 KiB)











/dev/pts/2
09:01:16




#ifconfig


eth0      Link encap:Ethernet  HWaddr 00:0f:fe:7e:b9:2f
          inet addr:10.0.35.42  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::20f:feff:fe7e:b92f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:32788 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16030 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:11908274 (11.3 MiB)  TX bytes:2318519 (2.2 MiB)
          Interrupt:19 Memory:f0180000-f01a0000
eth0.10   Link encap:Ethernet  HWaddr 00:0f:fe:7e:b9:2f
...
          collisions:0 txqueuelen:0
          RX bytes:6122 (5.9 KiB)  TX bytes:26143 (25.5 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:104 errors:0 dropped:0 overruns:0 frame:0
          TX packets:104 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:9081 (8.8 KiB)  TX bytes:9081 (8.8 KiB)











/dev/pts/1
09:01:18




#ifconfig





eth0      Link encap:Ethernet  HWaddr 00:0f:fe:7e:b9:2f
          inet addr:10.0.35.42  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::20f:feff:fe7e:b92f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:33863 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16231 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:11998083 (11.4 MiB)  TX bytes:2349925 (2.2 MiB)
          Interrupt:19 Memory:f0180000-f01a0000
eth0.10   Link encap:Ethernet  HWaddr 00:0f:fe:7e:b9:2f
...
          collisions:0 txqueuelen:0
          RX bytes:6122 (5.9 KiB)  TX bytes:26143 (25.5 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:104 errors:0 dropped:0 overruns:0 frame:0
          TX packets:104 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:9081 (8.8 KiB)  TX bytes:9081 (8.8 KiB)











/dev/pts/2
09:01:18




#ifconfig


eth0      Link encap:Ethernet  HWaddr 00:0f:fe:7e:b9:2f
          inet addr:10.0.35.42  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::20f:feff:fe7e:b92f/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:33863 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16231 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:11998083 (11.4 MiB)  TX bytes:2349925 (2.2 MiB)
          Interrupt:19 Memory:f0180000-f01a0000
eth0.10   Link encap:Ethernet  HWaddr 00:0f:fe:7e:b9:2f
...
          collisions:0 txqueuelen:0
          RX bytes:6122 (5.9 KiB)  TX bytes:26143 (25.5 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:104 errors:0 dropped:0 overruns:0 frame:0
          TX packets:104 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:9081 (8.8 KiB)  TX bytes:9081 (8.8 KiB)











/dev/pts/8
09:01:56




#ping 192.168.10.2





PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
64 bytes from 192.168.10.2: icmp_req=1 ttl=64 time=1.52 ms
64 bytes from 192.168.10.2: icmp_req=2 ttl=64 time=0.308 ms
64 bytes from 192.168.10.2: icmp_req=3 ttl=64 time=0.425 ms
64 bytes from 192.168.10.2: icmp_req=4 ttl=64 time=0.300 ms
64 bytes from 192.168.10.2: icmp_req=5 ttl=64 time=0.174 ms
64 bytes from 192.168.10.2: icmp_req=6 ttl=64 time=0.304 ms
64 bytes from 192.168.10.2: icmp_req=7 ttl=64 time=0.427 ms
64 bytes from 192.168.10.2: icmp_req=8 ttl=64 time=0.298 ms
64 bytes from 192.168.10.2: icmp_req=9 ttl=64 time=0.420 ms
...
64 bytes from 192.168.10.2: icmp_req=12 ttl=64 time=0.537 ms
64 bytes from 192.168.10.2: icmp_req=13 ttl=64 time=0.412 ms
64 bytes from 192.168.10.2: icmp_req=14 ttl=64 time=0.284 ms
64 bytes from 192.168.10.2: icmp_req=15 ttl=64 time=0.404 ms
64 bytes from 192.168.10.2: icmp_req=16 ttl=64 time=0.276 ms
64 bytes from 192.168.10.2: icmp_req=17 ttl=64 time=0.384 ms
^C
--- 192.168.10.2 ping statistics ---
17 packets transmitted, 17 received, 0% packet loss, time 16000ms
rtt min/avg/max/mdev = 0.174/0.421/1.522/0.288 ms











/dev/pts/7
09:01:56




#ping 192.168.10.2


PING 192.168.10.2 (192.168.10.2) 56(84) bytes of data.
64 bytes from 192.168.10.2: icmp_req=1 ttl=64 time=1.52 ms
64 bytes from 192.168.10.2: icmp_req=2 ttl=64 time=0.308 ms
64 bytes from 192.168.10.2: icmp_req=3 ttl=64 time=0.425 ms
64 bytes from 192.168.10.2: icmp_req=4 ttl=64 time=0.300 ms
64 bytes from 192.168.10.2: icmp_req=5 ttl=64 time=0.174 ms
64 bytes from 192.168.10.2: icmp_req=6 ttl=64 time=0.304 ms
64 bytes from 192.168.10.2: icmp_req=7 ttl=64 time=0.427 ms
64 bytes from 192.168.10.2: icmp_req=8 ttl=64 time=0.298 ms
64 bytes from 192.168.10.2: icmp_req=9 ttl=64 time=0.420 ms
...
64 bytes from 192.168.10.2: icmp_req=12 ttl=64 time=0.537 ms
64 bytes from 192.168.10.2: icmp_req=13 ttl=64 time=0.412 ms
64 bytes from 192.168.10.2: icmp_req=14 ttl=64 time=0.284 ms
64 bytes from 192.168.10.2: icmp_req=15 ttl=64 time=0.404 ms
64 bytes from 192.168.10.2: icmp_req=16 ttl=64 time=0.276 ms
64 bytes from 192.168.10.2: icmp_req=17 ttl=64 time=0.384 ms
^C
--- 192.168.10.2 ping statistics ---
17 packets transmitted, 17 received, 0% packet loss, time 16000ms
rtt min/avg/max/mdev = 0.174/0.421/1.522/0.288 ms











/dev/pts/1
09:02:07




#ps aux | grep l3





root      2911  0.3  0.1  13072  8964 ?        Ss   09:57   0:01 l3-agent
root      3438  0.0  0.0   3912   736 pts/6    S+   10:03   0:00 grep l3











/dev/pts/2
09:02:07




#ps aux | grep l3


root      2911  0.3  0.1  13072  8964 ?        Ss   09:57   0:01 l3-agent
root      3438  0.0  0.0   3912   736 pts/6    S+   10:03   0:00 grep l3











/dev/pts/1
09:03:48




#vim /etc/network/interfaces













/dev/pts/2
09:03:48




#vim /etc/network/interfaces










/dev/pts/2
09:11:49




#ifdown eth0





ifdown: interface eth0 not configured











/dev/pts/1
09:11:49




#ifdown eth0


ifdown: interface eth0 not configured











/dev/pts/2
09:12:00




#ifconifg





bash: ifconifg: command not found











/dev/pts/1
09:12:00




#ifconifg





bash: ifconifg: command not found











/dev/pts/2
09:12:06




#ifconfig





eth0      Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:10.0.35.43  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::207:e9ff:fe0c:4511/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:29414 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2437 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2577273 (2.4 MiB)  TX bytes:663983 (648.4 KiB)
eth0.10   Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:192.168.10.3  Bcast:192.168.10.255  Mask:255.255.255.0
...
          collisions:0 txqueuelen:0
          RX bytes:9935 (9.7 KiB)  TX bytes:6890 (6.7 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:430 errors:0 dropped:0 overruns:0 frame:0
          TX packets:430 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:43701 (42.6 KiB)  TX bytes:43701 (42.6 KiB)











/dev/pts/1
09:12:06




#ifconfig


eth0      Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:10.0.35.43  Bcast:10.0.35.255  Mask:255.255.255.0
          inet6 addr: fe80::207:e9ff:fe0c:4511/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:29414 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2437 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:2577273 (2.4 MiB)  TX bytes:663983 (648.4 KiB)
eth0.10   Link encap:Ethernet  HWaddr 00:07:e9:0c:45:11
          inet addr:192.168.10.3  Bcast:192.168.10.255  Mask:255.255.255.0
...
          collisions:0 txqueuelen:0
          RX bytes:9935 (9.7 KiB)  TX bytes:6890 (6.7 KiB)
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:430 errors:0 dropped:0 overruns:0 frame:0
          TX packets:430 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:43701 (42.6 KiB)  TX bytes:43701 (42.6 KiB)











/dev/pts/2
09:12:08




#ifdown eth0





ifdown: interface eth0 not configured











/dev/pts/1
09:12:08




#ifdown eth0


ifdown: interface eth0 not configured











/dev/pts/2
09:12:22




#vim /etc/network/interfaces





--- /tmp/l3-saved-3925.28997.2311	2012-02-22 10:12:40.000000000 +0200
+++ /etc/network/interfaces	2012-02-22 10:14:20.000000000 +0200
@@ -2,11 +2,11 @@
 # and how to activate them. For more information, see interfaces(5).
 
 # The loopback network interface
-auto lo eth0.10 eth0.20
+auto lo eth0.30 eth0.40
 iface lo inet loopback
 
 # The primary network interface
-allow-hotplug eth0 eth0.10 eth0.20
+allow-hotplug eth0 eth0.30 eth0.40
 iface eth0 inet static
 	address 10.0.35.43
 	netmask 255.255.255.0
@@ -16,12 +16,10 @@
 	# dns-* options are implemented by the resolvconf package, if installed
 	dns-nameservers 10.0.35.1
 	dns-search unix.nt
-iface eth0.10 inet static
-	address 192.168.10.3
+iface eth0.30 inet static
+	address 192.168.30.3
 	netmask 255.255.255.0
-	broadcast 192.168.10.255
-iface eth0.20 inet static
-	address 192.168.20.3
+iface eth0.40 inet static
+	address 192.168.40.3
 	netmask 255.255.255.0
-	broadcast 192.168.20.255
 









/dev/pts/1
09:12:22




#vim /etc/network/interfaces








Статистика
Время первой команды журнала16:41:35 2012- 2-21
Время последней команды журнала09:12:22 2012- 2-22
Количество командных строк в журнале101
Процент команд с ненулевым кодом завершения, %23.76
Процент синтаксически неверно набранных команд, % 1.98
Суммарное время работы с терминалом *, час 0.56
Количество командных строк в единицу времени, команда/мин 2.99
Частота использования команд
ping36|==================================| 34.29%
ifconfig17|================| 16.19%
route8|=======|  7.62%
ssh6|=====|  5.71%
ip6|=====|  5.71%
ifdown4|===|  3.81%
mii-tool4|===|  3.81%
vim4|===|  3.81%
ps2|=|  1.90%
nslookup2|=|  1.90%
less2|=|  1.90%
grep2|=|  1.90%
/etc/init.d//networking2|=|  1.90%
host2|=|  1.90%
init2|=|  1.90%
ifconifg2|=|  1.90%
exit2|=|  1.90%
reboot2|=|  1.90%
____
*) Интервалы неактивности длительностью 30 минут и более не учитываются
Справка
    Для того чтобы использовать LiLaLo, не нужно знать ничего особенного:
    всё происходит само собой.
    Однако, чтобы ведение и последующее использование журналов
    было как можно более эффективным, желательно иметь в виду следующее:
    
    
    
  1.  
    В журнал автоматически попадают все команды, данные в любом терминале системы.
    
    2. 
    
  2. 
    Для того чтобы убедиться, что журнал на текущем терминале ведётся, 
    и команды записываются, дайте команду w.
    В поле WHAT, соответствующем текущему терминалу, 
    должна быть указана программа script.
    
    3. 
    
  3. 
    Команды, при наборе которых были допущены синтаксические ошибки, 
    выводятся перечёркнутым текстом:

    

    


    $ l s-l
    

    bash: l: command not found

    
    		

    

    

    
    
    4. 
    
  4. 
    Если код завершения команды равен нулю, 
    команда была выполнена без ошибок.
    Команды, код завершения которых отличен от нуля, выделяются цветом.

    

    


    $ test 5 -lt 4
    

    		

    

    
    Обратите внимание на то, что код завершения команды может быть отличен от нуля
    не только в тех случаях, когда команда была выполнена с ошибкой.
    Многие команды используют код завершения, например, для того чтобы показать результаты проверки

    
    
    5. 
    
  5. 
    Команды, ход выполнения которых был прерван пользователем, выделяются цветом.

    

    


    $ find / -name abc
    

    find: /home/devi-orig/.gnome2: Keine Berechtigung
find: /home/devi-orig/.gnome2_private: Keine Berechtigung
find: /home/devi-orig/.nautilus/metafiles: Keine Berechtigung
find: /home/devi-orig/.metacity: Keine Berechtigung
find: /home/devi-orig/.inkscape: Keine Berechtigung
^C

    
    		

    

    

    
    
    6. 
    
  6. 
    Команды, выполненные с привилегиями суперпользователя,
    выделяются слева красной чертой.

    

    


    # id
    

    uid=0(root) gid=0(root) Gruppen=0(root)

    
    		

    

    
    
    
    
    7. 
    
  7. 
    Изменения, внесённые в текстовый файл с помощью редактора, 
    запоминаются и показываются в журнале в формате ed.
    Строки, начинающиеся символом "<", удалены, а строки,
    начинающиеся символом ">" -- добавлены.

    

    


    $ vi ~/.bashrc
    

    2a3,5
>    if [ -f /usr/local/etc/bash_completion ]; then
>         . /usr/local/etc/bash_completion
>        fi

    		

    

    
    
    
    
    8. 
    
  8. 
    Для того чтобы изменить файл в соответствии с показанными в диффшоте
    изменениями, можно воспользоваться командой patch.
    Нужно скопировать изменения, запустить программу patch, указав в
    качестве её аргумента файл, к которому применяются изменения,
    и всавить скопированный текст:

    

    


    $ patch ~/.bashrc
    
    		

    

    
    В данном случае изменения применяются к файлу ~/.bashrc
    
    9. 
    
  9. 
    Для того чтобы получить краткую справочную информацию о команде, 
    нужно подвести к ней мышь. Во всплывающей подсказке появится краткое
    описание команды.
    
    
    
    
    Если справочная информация о команде есть, 
    команда выделяется голубым фоном, например: vi.
    Если справочная информация отсутствует,
    команда выделяется розовым фоном, например: notepad.exe.
    Справочная информация может отсутствовать в том случае, 
    если (1) команда введена неверно; (2) если распознавание команды LiLaLo выполнено неверно;
    (3) если информация о команде неизвестна LiLaLo.
    Последнее возможно для редких команд.
    
    10. 
    
  10. 
    Большие, в особенности многострочные, всплывающие подсказки лучше 
    всего показываются браузерами KDE Konqueror, Apple Safari и Microsoft Internet Explorer.
    В браузерах Mozilla и Firefox они отображаются не полностью, 
    а вместо перевода строки выводится специальный символ.
    
    11. 
    
  11. 
    Время ввода команды, показанное в журнале, соответствует времени 
    начала ввода командной строки, которое равно тому моменту, 
    когда на терминале появилось приглашение интерпретатора
    
    12. 
    
  12. 
    Имя терминала, на котором была введена команда, показано в специальном блоке.
    Этот блок показывается только в том случае, если терминал
    текущей команды отличается от терминала предыдущей.
    
    13. 
    
  13. 
    Вывод не интересующих вас в настоящий момент элементов журнала,
    таких как время, имя терминала и других, можно отключить.
    Для этого нужно воспользоваться формой управления журналом
    вверху страницы.
    
    14. 
    
  14. 
    Небольшие комментарии к командам можно вставлять прямо из командной строки.
    Комментарий вводится прямо в командную строку, после символов #^ или #v.
    Символы ^ и v показывают направление выбора команды, к которой относится комментарий:
    ^ - к предыдущей, v - к следующей.
    Например, если в командной строке было введено:

    $ whoami

    

    user

    

    $ #^ Интересно, кто я?

    
    в журнале это будет выглядеть так:
    

    $ whoami

    

    user

    

    

      Интересно, кто я?
     
     
    
    15. 
    
  15. 
    Если комментарий содержит несколько строк,
    его можно вставить в журнал следующим образом:

    $ whoami

    

    user

    

    $ cat > /dev/null #^ Интересно, кто я?

    

    Программа whoami выводит имя пользователя, под которым 
мы зарегистрировались в системе.
-
Она не может ответить на вопрос о нашем назначении 
в этом мире.

    
    В журнале это будет выглядеть так:

    

    


    $ whoami
    

    user

    

    Интересно, кто я?
    
Программа whoami выводит имя пользователя, под которым
    
мы зарегистрировались в системе.
    

    
Она не может ответить на вопрос о нашем назначении
    
в этом мире.
    

    
    		

    

    
    Для разделения нескольких абзацев между собой
    используйте символ "-", один в строке.
    
    

    16. 
    
  16. 
    Комментарии, не относящиеся непосредственно ни к какой из команд, 
    добавляются точно таким же способом, только вместо симолов #^ или #v 
    нужно использовать символы #=
    
    17. 

    
  17. 
    Содержимое файла может быть показано в журнале.
    Для этого его нужно вывести с помощью программы cat.
    Если вывод команды отметить симоволами #!, 
    содержимое файла будет показано в журнале
    в специально отведённой для этого секции.
    
    18. 

    
    
    
  18. 
    Для того чтобы вставить скриншот интересующего вас окна в журнал,
    нужно воспользоваться командой l3shot.
    После того как команда вызвана, нужно с помощью мыши выбрать окно, которое
    должно быть в журнале.
    
    19. 
    
    

    
    
    
  19. 
    Команды в журнале расположены в хронологическом порядке.
    Если две команды давались одна за другой, но на разных терминалах,
    в журнале они будут рядом, даже если они не имеют друг к другу никакого отношения.

    1
    2
3   
    4

    
    Группы команд, выполненных на разных терминалах, разделяются специальной линией.
    Под этой линией в правом углу показано имя терминала, на котором выполнялись команды.
    Для того чтобы посмотреть команды только одного сенса, 
    нужно щёкнуть по этому названию.
    
    20. 
    
    



О программе
    

    LiLaLo (L3) расшифровывается как Live Lab Log.

    Программа разработана для повышения эффективности обучения Unix/Linux-системам.

    (c) Игорь Чубин, 2004-2008

    

$Id$